Find and experienced emergency locksmith in Melbourne Western Suburbs

Key cut only. No transponder needed. Car is locked and battery is dead. 2005 SX Territory with SZ Territory door. Already have a blank. Just need the key cut

Think our car keys are stuck in our boot and can’t get into the car

Car lock out - car needs to be opened to get the keys from the back seat

Lost car keys with remote control for a Nissan Dualis 2012. It has a plastic twist start, not key start. Key is currently lost, and the battery on the car is dead.

I have lost the keys to my 2010 Kia Rio and need a mobile locksmith to come to Deer Park to decode the lock and cut a replacement key. Car is unlocked and i can get the keycode from Kia dealership if that makes it easier for you. Additionally got a blank TOY40 key which i had ordered online. ​Vehicle: 2010 Kia Rio (Hatchback/Sedan) ​Location: Deer Park, VIC ​Issue: All keys lost (no spare key available). ​Proof of Ownership: Ready (myVicRoads Registration Certificate PDF + matching Victorian Driver Licence). Requirements: ​Supply and cut a working key to suit the door and ignition.

The car back door on the right can’t be unlocked it’s Toyota rav 4 2021 model

I already have the barrel just need it changed It’s a jayco expander

Spare Key for 2014 Hyundai i20 – $120 I’m looking for someone who can supply, cut and program a spare key for my 2014 Hyundai i20 Active manual. - I currently have one working key - Need one additional spare key - Key must be fully cut and programmed to the car - Remote buttons should work - Car is located in Altona North VIC 3025 but happy to come to you. - Budget: $100 Please let me know if you can do the complete job for $100, including the key, cutting and programming.

I need a spare car remote and key for my suzuki swift 2011. Its a push start car.

Car door locked due to long time not using.Foam key doesn't work. Manual key rotating 360 degree instead of unlocking

I lost my keys and I don’t know where it is I need someone to cut me a new one

Left car keys by mistake in car boot car locked Mazda 3 old model

I need a locksmith asap to open my ford ranger 2018 car boot as I left my car keys in the boot and the car is locked. The car boot has a keyhole. The car is in Altona North 3025.

I own a 2012 Hyundai i45. I am experiencing an issue where my car key does not rotate to the start position. It only turns to the ignition point and then stops, preventing the car from starting.

Car Keys lost. 2002 toyota corolla. Ignition and lock are seperate keys. Need both

2002 Toyota Corolla. Lost car keys. Lock and ignition are seperate keys. Need to make both

Internal Door 1 laundry knob and up to 5 internal room door handles /alignment repairs and sliding door lock latch/misalignment fix. Problems: hard to open or and close, jammed.

one of the buttons on my car keys doesn’t push in. It opens the boot and locks the car but doesn’t unlock the car at all.

Need a copy key for a Mercedes c 200

Toyota corolla 2004 key replacement

I need the door handle to be fixed (handle opens on one side but not the other , minor issue) and get a replacement key (I lost the original key).

-Need to install additional lock on the main door -Fix the exhaust in the bathroom (its working, just have to put the top part back) -Couple of nails to hang frames

The front screen door has an issue. If it's locked on the outside It can't unlock from the inside. The keys don't work properly .bought a new barrel need someone to replace it. Location- kurunjung

Need someone to replace the missing mechanism so door can be locked

Main front door lock is loose, need to be fixed / adjusted

Need to fix 2 main Door locks and 2 bathroom doors.

Locks on 4-year-old glass sliding doors to yard do not latch on due to maybe the movement of the land. There are two rooms so two sliding doors. Also the window upstairs do not open, not a lock/latching issue, but seems too tight or frame moved.

Need a locksmith to fix broken privacy lock on a toilet’s door (see photo attached).

Security door lock needs to be repaired or replaced. I can pay the extra amount for the lock if replaced

The door is not locking/closing. Need it to be fixed.

Need to fix outdoor lock lash , it’s tilted with push and nuts bolt our out too

Three internal room smart locks are not working. They are ON but they are not reading fingerprints or code and tenants are having to rely in keys. Needs to be fixed and explain to my tenants why it was not working so they don’t have the same issue again.

I have 2 privacy locks that need to be fixed.I have 1 lock with me.For the other door I need help in getting the right lock with me.

Take off the old one and replace with new lock for main entrance door

Need a handy man to replace door knob with lock (to be supplied by us) and repair the sliding door as it’s not closing/opening properly.

I’ve recently moved in and need the front door locks changed for security reasons. The existing door handle is also loose and needs to be fitted properly/tightened. Scope of work: * Change or rekey the front door locks. * Tighten and properly secure the existing handle. * Ensure the deadbolt, handle and latch all operate smoothly. * Check door alignment and locking operation after installation.

Install and supply two new deadbolt locking systems with an internal snibs. Must be black in colour. Front and back door of house as per photos shown. Repair broken window latch also. Repair kitchen window latch as well.

Gate lock does not a line anymore

I need a handyman or locksmith to replace an existing lever handle and deadbolt on a timber entrance door with a new Smart Keypad Lock (hardware provided). Scope of work includes: Removal: Remove the existing silver lever handle and the deadbolt above it. Installation: Install the new Smart Lock system (vertical keypad style). Strike Plate Fix: The current door bolt/latch is a bit "light" and doesn't align perfectly. You will likely need to reposition or slightly mortise the strike plate on the door frame so the new lock engages securely and smoothly. Testing: Ensure the door locks and unlocks without needing to pull or push the door forcefully. Materials: I have the new Smart Lock set and the manual (as shown in photos). You will need: Your own tools (drill, bits, wood chisel, and potentially longer security screws for the strike plate). Photos attached: Current door hardware (Red door). Existing strike plate and frame. New hardware in box.

Front door Lock is loose & doesn’t deadlock with the key.

Install philips smart lock

Hi We would like to install front door safety lock with Camera .

Philips smart lock installation

Hi i need the Aqara a100 smart lock installed. Supplied ready to go, Preferably someone who has worked with the model before. The door is also binding on the bottom if you could fix that as well. Thank you

Need someone to come and install smart lock. I will supply new Aqara A100. You bring your own tools and install/configure. Prior experience with this lock os ideal.

Installation of Eufy smart lock. The door doesn’t have any deadbolt provision

I have a screen door and main door, both of which need smart lock systems and recommendatons for the systems/company

Hi, looking for somebody who know how to properly install smart lock at our front door. Model code: Philips DDL709-FVP-7HWS

I will provide lock, need someone who knows how to install smart lock, must be done properly

take off not working smart lock and install new smart lock for main entry door

Need advice and installation of a smart lock that I will buy from Bunnings

Need a smart lock installed on my front door, I already have the lock.

I have a brand new front door that I need a smart door lock to be installed

Need to replace the existing smart lock with a new one preferrably a good brand within a reasonable cost. Installation required. Eufy C33 smart lock

Please quote for Smart Lock installation for four new entry doors. Open to get any suggestions we need a blocks with face recognition and a fingerprint access as well as application Thanks

I need someone to install eufy smart lock

Aqara smart lock to be installed in the front door.

I need to have supply and lock installed on 1 front door

Install front door lock. Lock jams and doesn’t go back in and hole in metal door frame needs to be hollowed

Installing an aqara u400 smart lock