Cabinet Making Jobs in Perth

Browse through over 500 Cabinet Making Jobs.

See what you could earn

$0

per month

Based on average cabinet making task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Cabinet Making tasks in Perth

Check out what tasks people want done near you right now...

I’m looking for someone experienced in cabinet and kitchen repairs to fix a damaged drawer front. The white surface coating (possibly thermofoil or vinyl laminate) has lifted and peeled away along a section of the drawer, exposing the brown material underneath. I’d like someone to assess whether the existing coating can be securely reattached and repaired neatly so that it looks as good as possible. If it can’t be repaired satisfactorily, I’d appreciate advice on the best alternative, such as replacing the drawer front. Please bring the appropriate tools and adhesives and let me know your experience with this type of repair. Photo attached.

Crawley WA 6009, Australia

Sat Oct 10 2026

about 7 hours ago

Open

Custom walnut-finish drinks cabinet Looking for someone to build a drinks cabinet similar to the attached image. Size: 1,000 W × 450 D × 900 H mm, including legs. Dark walnut finish, fluted doors, brass-tone handles, and an open centre with a hanging wine-glass rack and bottle storage. Quality engineered board is fine; solid timber isn’t required. Shipping to Pakenham, VIC. Please quote materials and labour, estimated timeframe, and any delivery costs. Potential for repeat orders if the quality and pricing work wel

Fri Oct 09 2026

about 10 hours ago

Open

We have 2 tables and 2 wall hung vanity cupboards we would like remade into wood or wood veneer. The tables will have a stone top (25mm overhang at the front and 6mm overhang either side stone snd basin already purchased). The wall hung vanities sit approximately 150mm below the table. The table legs are slightly concave at the top and taper to the floor. Dimensions Tables 1 x L1800 x w 550 x h 780 - 2 holes needed 1 x L 1400 x w 500 x h 780 - 1 hole needed Vanity cupboards 1 x L1400 x w 420 x h 300 - 2 electrical connections either end and holes for plumbing 1 x L110 x w 420 x 300 1 electrical connection on left hand side and hole for plumbing. We would like quotes. We have originals for inspection if needed. Questions welcome. Dimensions available.

Fri Oct 09 2026

about 23 hours ago

Open

one kitchen cabinet doors is damaged and I need to have a replacement made. It is 730 mm × 600 mm x18mm. It is a flat slab-style door panel with a spray-painted finish， no glass colour is Green spruce ，Dulux . Actually, the job isn’t difficult. just need to cut a 700 mm × 600 mm piece of MDF, then take it to a spray shop to have it 2-pack painted. If you regularly make cabinet doors, this should be a very straightforward job for you.

Brighton VIC 3186, Australia

Fri Oct 09 2026

1 day ago

Open

We're a cabinetry installation business based on the Gold Coast. We're looking to connect with experienced cabinetmakers and cabinetry installers interested in regular ongoing subcontract work. We have a variety of projects including kitchens, laundries, wardrobes, vanities and custom cabinetry installations. **This $10 task is for a brief introductory phone discussion** to chat about your experience, availability, rates and potential opportunities to work together. We're hoping to build relationships with reliable, experienced installers who take pride in their workmanship. If you're interested, please make an offer and briefly let us know about your installation experience. Looking forward to chatting!

Fri Oct 09 2026

1 day ago

Open

Build a small bathroom cabinet and move a few items attached to the wall (Paper towel dispenser etc) in a gym bathroom. - Build cabinet under sink - Hang Mirror - Move paper towel dispenser

Perth WA 6000, Australia

Wed Oct 07 2026

3 days ago

Open

Wanting custom cabinet panels fitted under our stairs. Need the tallest panel to function as a door so we can access the storage cavity.

Swanbourne WA 6010, Australia

Mon Oct 05 2026

5 days ago

Open

Hi, I need an experienced cabinet maker or joiner with a professional workshop setup to fabricate 5 cabinet doors and 1 side panel. This job must be completed off-site at your workshop and delivered back finished. The Design Setup (High Attention to Detail Needed): • Face & Reverse: The front laminate sheet and the back laminate sheet are different colours. • Edges: Each of the four edges on the doors/panel will feature a different colour ABS edging (e.g., matching the face, reverse, or specific accent borders). Precise attention to detail is required to ensure the correct edging goes on the correct side. What needs to be done: 1. Supply Substrate: You must supply the 16mm Moisture Resistant (MR) MDF core sheets. 2. Pick Up Materials: Collect the raw materials from my location in Seaford Vic 3. Laminate Pressing: Glue and press the laminates flat onto both sides of the 16mm MR MDF core using proper workshop pressing equipment (no air bubbles or telegraphing). 4. Precision Cutting: Cut the sheets cleanly down to the final sizes without chipping the laminate. 5. Multi-Colour Edge Banding: Apply the specific ABS edging variations to each designated border and trim flush. 6. Delivery: Drop off the 6 completed, finished pieces to my address. Approximate dimensions of finished pieces: • 5 x Doors: Roughly 60cm x 80cm each • 1 x Side Panel: Roughly 60cm x 80cm What I will provide: • 2 x Large sheets of laminate (1.8m x 3.6m each — two different colours) • All required rolls of ABS edging (in the different colours needed) What you must have/supply: • Supply of the required 16mm MR MDF sheets. • Commercial workshop setup (cold/hot press, precision panel saw, and edge-bander/trimmer). • Transport to pick up the 1.8m x 3.6m sheets and deliver the finished doors safely. Please outline your experience with custom laminate work and your estimated turnaround time in your offer. Thank you!

Sun Oct 04 2026

6 days ago

Open

To assebly furniture from IKEA

Perth WA 6000, Australia

Sun Oct 04 2026

6 days ago

Open

Browse all tasks

Last updated on 10th Oct 2026

Unlock new income opportunities in Perth

Explore cabinet making related jobs and discover your financial opportunities

Type of cabinet making job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$550	$1,375	$1,925
Kitchen Cabinet Maker	$600	$1,500	$2,100
Staining	$500	$1,250	$1,750
Cabinet Installation	$344	$860	$1,204

*Based on average cabinet making task prices in Perth. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Cabinet Making Taskers in Perth

meet
David C
4 years on Airtasker
- Northbridge WA
4.4
Overall rating
22 reviews
90.48%
Completion rate
The percentage of tasks successfully completed by the Tasker
21 tasks
meet
Alexander D
2 years on Airtasker
- Yanchep WA
4.9
Overall rating
356 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
387 tasks
meet
Luke N
8 years on Airtasker
- Perth Central WA
5
Overall rating
922 reviews
99.91%
Completion rate
The percentage of tasks successfully completed by the Tasker
1142 tasks
meet
Joshua M
2 years on Airtasker
- Bassendean WA
5
Overall rating
10 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
10 tasks
meet
Brendan K
8 years on Airtasker
- Joondalup WA
4.2
Overall rating
95 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
109 tasks
meet
Deon M
4 years on Airtasker
- East Fremantle WA
5
Overall rating
16 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
16 tasks
meet
Abdu T
6 years on Airtasker
- Perth WA
5
Overall rating
2156 reviews
99.87%
Completion rate
The percentage of tasks successfully completed by the Tasker
2290 tasks
meet
Michael F
8 years on Airtasker
- Morley WA
5
Overall rating
1513 reviews
99.94%
Completion rate
The percentage of tasks successfully completed by the Tasker
1708 tasks