Photos of the existing connection and proposed design are attached. I'm looking for a licensed electrician to install a Ring Wired Video Doorbell 4K Pro (3rd Gen) at my front entrance in Rowville. Link https://ring.com/au/en/products/wired-doorbell-pro/color/deepsilver/power/plug-in/multipack/1-pack **Current Setup:** - Existing round, capped electrical fitting with 240V supply (photo attached). - Located on an exterior rendered Hebel wall, under a roof and protected from direct rain. - Main electrical switchboard is a considerable distance away. - I want to reuse the existing 240V connection without running new wiring from the switchboard. **Proposed Installation:** 1. Remove the existing round fitting and assess the 240V supply. 2. Install a suitable 240V-to-24V AC transformer (30–40VA recommended for the Ring). 3. House the transformer in the smallest suitable outdoor-rated weatherproof enclosure, ideally around 150 × 150 × 120 mm, subject to electrical compliance. 4. Position the enclosure over the existing fitting to conceal missing render. 5. Have a custom faceplate manufactured to conceal the enclosure, with the Ring mounted centrally on the front. **Proposed Faceplate:** - Approx. 200 W × 220 H × 145 D mm. - Dimensions are flexible depending on the transformer and enclosure requirements. - Must allow safe servicing, weather protection and adequate ventilation. **What I Need:** - Confirm feasibility of the proposed installation. - Recommend the smallest compliant transformer/enclosure combination. - Confirm final dimensions for the custom faceplate. - Supply and install electrical components and Ring doorbell. - Provide a Certificate of Electrical Safety. **Important:** I already own the Ring doorbell. My priority is a neat, compact installation without visible wiring or a bulky electrical box. Please quote for assessment, supply and installation, and advise if you recommend a better solution.
0 new tasks