Open

Assigned

Completed

Build a side fence, gate and screening for pool equipment

Posted by

Tammy N.

Location

Caulfield VIC 3162, Australia

To be done on

Before Thu, 10 DecAnytime

Build a side fence, gate and screening for pool equipment

$2,500

Details

We’re looking for a suitably qualified tradesperson to install two sections of slanted-top picket (see images of existing front fence and gate) fencing with matching gates, plus Merbau batten screening around our pool equipment. Please refer to the attached photos and updated mock-ups. End of driveway: Total width: 3500 mm, including a 1200 mm wide gate. Remaining 2300 mm for fixed fencing and posts. Gate on the left beside the house, as shown in the photo. Fence and gate height: 1750 mm. Other side of the house: Total width: 1470 mm, including a 900 mm wide gate. Remaining 570 mm for fixed fencing and posts. Fixed fencing on the right beside the house. Gate on the left, hinged at the boundary-fence side so it opens towards the side fence. Fence and gate height: 1750 mm. Both fences and gates must match the slanted-top picket style of our existing front fence. Posts are to be concealed behind the pickets. When each gate is closed, the picket heights and spacing must align to create a continuous, even pattern across the full width, with no exposed posts interrupting it or extending above it. We already have the galvanized steel frames for both gates, which are adjustable. Pool equipment screening: Two-sided, L-shaped screen, approximately 1000 mm × 2000 mm. Merbau batten screening panels on a post-and-rail frame. Allow for equipment ventilation and access for servicing. Painting is not required. The bright colours in the mock-ups are for illustration only. Please quote for the remaining materials, hardware and installation, and advise your availability. All measurements are to be confirmed on site. The listed budget is indicative only. We invite suitably qualified tradespeople to quote for the work.

0 new tasks
To see more tasks
or