Find and experienced emergency locksmith in NSW

I need a replacement car key for my 2018 Mitsubishi asx.

Vintage 1971 Citroen Van front doors key. I have the old key but it’s broken and the replacement keys are not quite right so I need someone mobile to come and make a new key so the doors lock. All mechanical no electronics

Key in ford ranger 2021 snapped in half in ignition. Will start drive and turn so barrel can be removed if needed but want to get the half key take out ASAP to get recut. Anyone able to get key out without damage etc. Likely need ignition out to remove but as said still starts and runs. Photo attached. Please quote

Mazda3 key I have a key but it has snapped.

Hi , im looking for duplicate my van key ( Ford Transit 2017 ) .

Happy to drive and meet I have one key with me Nissan Qashakai 2019

I have a BMW e46 2004 with 2 keys, both the keys have stopped working and only unlock the boot with the key atm. I want to have the battery changed and reprogramed if necessary.

I have accidentally dropped my Toyota Camry key. We need a new one and programmed asap. Please if you could help

Cut and reprogram spare keys for Honda Jazz 2015 model with twist to start keys. There is an existing car key, looking to make a spare set, with remote

Nissan pulsar 2015 igniton w / key or ignition ley hub

Locked out of my car, need opened

It's a 2010 subaru liberty I've lost the key and my car broke down so I'm unable to fix this issue without a new key trying to gage some offers at a lower price

I need a duplicate key for my Toyota Yaris 2007 model. I already have one original key with me.

I have a working original car ignition key and a new key fob with a blank metal blade. I need the blank blade cut to match the original key. Metal cutting only No immobiliser / no programming required Blade profile matches the original Job can be done by an automotive locksmith or key cutter with car key machine I can come to you or you can come to me. Please confirm you have experience cutting car key blades (standard or laser, as applicable).

I have the key but the actual part for the ignition has fallen off so can’t start it 2017 ford ranger wildtrak

Simply change a lock barrel on a caravan door, Preferably ASAP

Toyota Techstream Can you clear a Toyota factory head unit security lock? Toyota FJ cruiser 2016

Need car locksmith to open passenger rear left door and fix the lock for my genesis 2016.

We lost the only key we have for our Toyota Yaris 2006 - need replacement key We are Wollstonecraft/ Crown Nest 2065

the garage door belt is snapped off while opening, need someone to fix it. From the photo, it looks like the drive belt for your garage door opener has completely snapped off the trolley carriage. The garage door is a tilt door. The brand of the auto garage opener is Merlin.

I have a Philips smart lock. Need the lock installed at my house. Philips smart lock - Philips easykey 5000 series DDL505-5HBS.

Looking for someone who can help fix this lock. The door won’t close properly anymore as the lock has become loose.

Screen door doesn’t lock due to lock on door frame loose and has a crack on door frame (Need a quote)

the front door lock is jamming. the door is unlocked, but the key would not turn again to allow the key to be removed from the lock. We need someone to inspect the lock, identify the cause of the jamming, and repair or replace the lock if required so it operates smoothly and safely.

Repair Summary: The door lock mechanism is not functioning correctly. The door is fitted with a Roto multipoint locking system, and the full multipoint mechanism is currently not engaging as intended. This requires inspection and repair by a technician with specific experience in Roto multipoint door locks to ensure proper alignment, operation, and security.

Church kitchen door lock to be fixed. Cannot be opened with key from the outside, likely cylinder has slipped in the lock. Door can be opened when inside without key.

Door type (front door in apartment Lock type surface mouted What happened: lock was forced/bashed in due to medical episode Damage visible images attached Whether you need: Lock replacement only Door/frame repair

The internal door lock is loose and not functioning properly. It may just need refitting, but if it’s broken, it might require replacement. Looking for someone experienced with basic door hardware repairs. Quick and simple job — should take less than 30 minutes. Tools preferred. Flexible with timing.

My door lock and handle have come loose and are pulling away from the door (see photo). I also need the lock cylinder replaced. Scope of work: Inspect the existing door lock and handle Properly refit and secure the loose lock Replace the lock cylinder (new keys required) Ensure the door locks and unlocks smoothly Notes: Existing door and handle to remain if possible Please advise whether repair + cylinder replacement is sufficient, or if a full lock replacement is required Quote to include labour + lock cylinder (total price) Experience with door locks required.

Hello! I have two doors that need the latches and potentially one handle fixed. One latch does not work at all (it is stuck), the other does, but doesn’t keep the door closed (it can be easily pushed open) and the handle is loose.

The front door mechanism just continues to rotate with a key inside. Instead of the key unlocking the door. I believe the mechanism may have broken and may need replacement. However, it could just need repair. Located in Paddington Sydney. Need this done Monday 19th as I can’t use the front door.

Door will shut and top latch will click in but the bottom lock will open and close with the key when the door is open but will not lock and turn when the door is closed. I believe the plate in the door frame needs to be adjusted / moved slightly for it to be able to go in and lock the door. We would rather repair this and not get a new handle.

Need help fixing my garage door lock (hubby tried installed but worn a screw, and the door appears too thin for the lock and is quite loose) and side gate that is stuck, and is at a very windy location that the lock piece at blent, will probably need a new system - please give me quote for the lock if necessary or you can let me know which one to buy from Bunnings - considering the $45 latch from Bunnings I can supply). Location Rouse Hill.

I need someone to fix the latch on my bedroom door and also put a lock onto it. I also need another door latch fixed. Looks like it may need another screw for it.

Dining room security screen door (sliding) * Triple lock mechanism has stopped working with the key * The bottom locking tongue/bolt is stuck in the locked position and will not retract * Door cannot slide open, so there is no access to the backyard from this door Front door triple lock: * Does not unlock from the outside with the key * Works normally from the inside

I’ve got an aluminium sliding door with a Doric locking system that isn’t closing or latching properly. The lock turns, but the hook doesn’t seem to line up with the striker plate, so the door won’t lock securely. What I think might be needed (but open to advice): • Check alignment of the striker plate and lock • Adjust or re-seat the mechanism • Make sure the door is running square and closes smoothly • Replace parts if required (happy to cover parts separately) Photos attached for reference. Looking for someone who has experience with sliding door locks

The latch on one of our internal doors has jammed. When you pull the handle, the latch doesn’t retract at all. Im no expert but it looks like looks like the latch mechanism needs replacing. What I need: • Diagnose the issue • Replace the latch if required • Supply the correct latch • Make sure the handle works smoothly again and door closes properly Standard internal door, easy access, photos available. Location: Burraneer Timing: Flexible, but sooner is better. Please only respond if you’ve done this type of work before.

1. Fixing door lock system of one of the bedroom doors (pic attached) broken from one side 2. Bathroom sliding door needs a good lock from inside to lock ( current lock is not locking, can be opened from outside)

I need a handyman/locksmith to fix a door latch that isn’t opening from the inside. We can use the lock from outside using finger touch to open the door however from inside, we can't open the door. Issue: Door opens fine from the outside Smart lock is working (no issues) Mechanical lock/latch does not open from the inside Likely the latch is jammed due to dust/dirt buildup Lock model: Phillips Easy Key 7300 What’s needed: Remove the latch/lock mechanism as required Clean out dust and dirt inside Unjam and restore proper function from the inside Reinstall and test thoroughly Please bring your own tools and let me know your availability and any relevant experience.

the garage door belt is snapped off while opening, need someone to fix it. From the photo, it looks like the drive belt for your garage door opener has completely snapped off the trolley carriage. The garage door is a tilt door. The brand of the auto garage opener is Merlin.