1. Removal of sliding door and frame: Carefully dismantle and remove both glass sliding door panels, the aluminium frame, tracks, and associated fittings without damaging them. 2. Storage: All removed components are to be retained and stored safely onsite for potential reinstallation or reuse in the future. 3. Making good the opening: Following removal, repair and finish all areas previously occupied by the door frame, including the sides and top of the opening. The floor wlll be tiled by others afterwards. 4. Timber finishing and boxed surrounds: Use suitable timber to box in and neatly finish the exposed sides and top of the opening, concealing any cavities, gaps, fixings or unfinished surfaces left by the removal. 5. Floor and threshold repairs: Remove the existing bottom track and make good the floor area, providing a neat, level and safe transition between the adjoining tiled areas for future tiling by others. 6. Final finish: All surfaces are to be neatly finished, with appropriate trims, filling and painting where required, to match the surrounding area as closely as practical. Desired outcome: The existing doorway is to remain as an open passageway, with no door or frame installed. The finished opening should look clean, professional and intentional.