Carpentry Jobs in Perth

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Perth

Check out what tasks people want done near you right now...

We have a set of modular office partition panels currently dismantled and stored, as shown in Photos 1 and 2. We need an office partition installer or commercial furniture assembler to assemble and configure these panels into individual computer testing cubicles similar to the example shown in Photo 3. The work is at our training facility in Perth CBD. Please review the attached photographs and advise whether you have experience installing this type of modular office partition system, your availability and your estimated price.

Perth WA 6000, Australia

Fri Jul 10 2026

about 17 hours ago

Open

Looking for an experienced benchtop installer/cabinet maker to measure, cut and install a new kitchen benchtop and splashback in my apartment in Victoria Park. The existing kitchen layout and cabinetry will remain the same. The benchtop will need to be professionally measured and cut to suit the sink and cooktop, then installed. The splashback will also need to be measured, cut and installed. We are happy to purchase and supply the benchtop and splashback materials ourselves, or alternatively, if you are able to supply suitable materials at a reasonable price, we are happy to consider supply and installation as part of your quote. Photos, kitchen measurements and plans are available. Please advise what materials you are experienced working with and provide an estimated quote for the job.

Victoria Park WA 6100, Australia

Thu Jul 09 2026

1 day ago

Open

I’m looking for a carpenter or cabinet maker to build and install custom sliding pine doors for an angled loft / roof storage space. The opening is approximately 800mm high x 2300mm wide. The finished result should look similar to the reference photos attached, with clean timber / pine sliding panels across the front of the storage area. The job includes: • Measure and confirm the opening on site • Build a simple framed opening for the storage space • Build and fit sliding pine / plywood doors • Install a floor rail / sliding track system • Add a suitable top guide or support if needed • Build side return walls / end panels where required • Make sure the doors slide smoothly and are easy to remove or access • Finish neatly so it suits the existing pine-lined ceiling and loft area The space is under an angled ceiling, so the job will need someone comfortable with custom carpentry rather than standard flat-pack cabinetry. I’m after a practical, neat storage solution, not a high-end wardrobe finish. Happy for the doors to be made from pine ply or similar material, provided the final look is clean and simple. Photos attached show the actual space and examples of the finished result I’m aiming for. Price is for labour. I will pay for the materials you need to collect from Bunnings etc and give me receipt. Please include materials, labour and track hardware price roughly in message.

Mt Lawley WA 6050, Australia

Thu Jul 09 2026

1 day ago

Open

I need a little wooden shelf that's 56 cm X 8 cm

Thu Jul 09 2026

2 days ago

Open

Spotted Gum Timber Kitchen Handles I'm looking for an experienced woodworker to manufacture a set of spotted gum rebated timber pulls with a concealed finger grip for my kitchen renovation. I need 11 190 mm long handles, 10 250 mm long handles and 3 350 mm handles. I already have spotted gum offcuts available. Handle Profile I'm after a modern rebated timber pull with a concealed finger grip, similar to the profile shown below. End Profile Front ┌──────────────────────┐ │ │ │ │ │ │ └─────────┐ │ │ │ └────────────┘ Concealed finger grip Approximate finished dimensions • Thickness: 20 mm • Height: 32–35 mm • Finger rebate: 12–15 mm deep • Comfortable grip • Internal corner eased or lightly rounded • All external edges lightly eased I'm happy to discuss minor adjustments if you think another profile or measurements would work better. ________________________________________ Handle Schedule 190 mm Quantity: 11 For: • 150 mm wall cabinet • 200 mm cupboard • 400 mm cupboard • 4 × 300 mm wall cabinet doors • 2 × 400 mm base cupboard doors ________________________________________ 250 mm Quantity: 10 For: • 4 × 600 mm drawers • 3 × 600 mm drawers • Pull-out rubbish bin • 2 × 500 mm cupboard doors ________________________________________ 350 mm Quantity: 3 For: • 3 × 900 mm drawers ________________________________________ 1800mm Quantity: 2 For: • 2 full-height pantry doors (approximately 300 mm wide each) The grain should run the full length of every handle. Finish Please supply: • Sanded to approximately 180–240 grit • Ready for Osmo Hardwax Oil • No coating required I'm happy to discuss your preferred fixing method, but likely I will require holes drilled in timber ready for fixing

Wed Jul 08 2026

3 days ago

Open

Timber slats approx 50mm with an opening of 70mm in custom frame We can purchase the treated pine for the uprights and the frame and pay just for the labour

Cottesloe WA 6011, Australia

Sun Jul 05 2026

6 days ago

Open

Needed, Sunshine Coast, Qld. Professional job of making a medium sized wood, corner TV cabinet with secret hidden compartment using RFID card locking mechanism. [Cabinet Dimensions]. Height=1.5 MTRS. Width=45 CMS. Length=1.5 MTRS. Secret compartment needs to be at highest point at back or top of Cabinet. [Compartment Dimensions]. Height=6.5-7.5 CM. Width=17.5 CM. Length=25 CM. No half jobs. Seamless traditional craftsmanship by carpenter/cabinet maker needed. No room for error. (RFID card locking mechanism. and will need a tasker who's willing and able to drop finished task/ TV cabinet to an agreed location suitable for both parties. Example,(Half way between both our advertised locations). Within reason of course... Price is negotiable.

Landsborough QLD 4550, Australia

Sat Jul 04 2026

7 days ago

Open

I require a piece of MDF panel to be purchased, cut to 40 centimeters square and a 30 centimeter square section to be hollowed on one side .5 centimeters deep. I also require the wood to be delivered to me in central Perth.

Subiaco WA 6008, Australia

Sat Jul 04 2026

7 days ago

Open

Wood veneer cupboards and drawers under sink in kitchen are damaged . the strips on top of cupboards and drawers need replacing and edges sanded and oiled

Perth, Western Australia

Fri Jul 03 2026

7 days ago

Open

Browse all tasks

Last updated on 11th Jul 2026

Discover your earning potential in Perth

Earn money with every carpentry task

$570

per week

1-2 tasks per week

$1,425

per week

3-5 tasks per week

$1,995+

per week

5+ tasks per week

$2,468

per month

1-2 tasks per week

$6,170

per month

3-5 tasks per week

$8,638+

per month

5+ tasks per week

$29,640

per year

1-2 tasks per week

$74,100

per year

3-5 tasks per week

$103,740+

per year

5+ tasks per week

*Based on average carpentry task prices in Perth. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Perth

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$570	$1,425	$1,995
Staining	$524	$1,310	$1,834
Kitchen Cabinet Maker	$684	$1,710	$2,394
Cabinet Installation	$328	$820	$1,148

*Based on average carpentry task prices in Perth. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Perth

meet
Barry H
9 years on Airtasker
- Balcatta WA
4.9
Overall rating
7 reviews
87.5%
Completion rate
The percentage of tasks successfully completed by the Tasker
8 tasks
meet
Darren P
8 years on Airtasker
- Mount Lawley WA
5
Overall rating
506 reviews
99.66%
Completion rate
The percentage of tasks successfully completed by the Tasker
591 tasks
meet
Michael F
8 years on Airtasker
- Morley WA
5
Overall rating
1477 reviews
99.94%
Completion rate
The percentage of tasks successfully completed by the Tasker
1668 tasks
meet
Daniel D
7 years on Airtasker
- Dianella WA
4.9
Overall rating
269 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
317 tasks
meet
Fin V
5 years on Airtasker
- Midland WA
5
Overall rating
16 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
19 tasks
meet
Troy W
4 years on Airtasker
- Joondalup WA
4.9
Overall rating
35 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
38 tasks
meet
David C
3 years on Airtasker
- Northbridge WA
4.6
Overall rating
17 reviews
95.45%
Completion rate
The percentage of tasks successfully completed by the Tasker
22 tasks
meet
Dylan S
2 years on Airtasker
- Maida Vale WA
4.8
Overall rating
30 reviews
96.97%
Completion rate
The percentage of tasks successfully completed by the Tasker
33 tasks