A flat in Wapping, E1W. I'm looking for a qualified, registered electrician (NICEIC/NAPIT or similar, Part P) for a few jobs. Photos with notes attached (E1–E7). 1. Hallway: remove an old storage heater (Unidare WMC724N combination unit, very heavy). Fit a new Dimplex PLXC300E 3 kW panel heater (supplied), hardwired on a fused spur on the 24h supply. 2. Hallway: the old heater seems to be plugged into an ordinary socket. Disconnect it, provide the spur, and replace the damaged socket faceplate. 3. Consumer unit: separate Economy 7 section (water heater, storage heater, unlabelled B40). Since a smart meter was fitted in 2021, I suspect the E7 section is live 24/7. Please check and advise. Also identify and label the unlabelled breakers. 4. Immersion (unvented cylinder, 3 kW): the switch, Smiths timer and Boost look like they're wired in series (Boost off = timer off). I'd like timed off-peak heating with Boost as a separate one-off. A digital immersion timer is fine. 5. Living room: new socket below a wall-mounted electric fire (1.8 kW, 13A plug), about 40–45 cm from the floor. Spur from the alcove socket, chased round a brick chimney breast corner (about 1 m). Dust extraction please. Making good and painting will be done by someone else. 6. Bathroom: replace the faulty mirror-cabinet light with a new cabinet-mounted LED light, plus a battery-free kinetic wireless switch kit (both supplied). Fit the 230V receiver in a safe location and tidy the loose flex. 7. Under the stairs: decommission and remove an old Honeywell/Ademco VISTA alarm panel (12V battery) and keypad, and isolate or blank its spur. The external bell box is at first-floor height: disable it first, then remove it (long ladder needed). Our Ring alarm is separate, so please leave it. Please include certificates (Minor Works / EIC as needed), and remove the old heater and battery or quote for disposal. Timing: within the next 2 weeks.
0 new tasks