Van/camper fitter or carpenter wanted for a 2017 Toyota HiAce LWB low roof. I have a detailed fitout plan, drawings, cut list, sheet layouts and shopping list. Check the van and equipment and confirm materials and fixings before I order. I’ll buy and arrange delivery or collection. You supply tools and labour for measuring, cutting, assembly, fitting and testing. * Fit floor battens, insulation, plywood subfloor and vinyl. Insulate and line the fixed walls and roof in plain ply. * Build and secure a 1,900 × 1,100 mm timber bed, deck 410 mm above finished floor. Reuse my mattress. Fit two timber dividers for a 350 mm-deep open front cubby, top-access middle bay and two 700 mm rear drawers. Fit four removable deck covers, four separate side lids, catches and travel restraints. * Fit a battery cabinet behind the driver and adjacent utility box. Reuse the auxiliary battery in its NOCO case and the BLUETTI EB70 above. Remove the EB70, then the cabinet top, for battery access. * Fit/check JTM roof bars, mount the Kings 200 W solar panel on its brackets and fit the SAN HIMA roof vent and weatherproof cable entry. Protect cut edges, seal and leak-test. * Install protected, accessible cable routes before closing the lining. If quoting for 12 V work, check/restore starter-to-aux charging, repair aux-to-EB70 charging and connect/test solar and vent with suitable protection. Otherwise, coordinate cable access and timing with my family friend. * Finish and secure timber, fit hardware and check drawers, lids, hatches, restraints and equipment access. Quote all prep and installation labour. State whether 12 V work is included and list any materials or specialist work excluded. Allow time for measuring, pre-cutting, coating/drying, final scribing, fixing, sealing and testing. One main fitting day is ideal if realistic. Timing is flexible. Please share relevant experience, examples, what you’d prep beforehand, estimated duration and availability. More docs available on request.