Carpentry Jobs in East Melbourne

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in East Melbourne

Check out what tasks people want done near you right now...

Looking for someone on daily basic with tools, hourly rate with 4 hours minimum pay, $35/ hour

Camberwell VIC 3124, Australia

Sun Sep 13 2026

about 1 hour ago

Open

I need to modify the top of a timber barn door to fit the fixtures for a barn door. Maybe 15 mins work if you know what you're doing and you have the right tools. Reference images provided. Super easy job!

Melba Ward VIC, Australia

Sun Sep 13 2026

about 1 hour ago

Open

Looking for an experienced carpenter/handyman to install and finish three American Oak stair handrails. All materials are supplied — you just need tools and skills. THE HANDRAILS 1 x 5.0m — 4 brackets 1 x 5.3m — 4 brackets 1 x 1.2m — 2 brackets WHATS INVOLVED Cut rails to size and round off the ends neatly Mount brackets to wall and install Apply three coats of Clear Coat (supplied)once installed The existing handrails are fixed solidly into timber studs, so the new coach screws will go straight into the existing holes. A couple of the old coach screws won't budge, so we may need to trim them down if they can't be removed. YOU'LL NEED - Your own tools including drop saw/mitre saw, sander, drill/impact driver and a small hand grinder - Experience working with hardwood and a clean finish — cuts and coating need to look sharp - Drop sheets to protect the stairs and surrounding area

Richmond VIC 3121, Australia

Sun Sep 13 2026

about 1 hour ago

Open

Replace the hinges and latches on a 2-door vanity cabinet under the bathroom sink. Remove 4 existing flush-mount cabinet hinges (2 per door) and replace them with new ones. Remove 2 existing double ball latches (top/bottom strike plates & catches) and install new replacement latches. Ensure doors are properly aligned, swing freely, and catch securely. All replacement hardware (hinges, latches, screws) is fully provided. Easy access under the sink; photos attached showing existing hardware and cabinet layout.

Thornbury VIC 3071, Australia

Sun Sep 13 2026

about 3 hours ago

Open

Must have experience in cabinetry, especially the IKEA kitchen/laundry cabinet system. All the cabinets can be viewed in the image below

Northcote VIC 3070, Australia

Sun Sep 13 2026

about 4 hours ago

Open

I’m located in Mount Warren park, QLD, 4207 Carpenter/Joiner Needed – Timber Tabletop with 5 Bowl Cut-Outs I need a timber tabletop made for our slime business display/testing station. The tabletop needs to be approximately 1900mm long × 600mm wide. I need 5 clean, evenly spaced circular holes cut into the tabletop to hold plastic slime bowls. Important: I don’t want the bowls sitting flush with the timber. I want each bowl to drop approximately halfway through the tabletop, so roughly half of the bowl is visible above the timber and the other half sits underneath. This is so kids standing around the table can easily see the slime inside the bowls. I can provide the exact diameter/measurements of the bowls before the job is started. I can also supply one of the actual bowls if needed to make sure the cut-outs are the correct size and the bowls sit at the right height. I’m happy to supply the timber myself, or if you can supply a suitable timber panel, I’m happy to pay the additional cost for the timber. For the timber, we’re looking for pine or a similar light-coloured, nice-looking timber that isn’t overly expensive. We want to keep the natural light timber look and grain visible once it has been clear coated. Open to suggestions I’d like all 5 cut outs and the outside edges to be nicely finished with no sharp or rough edges. The timber needs to have a nice smooth/sanded finish. If the timber is purchased already sanded and smooth, that is completely fine. I’d also like the entire tabletop sealed with a durable clear protective coating, including the inside edges of all 5 cut-outs, so it is protected from slime/moisture, easy to wipe clean, and still keeps the natural light timber appearance. I’m just looking for a clean, neat and professional finished product. I am located in Mount Warren park, QLD, 4207

Sat Sep 12 2026

about 10 hours ago

Open

I have an open pantry space in my kitchen that needs to be fitted out with shelving and doors. Scope: ▪️Two narrow panels fitted to the sides of the existing kitchen cabinetry, for the doors to hang from. ▪️Doors to match existing IKEA melamine doors in the kitchen (confirmed a match is available). ▪️Fixed shelving mounted to the back wall with appropriate support underneath to hold the weight of glass jars, tins, and pantry items. Material open to the tradesperson's recommendation, doesn't need to match the IKEA melamine, but if it isn't melamine it will need to be painted white. ◾️Perforated copper inlay detail, will discuss placement and finish on site. ◾️No cabinet box needed, this is a simpler build attached directly to the space. Approximate Measurements: 238cm height, 74cm (opening) - 170cm (back) width, 58cm depth Details: ▪️Materials to be sourced and quoted by the tradesperson. ▪️Measurement to be confirmed on site before the job is priced. ▪️Budget shown is a rough guide only, final quote after inspection. Needed by end of September. Comparing quotes from more than one tradesperson before confirming, will go with whichever fits best for the job. Photos attached.

Southport QLD 4215, Australia

Sat Sep 12 2026

about 15 hours ago

Open

Custom Eyewear Display Cabinet Looking for an experienced cabinet maker/shopfitter to build and install a custom eyewear display in our optical store in Hawthorn. Approx 2400mm wide, consisting of: * Two equal display sections with a central mirror * Approx. 6–7 shelves each side * Integrated LED lighting * Timber finish to match existing cabinetry * Slim side panels * Existing lower bench/cabinetry and green fascia to remain

Hawthorn VIC 3122, Australia

Sat Sep 12 2026

about 21 hours ago

Open

Hawthorn VIC 3122, Australia

Sat Sep 12 2026

about 21 hours ago

Open

Browse all tasks

Last updated on 13th Sep 2026

Discover your earning potential in East Melbourne

Earn money with every carpentry task

$544

per week

1-2 tasks per week

$1,360

per week

3-5 tasks per week

$1,904+

per week

5+ tasks per week

$2,356

per month

1-2 tasks per week

$5,889

per month

3-5 tasks per week

$8,244+

per month

5+ tasks per week

$28,288

per year

1-2 tasks per week

$70,720

per year

3-5 tasks per week

$99,008+

per year

5+ tasks per week

*Based on average carpentry task prices in East Melbourne. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in East Melbourne

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$544	$1,360	$1,904
Staining	$1,000	$2,500	$3,500
Kitchen Cabinet Maker	$438	$1,095	$1,533
Cabinet Making	$300	$750	$1,050
Joiner	$800	$2,000	$2,800

*Based on average carpentry task prices in East Melbourne. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in East Melbourne

meet
Jake E
9 years on Airtasker
- Monbulk VIC
4.9
Overall rating
12 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
16 tasks
meet
Ethan N
9 years on Airtasker
- Donvale VIC
5
Overall rating
469 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
506 tasks
meet
Vinod T
9 years on Airtasker
- Kew VIC
5
Overall rating
1374 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
1581 tasks
meet
Shaun B
8 years on Airtasker
- Yarra Junction VIC
5
Overall rating
40 reviews
98%
Completion rate
The percentage of tasks successfully completed by the Tasker
50 tasks
meet
Anthony P
6 years on Airtasker
- Mount Waverley VIC
4.8
Overall rating
318 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
403 tasks
meet
Chengjun Q
4 years on Airtasker
- Balwyn VIC
4.8
Overall rating
469 reviews
99.47%
Completion rate
The percentage of tasks successfully completed by the Tasker
568 tasks
meet
Ana S
3 years on Airtasker
- St Helena VIC
5
Overall rating
18 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
24 tasks
meet
Murat A
27 days on Airtasker
- Mill Park VIC
5
Overall rating
33 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
34 tasks