Find and experienced emergency locksmith in NSW

locksmith locked out of house

An old Porsche 944 - 1983 with mecanical locks (no centerlock). I have managed to lock my keys inside. Anyone knows how to unlock this?

I have a 2014 i30 car but I misplaced the keys. Need one basic key made. The car is a write off so it’s going to be discarded. Car is in Toongabbie.

Create a hinged door/panel with a latch/lock to cover an access hole in the wall today - about 500x1000 mm

I lost my car tow bar key. I need a new one.

2003 Mazda Protege. When I unlock my car door with the key, the actual interior door lock pin doesn’t unlock fully, and I need to do it manually. If I do not do it manually I am locked in. Drivers side door unlocks all door so it’s annoying me. Happy to drive to you to make cheaper

New key and recode...VW Tiguan.

I need a replacement car key for my Holden commodore 2011

I have a virgin keycard that needs to be written to. I don’t have the cable or software but seems pretty straightforward. Car is a 2007 Renault Megane r26.

I need to move my old car but I lost the key for it. 2014 i30 I just need a basic key to turn on and move parking. Because car is damaged so will likely dispose of soon. What is the cheapest price I can get this done please send offer.

I locked out of my car need someone to open door asap in Liverpool

Hi, my car is 2015 mazda 3 with push to start button. I have the original key. Thank you!

Hi, my car key is not twisting and a have a light flashing of the keys in the car display, already tried spare keys and not working. Key enter but not twisting, need to be solve tomorrow morning, the car it’s a Mazda tribute 2003

Need a replacement key cut Toyota 2001 hilux possibly 2

Lost car keys need replacement Price negotiable

Locked my keys in my car, Hyundai accent 2000 manual key no central locking. Old fashioned. Need help asap

Like an idiot I locked my keys in an old Mazda truck. I recon a coat hanger should do it! Please help asap. Thanks I’m parked outside the Beresford on Bourke in case my battery dies…

Need car locksmith to open passenger rear left door and fix the lock for my genesis 2016.

We lost the only key we have for our Toyota Yaris 2006 - need replacement key We are Wollstonecraft/ Crown Nest 2065

the garage door belt is snapped off while opening, need someone to fix it. From the photo, it looks like the drive belt for your garage door opener has completely snapped off the trolley carriage. The garage door is a tilt door. The brand of the auto garage opener is Merlin.

I have 5 doors that needs replacement of the current ones to a new one. I can provide the new handle sets

Fix the bathroom door handle that have come off loose. Two such doors to fix. This does not require locksmith. This is to manually fix the handle to the wooden door .

The lock on my glass sliding door is broken and needs to be repaired or replaced. Looking for a handyman or locksmith to supply and install a suitable replacement lock if needed and ensure the door locks securely and operates correctly. Please provide a quote, including any parts required.

After opening a locked door. And it was stuck. Pulled and all scews came loose and whole casing is loose and needs at a ting again.

One of the hinges on front door needs replacement as the pin is out and not closing smoothly, it’s jamming as we close. Also have new digital handle door lock I want to install

The sliding door keeper is loose and hasn't been properly attached so is coming off the wall. The door sometimes fails to lock/unlock so most likely the whole lock will need to be replaced

The key goes halfway in as the lock mechanism is not working properly, impossible to lock/unlock correctly. May need adjustment, repair or replacement of the lock.

2003 Mazda Protege. When I unlock my car door with the key, the actual interior door lock pin doesn’t unlock fully, and I need to do it manually. If I do not do it manually I am locked in. Drivers side door unlocks all door so it’s annoying me. Happy to drive to you to make cheaper

I have an internal door handle (privacy lever with push button) that isn’t working properly. Issue: The handle is slightly sagging downward (not sitting level) The push-button lock only works when the handle is perfectly aligned, otherwise it won’t engage Likely cause is loose internal screws or worn mechanism What needs to be done: Remove handle and cover plate (concealed fix lever set) Inspect and tighten internal mounting screws Realign handle so it sits level Ensure the spring return is working correctly Test and fix push-button lock so it engages properly when the door is closed If the mechanism is faulty, advise if replacement is needed (and ideally install if I approve) Tools required: Basic hand tools (Allen keys, screwdriver set, something to fit in the hole to open the casing with) Experience with door handles / lock mechanisms Location: Elizabeth bay Parking: onsite guest spaces in parking garage (for vehicles under 2 metres) Timing: later in May, likely May 20 or 21 Experience required: Must have experience installing or repairing door handles/locks Familiar with concealed-fix lever handles General handyman or locksmith experience preferred Notes: This is a standard internal door (not a front/security door) I have a replacement door handle if this one is beyond repair

Door lock missing. Old heritage house. Suggestions for a quick fix welcome. Already has lock up top

The door and lock are barely 18 months old. The lock is not latching in most of the time requiring me to continually try and close the door for it to catch on. Meaning it is open and unlocked. Hoping someone can come out and fix

The existing key has snapped off, Its needs removal to get the door to open Need a replacement key for the lock,

Fix the door handle so that I can lock, at moment it doesn’t lock and when you pull it comes off

Older house with old front door lock that has come loose and can’t be screwed back in as there’s no longer any traction for the screws in the wooden holes. Looking for suggestions and help on if this lock could be repaired or replaced.

My door lock and handle have come loose and are pulling away from the door (see photo). I also need the lock cylinder replaced. Scope of work: Inspect the existing door lock and handle Properly refit and secure the loose lock Replace the lock cylinder (new keys required) Ensure the door locks and unlocks smoothly Notes: Existing door and handle to remain if possible Please advise whether repair + cylinder replacement is sufficient, or if a full lock replacement is required Quote to include labour + lock cylinder (total price) Experience with door locks required.

Hello! I have two doors that need the latches and potentially one handle fixed. One latch does not work at all (it is stuck), the other does, but doesn’t keep the door closed (it can be easily pushed open) and the handle is loose.

The front door mechanism just continues to rotate with a key inside. Instead of the key unlocking the door. I believe the mechanism may have broken and may need replacement. However, it could just need repair. Located in Paddington Sydney. Need this done Monday 19th as I can’t use the front door.

Door will shut and top latch will click in but the bottom lock will open and close with the key when the door is open but will not lock and turn when the door is closed. I believe the plate in the door frame needs to be adjusted / moved slightly for it to be able to go in and lock the door. We would rather repair this and not get a new handle.

Need help fixing my garage door lock (hubby tried installed but worn a screw, and the door appears too thin for the lock and is quite loose) and side gate that is stuck, and is at a very windy location that the lock piece at blent, will probably need a new system - please give me quote for the lock if necessary or you can let me know which one to buy from Bunnings - considering the $45 latch from Bunnings I can supply). Location Rouse Hill.

I need someone to fix the latch on my bedroom door and also put a lock onto it. I also need another door latch fixed. Looks like it may need another screw for it.