Find a professional hot water system contractor in Sydney Northern Beaches

Fill in a short form and get free quotes for local hot water system contractors in Sydney Northern Beaches

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated Hot Water System Installers near me

Recent Hot Water System Installation & Repair reviews in Sydney Northern Beaches

"Amazing, highest rating possible! Went every extra mile that he could, I really appreciate all that he did. "

Leaking shower hot water tap - manly

$60

"showed up on time, professional, completed the job as indicated with no fuss or bother. Good attention to detail ie took the time to test everything and cleaned up as well. Would definitely hire again. "

Install new hot water tank

$400

"Punctual, reliable and friendly. Highly recommended!"

Plumber needed to connect the hot water tank

$80

"HE IS BEST EVER PLUMBER , BEST JOB , I SUGGEST HE TO ALL "

HOT WATER HEATER CONNECTION

$150

"Chris provided an exceptional quality of service. He was reliable, professional and ensured the job was carried out safely and to code. "

Install external GPO for gas hot water system

$70

"Great service, honest and prompt! Highly recommended "

Plumber / Hot Water Engineer

$90

What's the average cost of a Hot Water System Installer in Sydney Northern Beaches

$127 - $250

low

$127

median

$164

high

$250

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Sydney Northern Beaches

based on 20 reviews

5

20
0
0
0
0

What is Airtasker?

1

Post your task

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Sydney Northern Beaches

Help move a hot water tank.

$150

Frenchs Forest NSW, Australia

29th Aug 2022

Assist myself to trolley a hot water tank to the front of a property. 1 hours work - Due date: Needs to be done on Tuesday, 30 August 2022

Replace hot water system

$1,800

Elanora Heights NSW, Australia

3rd Apr 2022

Replace install hot water system for house, 5 people. ASAP please. - Due date: Before Wednesday, 6 April 2022

Hot water not working

$100

Warriewood, NSW

14th Dec 2021

We have a gas Rheem hot water system at our house at Warriewood (Northern Beaches) which has just stopped working. The error code which shows up is E1 and 51 (refer attached). Looking for someone to fix the problem so we can get hot water running again.

Camper van hot water plumbing

$350

Brookvale NSW, Australia

23rd Jul 2021

Need an outdoor electric shower, water heater and pump installing in a camper van conversion project.

Old hot water tank leaking - install new

$250

Beacon Hill, New South Wales, Australia

3rd May 2021

our old water tank is leaking. had turned the main supply on and off for some other work, this seems to have caused the issue. can see corrosion in the tank. would like it replaced as it is old, rather than repaired. details of the boiler and location in the photos. Total is for labour, would like heater bought and i can reimburse. please add additional costs if needed, and explain - thanks.

Excellent and super quick. Nice guy too. Highly recommended to anyone needing a reliable plumber that's easy to deal with - not too many of them around!

Install a wifi timer to electric hot water tank

$150

Freshwater NSW, Australia

19th Mar 2021

I would like a wifi timer box to be installed so that we can have the hot water tank on a timer or able to be switched on and off with a wifi which. The wifi/timer could be installed either externally next to the hot water tank or an internally in the laundry immediately next to the external hot water tank.

Plumbing - add fitting to hot water pipes

$200

Belrose NSW 2085, Australia

11th Nov 2020

Some of the hot water pipes we have running under our house don't have (green?) Fitting. As they shrink back they hit the timber and it gets really noisy. We're looking for someone who can add fitting to these pipes. Also, some pipes are not tighten up correctly and running/stopping the water get really noisy, so we would like to get that fixed too. Under the house is easily accessible, at worst there is some crawling involved but nothing impossible.

Very professional and thorough in his work. Will use Craig again!

Small hot water system leak - quote and repair

$1,000

Fairlight NSW, Australia

1st Aug 2022

Small old hot water system cylinder is leaking at base repair or install new cylinder would be awesome fitting all good just un do and redo pretty straight forward - Due date: Before Thursday, 18 August 2022

Fix leak from hot water system

$150

North Balgowlah NSW 2093, Australia

4th Jan 2022

Hi There is a leak from the hot water system, seemingly coming from the external pipework. Need to leaked fixed.

Craig was timely and easy to deal with.

Hot water pressure very low

$150

Newport NSW, Australia

15th Nov 2021

This morning our hot water pressure in the whole house has become very low. Our hot water system is solar

Hot Water System - Tempering Valve

$140

North Manly NSW, Australia

9th Jul 2021

Looking for someone to replace a tempering valve on a Rinnai Infinity 26 Gas Hot Water System. I have the replacement valve, just looking for the install to be completed by someone who know’s what they’re doing. Located in North Manly, flexible with timings. Cheers, Matt

Easy to deal with, honest and reliable.

Fixed leaking hot water pipe

$250

Mosman, New South Wales, Australia

22nd Apr 2021

I have a small copper hot water pipe underneath my kitchen that will need to be fixed/replaced. It is only accessible via the crawl spade underneath the house, I went down to inspect and have taken a video to show the problem. In that way I have cleared the route of debris and spider webs. The approximate distance from the manhole to pipe is about 7-8 metres. The crawl space varies as the ground it's on is uneven. Ranges from 1 metre at it's tallest to about 70cm. Working to repair/replace the pipe may require being prone or sitting down. You will not be able to stand. When the hot water is turned off, the pipe no longer leaks. Which is currently is. Also have other smaller plumbing jobs in the kitchen which I would be happy to discuss if you accept this job. I have a proper video of the leak itself but Airtasker only allows photo. Happy to send video to you since that will help. Would like this fixed Friday or Saturday or Sunday but ASAP would be preferred Thank you

I wouldn't hesitate to hire Johnny again. Trust worthy, professional and a friendly guy. Great all around. Another plumber had given an astronomical estimate including work for things that weren't needed. Johnny just fixed what was needed and sent me a photo of the job after it was done. He also arrived super fast, has all the right gear and a kick arse looking truck to boot. Thanks again Johnny

Take an old hot water heater up 13 stairs

$50

Beacon Hill NSW, Australia

17th Jan 2021

The hot water heater is about 125kg and will require 2-3 people. We have a trolley that can be used. You are welcome to have it for free once it is moved. Heater name: Stiebel Eltron hot water heater.

Hot water in shower

$100

Balgowlah NSW, Australia

9th Sep 2022

No hot water in my shower - Due date: Needs to be done on Saturday, 10 September 2022

He was prompt and professional

Fix water heater, no hot water

$200

Manly NSW 2095, Australia

9th Jun 2022

1. The water is cold or sometimes warm. 2. Fire is on. 3. Fire level turned to maximum. 4. Need to be done asap.

Urgent plumber needed for leaking hot water tank

$300

Pymble, NSW

2nd Jan 2022

Hot water tank leaking and need to turn off and replace.

Mark was efficient and helpful and made himself available for an urgent job replacing our hot water system after it had burst. Would have him back again.

Remove 250L Hot Water Unit

$75

Balgowlah NSW, Australia

30th Aug 2021

I need someone to remove a hot water unit from Balgowlah

Fix electrical hot water system.

$75

Mosman, New South Wales, Australia

31st May 2021

Need my Rheem electric water heater fixed. It is no longer producing hot water. The relief valve has been regularly operated and still operates, previously it would release hot water but it doesn’t do that at the moment either. There didn’t seem to be a reset switch, so I’ve tried switching off the power at the fuse box. A broken section of the hot water piping was recently fixed but the hot water functioned normally for about two weeks after that.   The piping and plumbing seems to be in order and could be an electrical matter but would prefer to have someone who’s an expert to come out and check this out. Fee is only for call out, happy to discuss actual repair fee etc if needed. Would prefer to have this done ASAP

Fix hot water system

$75

Dee Why NSW, Australia

25th Mar 2021

Hot water tank / system is not working

Geoff was responsive and fixed our issue straight away!

Plumber for hot water repair

$200

Newport NSW, Australia

16th Dec 2020

Our electric system is constantly flowing needs repair.

Quick job done very well