Home/
Jobs/
Carpentry/
Sydney Northern Beaches

Carpentry Jobs in Sydney Northern Beaches

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Sydney Northern Beaches

Check out what tasks people want done near you right now...

We have 2 tables and 2 wall hung vanity cupboards we would like remade into wood or wood veneer. The tables will have a stone top (25mm overhang at the front and 6mm overhang either side) there are counter top basins and taps are in the walls. The wall hung vanities sit approximately 150mm below the table. The table legs are slightly concave at the top and taper to the floor. Dimensions Tables 1 x L1800 x w 550 x h 780 - 2 basins 1 x L 1400 x w 500 x h 780 - 1 basin Vanity cupboards 1 x L1400 x w 420 x h 300 - 2 electrical connections either end 1 x L110 x w 420 x 300 1 electrical connection on left hand side We would like quotes. We have originals for inspection if needed.

Thu Oct 08 2026

about 17 hours ago

Open

Please - the space above the washer & dryer measures 78 cm x 157cm pick up the wood or veneer, or laminate to fit, and install bench top above the washer & dryer.

St Ives NSW 2075, Australia

Thu Oct 08 2026

about 19 hours ago

Open

Create 3 wooden box as a cover for sunscreen lotion bottle. Please see photos for measurement and idea. Wood and supplies to be supplied by tasker.

Thu Oct 08 2026

about 19 hours ago

Open

Looking for a handyman or cabinet maker to supply and fit a white melamine desk extension to my IKEA MALM 6-drawer dresser (160 x 78 x 48 cm). Please supply and cut: * Desktop: white melamine, 1400 x 480 mm, 25mm thick (18mm minimum), edge banded on all 4 edges * Leg panel: white melamine, 780 high x 480 deep, same thickness, edge banded front, back and top * 4 x L-brackets, screws and felt pads Install: * Desktop rests on the dresser with 400 mm overlap, remaining 1000 mm supported by the leg panel * 2 brackets joining the leg panel to the desktop, 2 securing the desktop to the dresser top * Desk must sit level Happy to send photos of the dresser and space. Please quote a fixed price including materials

Lindfield NSW 2070, Australia

Thu Oct 08 2026

about 22 hours ago

Open

one kitchen cabinet doors is damaged and I need to have a replacement made. It is 730 mm × 600 mm x18mm. It is a flat slab-style door panel with a spray-painted finish， no glass colour is Green spruce ，Dulux . Actually, the job isn’t difficult. just need to cut a 700 mm × 600 mm piece of MDF, then take it to a spray shop to have it 2-pack painted. If you regularly make cabinet doors, this should be a very straightforward job for you.

Brighton VIC 3186, Australia

Mon Oct 05 2026

4 days ago

Open

Building of uni piers, timber framing and scyon flooring base for tiled deck around our pool, per DA approved plans (see attached images). We will organise other trades (tiling, pool fencing, plumbing etc) so principally looking for a carpenter/builder to get the basic structure up.

Sydney NSW 2093, Australia

Mon Oct 05 2026

4 days ago

Open

Hi, I need an experienced cabinet maker or joiner with a professional workshop setup to fabricate 5 cabinet doors and 1 side panel. This job must be completed off-site at your workshop and delivered back finished. The Design Setup (High Attention to Detail Needed): • Face & Reverse: The front laminate sheet and the back laminate sheet are different colours. • Edges: Each of the four edges on the doors/panel will feature a different colour ABS edging (e.g., matching the face, reverse, or specific accent borders). Precise attention to detail is required to ensure the correct edging goes on the correct side. What needs to be done: 1. Supply Substrate: You must supply the 16mm Moisture Resistant (MR) MDF core sheets. 2. Pick Up Materials: Collect the raw materials from my location in Seaford Vic 3. Laminate Pressing: Glue and press the laminates flat onto both sides of the 16mm MR MDF core using proper workshop pressing equipment (no air bubbles or telegraphing). 4. Precision Cutting: Cut the sheets cleanly down to the final sizes without chipping the laminate. 5. Multi-Colour Edge Banding: Apply the specific ABS edging variations to each designated border and trim flush. 6. Delivery: Drop off the 6 completed, finished pieces to my address. Approximate dimensions of finished pieces: • 5 x Doors: Roughly 60cm x 80cm each • 1 x Side Panel: Roughly 60cm x 80cm What I will provide: • 2 x Large sheets of laminate (1.8m x 3.6m each — two different colours) • All required rolls of ABS edging (in the different colours needed) What you must have/supply: • Supply of the required 16mm MR MDF sheets. • Commercial workshop setup (cold/hot press, precision panel saw, and edge-bander/trimmer). • Transport to pick up the 1.8m x 3.6m sheets and deliver the finished doors safely. Please outline your experience with custom laminate work and your estimated turnaround time in your offer. Thank you!

Sun Oct 04 2026

4 days ago

Open

I need a custom replacement bed leg made to match my existing teak bed frame. • Shape: Simple rectangular prism (rectangle block). • Timber: Tasker to source the timber. Looking for Teak, New Guinea Rosewood, or a similar heavy hardwood that can be oiled/stained to match a weathered/tarnished teak colour. • Dimensions: 210 mm H x 85 mm W x 85mm D. • Fixing: It needs to attach via an M8 thread protruding from the top. Please see the attached photo of my existing bed leg for the exact colour/tarnish and fixing type. Let me know what timber you plan to use in your offer. Pickup or drop-off can be arranged, or on-site install if you are local to Balgowlah.

Sun Oct 04 2026

5 days ago

Open

Looking for an experienced carpenter / cabinet joiner for a beauty kiosk installation in Balgowlah, Sydney. 📍 Location: Balgowlah, NSW 📅 Date: 13 October 2026 🛠 Work: Beauty kiosk carpentry, joinery, cabinet installation and fit-out Must have relevant shopfitting/joinery experience, own tools and be reliable.

Balgowlah NSW 2093, Australia

Wed Sep 30 2026

9 days ago

Open

Browse all tasks

Last updated on 8th Oct 2026

Discover your earning potential in Sydney Northern Beaches

Earn money with every carpentry task

$698

per week

1-2 tasks per week

$1,745

per week

3-5 tasks per week

$2,443+

per week

5+ tasks per week

$3,022

per month

1-2 tasks per week

$7,556

per month

3-5 tasks per week

$10,578+

per month

5+ tasks per week

$36,296

per year

1-2 tasks per week

$90,740

per year

3-5 tasks per week

$127,036+

per year

5+ tasks per week

*Based on average carpentry task prices in Sydney Northern Beaches. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Sydney Northern Beaches

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$698	$1,745	$2,443
Staining	$870	$2,175	$3,045
Joiner	$480	$1,200	$1,680
Cabinet Making	$140	$350	$490

*Based on average carpentry task prices in Sydney Northern Beaches. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Sydney Northern Beaches

meet
Ryan H
10 years on Airtasker
- St James NSW
4.8
Overall rating
124 reviews
99.36%
Completion rate
The percentage of tasks successfully completed by the Tasker
157 tasks
meet
Christos V
6 years on Airtasker
- Blakehurst NSW
4.9
Overall rating
59 reviews
96.67%
Completion rate
The percentage of tasks successfully completed by the Tasker
60 tasks
meet
Ken D
4 years on Airtasker
- Ermington NSW
4.9
Overall rating
75 reviews
97.75%
Completion rate
The percentage of tasks successfully completed by the Tasker
89 tasks
meet
Carlos R
4 years on Airtasker
- Kellyville NSW
5
Overall rating
56 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
67 tasks
meet
Timothy H
2 years on Airtasker
- Sydney City CBD NSW
4.8
Overall rating
661 reviews
99.78%
Completion rate
The percentage of tasks successfully completed by the Tasker
920 tasks
meet
Ian K
2 years on Airtasker
- Sydney City CBD NSW
4.9
Overall rating
260 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
344 tasks
meet
Mohanad A
11 months on Airtasker
- Bankstown NSW
5
Overall rating
25 reviews
97.06%
Completion rate
The percentage of tasks successfully completed by the Tasker
34 tasks
meet
Liam L
2 months on Airtasker
- Northbridge NSW
5
Overall rating
12 reviews
92.86%
Completion rate
The percentage of tasks successfully completed by the Tasker
14 tasks