Find and experienced emergency locksmith in NSW

It's a 2010 subaru liberty I've lost the key and my car broke down so I'm unable to fix this issue without a new key trying to gage some offers at a lower price

I need a duplicate key for my Toyota Yaris 2007 model. I already have one original key with me.

I have a working original car ignition key and a new key fob with a blank metal blade. I need the blank blade cut to match the original key. Metal cutting only No immobiliser / no programming required Blade profile matches the original Job can be done by an automotive locksmith or key cutter with car key machine I can come to you or you can come to me. Please confirm you have experience cutting car key blades (standard or laser, as applicable).

I have the key but the actual part for the ignition has fallen off so can’t start it 2017 ford ranger wildtrak

Simply change a lock barrel on a caravan door, Preferably ASAP

Toyota Techstream Can you clear a Toyota factory head unit security lock? Toyota FJ cruiser 2016

Hello I need you to buy and install a black deadbolt with a key from Bunnings The handle automatically locks so I need to have that fixed And this other handle has fallen off

Tried spare car key but it won't turn. Radio interior lights working. Have disconnected and reconnected the battery. There was a constant chime previously but no sound now

Keys left inside the car. Kia Cerato

Forgot car keys in the car. Need someone to open the car

Caravan lock appears jammed

Fix my 2016 C43 coupe door handle, inside the car the door handle is now loose and won’t open from inside. Send offers

I have a Holden Captiva. I locked the car keys inside the car.

I have Mitsubishi Colt 2005 years The key open doors, ignition on but doesn’t start the car. The diagnostic tool says incorrect immobilizer key. Needs to fix it

Need a room door lock opened. Don’t care if the lock breaks, i just want it opened. Looking for the cheapest offers

Hi, I’m looking for a qualified locksmith or auto key specialist to cut and program a spare car key for a Mitsubishi Outlander 2013. ✅ We already have one original key working perfectly ✅ Just need one additional spare key ✅ The spare key must fully work (start the car, immobiliser/chip programmed) ❌ No lost keys situation

I lost my 2013 camry hybrid car key. I need a new key to be made asap

Need car locksmith to open passenger rear left door and fix the lock for my genesis 2016.

We lost the only key we have for our Toyota Yaris 2006 - need replacement key We are Wollstonecraft/ Crown Nest 2065

the garage door belt is snapped off while opening, need someone to fix it. From the photo, it looks like the drive belt for your garage door opener has completely snapped off the trolley carriage. The garage door is a tilt door. The brand of the auto garage opener is Merlin.

Hi I need to replace/fix the door lock.

Hello! I have two doors that need the latches and potentially one handle fixed. One latch does not work at all (it is stuck), the other does, but doesn’t keep the door closed (it can be easily pushed open) and the handle is loose.

Sliding door won't latch, cluld be door missalignment

The lock doesn’t work. Need someone to fix this.

There are two sliding door locks got damaged. One broken and another stuck inside. Need help from someone to fix these two lock.

The knob isnt pulling the latch in properly making the handle unable to open.

Need to replace two of the glass door lock, top and bottom.

I need someone who can change the lock of my door and the door need be to be fixed as well and it’s kind of inside out

The front door mechanism just continues to rotate with a key inside. Instead of the key unlocking the door. I believe the mechanism may have broken and may need replacement. However, it could just need repair. Located in Paddington Sydney. Need this done Monday 19th as I can’t use the front door.

Door will shut and top latch will click in but the bottom lock will open and close with the key when the door is open but will not lock and turn when the door is closed. I believe the plate in the door frame needs to be adjusted / moved slightly for it to be able to go in and lock the door. We would rather repair this and not get a new handle.

I need someone to fix the latch on my bedroom door and also put a lock onto it. I also need another door latch fixed. Looks like it may need another screw for it.

Dining room security screen door (sliding) * Triple lock mechanism has stopped working with the key * The bottom locking tongue/bolt is stuck in the locked position and will not retract * Door cannot slide open, so there is no access to the backyard from this door Front door triple lock: * Does not unlock from the outside with the key * Works normally from the inside

I’ve got an aluminium sliding door with a Doric locking system that isn’t closing or latching properly. The lock turns, but the hook doesn’t seem to line up with the striker plate, so the door won’t lock securely. What I think might be needed (but open to advice): • Check alignment of the striker plate and lock • Adjust or re-seat the mechanism • Make sure the door is running square and closes smoothly • Replace parts if required (happy to cover parts separately) Photos attached for reference. Looking for someone who has experience with sliding door locks

The latch on one of our internal doors has jammed. When you pull the handle, the latch doesn’t retract at all. Im no expert but it looks like looks like the latch mechanism needs replacing. What I need: • Diagnose the issue • Replace the latch if required • Supply the correct latch • Make sure the handle works smoothly again and door closes properly Standard internal door, easy access, photos available. Location: Burraneer Timing: Flexible, but sooner is better. Please only respond if you’ve done this type of work before.

1. Fixing door lock system of one of the bedroom doors (pic attached) broken from one side 2. Bathroom sliding door needs a good lock from inside to lock ( current lock is not locking, can be opened from outside)

I need a handyman/locksmith to fix a door latch that isn’t opening from the inside. We can use the lock from outside using finger touch to open the door however from inside, we can't open the door. Issue: Door opens fine from the outside Smart lock is working (no issues) Mechanical lock/latch does not open from the inside Likely the latch is jammed due to dust/dirt buildup Lock model: Phillips Easy Key 7300 What’s needed: Remove the latch/lock mechanism as required Clean out dust and dirt inside Unjam and restore proper function from the inside Reinstall and test thoroughly Please bring your own tools and let me know your availability and any relevant experience.

the garage door belt is snapped off while opening, need someone to fix it. From the photo, it looks like the drive belt for your garage door opener has completely snapped off the trolley carriage. The garage door is a tilt door. The brand of the auto garage opener is Merlin.

We have an internal bathroom door handle that has broken and needs fixing. This was “fixed” before by another tasker but went straight back to being broken and I really want a working door handle

Hi, I need an experienced handyman/locksmith to fix an internal door handle that has stopped opening the door and to check the rest of my internal doors. Main issue: • One internal lever handle won’t open the door. • The handle moves up and down freely but the latch doesn’t retract. • This is not a simple “poking the pin through from the other side” privacy lock – the mechanism/handle alignment seems to be the problem. • Round rose/lever handle set (photo attached). Wider job: • This has been an issue with a number of doors in my home, so I’d like you to: • Check all internal door handles and latches are fitted and aligned correctly an additional 7 doors • Let me know if anything needs adjusting, repairing, or replacing and what parts/costs would be involved. Requirements: • Must have solid experience with door hardware/locks – not just general DIY. • Bring your own tools.

The glass sliding door, that leads out to the patio, has been getting stuck. It may need the rollers to be replaced