Carpentry Jobs in Ryde

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Ryde

Check out what tasks people want done near you right now...

Carpenter/Joiner Needed – Timber Tabletop with 5 Bowl Cut-Outs I need a timber tabletop made for our slime business display/testing station. The tabletop needs to be approximately 1900mm long × 600mm wide. I need 5 clean, evenly spaced circular holes cut into the tabletop to hold plastic slime bowls. Important: I don’t want the bowls sitting flush with the timber. I want each bowl to drop approximately halfway through the tabletop, so roughly half of the bowl is visible above the timber and the other half sits underneath. This is so kids standing around the table can easily see the slime inside the bowls. I can provide the exact diameter/measurements of the bowls before the job is started. I can also supply one of the actual bowls if needed to make sure the cut-outs are the correct size and the bowls sit at the right height. I’m happy to supply the timber myself, or if you can supply a suitable timber panel, I’m happy to pay the additional cost for the timber. For the timber, we’re looking for pine or a similar light-coloured, nice-looking timber that isn’t overly expensive. We want to keep the natural light timber look and grain visible once it has been clear coated. Open to suggestions I’d like all 5 cut outs and the outside edges to be nicely finished with no sharp or rough edges. The timber needs to have a nice smooth/sanded finish. If the timber is purchased already sanded and smooth, that is completely fine. I’d also like the entire tabletop sealed with a durable clear protective coating, including the inside edges of all 5 cut-outs, so it is protected from slime/moisture, easy to wipe clean, and still keeps the natural light timber appearance. I’m just looking for a clean, neat and professional finished product.

Fri Sep 11 2026

about 8 hours ago

Open

I want to replace my divider wall wooden tops with pine tops. Just need someone to cut the wood, I can fit myself. I am happy to deliver the wood and templates to you if needed and pick up when completed. Need someone to cut a provided length of pine into 3 pieces and bullnose/round the edges. Old divider wall tops will be supplied to use as templates for measurements. See pics for more details. Location is Waikiki but happy to drop off/pick up.

Waikiki WA 6169, Australia

Fri Sep 11 2026

about 9 hours ago

Open

We are seeking experienced and reliable installers to install wall paneling and assemble furniture in several rooms of a private house. The project is expected to take approximately two months to complete. Ideal candidates should have previous experience with wall panel installation, furniture assembly, and general finishing work. Applicants must have their own professional tools and be able to work independently while maintaining a high standard of craftsmanship. We will supply all necessary glue, hardware, and installation materials. We are looking for individuals who are dependable, detail-oriented, organised, and committed to keeping the work area clean and safe throughout the project. Interested candidates should send us a copy of their CV, including details of relevant experience and previous projects.

Thu Sep 10 2026

about 22 hours ago

Open

attached photo). Approx. 1m wide. I would like the new cabinet to match the existing kitchen cabinetry as closely as possible. Please include site measurement, supply, manufacture and installation in your offer

Sydney NSW 2121, Australia

Thu Sep 10 2026

about 23 hours ago

Open

I’m looking for someone to make three rectangular display plinths similar to the reference image. They should be made from pine plywood, with the natural grain and layered edges visible, and finished with a clear matte protective coating. The plinths can be hollow but must be sturdy, well-finished and suitable for displaying jewellery and decorative objects. I will provide the exact dimensions for all three plinths. Please include examples of similar cabinetry or furniture work with your offer. I’m happy to discuss material recommendations and arrange delivery or collection. Location: Melbourne I can pick this up.

Thu Sep 10 2026

1 day ago

Open

Looking for an experienced cabinetmaker/joiner to build two modular pieces for our coffee exhibition stand: 1. Mobile Coffee Bar * 2300mm L × 800mm D × 900mm H * Rounded ends, timber/slatted front, black top * Heavy-duty lockable wheels * Strong enough for commercial coffee machine + grinders * Designed to flat-pack/dismantle for transport and repeated use 2. Silo / Retail Cabinet * 1800mm W × 600mm D × approx. 2000–2200mm H * Three coffee silos centrally with retail shelving on both sides * Storage cupboards underneath * Built in two modular pieces (upper + lower) for easy transport Prefer quality lightweight construction such as 18mm plywood, but happy for the cabinetmaker to recommend materials and construction method. Concept drawings supplied. No signage/branding required. Sydney — ideally completed by 30 September 2026. Please include price including materials, workshop location, completion timeframe and examples of previous work

Silverwater NSW 2128, Australia

Thu Sep 10 2026

2 days ago

Open

Title: Sand, stain and varnish staircase + two doors Looking for an experienced timber finisher to restore: * Staircase timberwork * Front door * Bathroom door Work includes touching up damaged timber, light sanding, colour-matching/staining and applying a protective varnish. The staircase should match the new timber column and look consistent throughout. I have already tested a Bunnings stain colour and varnish that worked well and can show the sample. This is a refresh, not a full strip-back. Stair treads/flooring are not included. Please include materials and share photos of similar timber-restoration work. Ready to proceed with the right person.

Pymble NSW 2073, Australia

Wed Sep 09 2026

2 days ago

Open

Looking for an experienced handyman/carpenter to complete minor finishing works on two saunas in Lindfield and Denistone. Tasks include: Fit sauna door handles Apply one coat of timber/sauna oil Install pre-cut cedar backrest pieces Fit sauna vents Level/remake two small timber step benches Round over timber bench edges Stack sauna heater stones Most materials are already supplied and prepared. You will need your own basic carpentry tools, including a pin gun/router if possible. This is mainly finishing work — looking for someone reliable who can complete both saunas neatly and efficiently.

Lindfield NSW 2070, Australia

Wed Sep 09 2026

3 days ago

Open

Need make and cut 9 pieces of cabinets doors in different sizes, 7 boards in wood color, 2 boards in white color, I have size details n color guid

Tue Sep 08 2026

3 days ago

Open

Browse all tasks

Last updated on 11th Sep 2026

Discover your earning potential in Ryde

Earn money with every carpentry task

$600

per week

1-2 tasks per week

$1,500

per week

3-5 tasks per week

$2,100+

per week

5+ tasks per week

$2,598

per month

1-2 tasks per week

$6,495

per month

3-5 tasks per week

$9,093+

per month

5+ tasks per week

$31,200

per year

1-2 tasks per week

$78,000

per year

3-5 tasks per week

$109,200+

per year

5+ tasks per week

*Based on average carpentry task prices in Ryde. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Ryde

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$600	$1,500	$2,100
Staining	$1,000	$2,500	$3,500
Cabinet Installation	$480	$1,200	$1,680
Kitchen Cabinet Maker	$500	$1,250	$1,750
Joiner	$900	$2,250	$3,150

*Based on average carpentry task prices in Ryde. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Ryde

meet
Enrico D
1 year on Airtasker
- Kingswood NSW
4.9
Overall rating
12 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
14 tasks
meet
Hugo H
2 years on Airtasker
- Leichhardt NSW
5
Overall rating
5 reviews
92.86%
Completion rate
The percentage of tasks successfully completed by the Tasker
14 tasks
meet
Wai P
3 years on Airtasker
- St James NSW
5
Overall rating
537 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
632 tasks
meet
Mohanad A
10 months on Airtasker
- Bankstown NSW
5
Overall rating
21 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
27 tasks
meet
Haroon I
1 year on Airtasker
- Blacktown NSW
5
Overall rating
29 reviews
97.3%
Completion rate
The percentage of tasks successfully completed by the Tasker
37 tasks
meet
Hady M
10 years on Airtasker
- St James NSW
5
Overall rating
251 reviews
98.6%
Completion rate
The percentage of tasks successfully completed by the Tasker
285 tasks
meet
Feras Z
2 years on Airtasker
- Bankstown NSW
4.9
Overall rating
279 reviews
99.73%
Completion rate
The percentage of tasks successfully completed by the Tasker
374 tasks
meet
Syed R
2 years on Airtasker
- Dundas Valley NSW
4.9
Overall rating
157 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
197 tasks