Find local glass cutting professionals in NSW

I need (770mm x 570mm x 2 oval shape x 2, 570mm x 870mm rectangular x 2) 4 dressing table mirrors, 4 (278mm x 1128mm) tv unit glass and 10 (308mm x 308mm x 6, 308mm x 292mm x 2, 308mm x 335mm x 2) small size book shelf door glass need to be installed. Or some one can come and messure the size and install will be great.

Hi there, I’m looking for assistance to install a Fletcher glass cutter onto a brick wall. • The job should take approximately 2 hours • The unit needs to be securely mounted and level • The wall is brick • Photos of the cutter and wall are attached for reference

Bought pane of glass for a large frame but it’s 10mm too long for the frame. The glass is only 4mm thick so needs to be delicate.

Wana cutt glass in the middle in square shape and Wna fix there slides

Build a non-transparent glass doors or panel with handle for an open wardrobe with shelves. The design should be stylish and practical, without/with clear glass. I am open for new suggestions as well which will look good from your experience.

Need 3 x glass cut and polished to put on top of chess draws

Aircon pipes need to connect from interior to exterior of AC unit to Aircon. Cut a circle diameter of 65mm on the sliding door, so Aircon installer can run pipes from inside to outside. Glass needs to be cut on left side of the sliding door of the bed

* EASY QUICK 10 minute Job. 👍 * Easy straight cuts on 4mm Glass mirror. 👍 * Cut only. (We can POLISH it after ourselves). 👍 * Easy access to Convienient CBD Location 2 minutes from Hyde Park / CBD. 👍 * FREE ON SITE GARAGE PARKING. 👍 * Simply wish to cut a larger scrap mirror into a smaller one. If it accidently breaks we can provide additional scrap glass for additional tries. 👍 * Again, it's an easy job. (We actually often have it done by simply taking it to a local glass cutter up the street who charges $7 per cut. 👍 But this piece is a bit long so we don't want to risk breaking it. 😅). So basically it's mostly just a Quick trip to Surry Hills. 🙏👍😊 * REPEAT ONGOING EASY JOBS CONVENIENTLY LOCATED IN SURRY HILLS. (ALL WITH FREE ON SITE PARKING). 👍 We are using the smaller mirrors for an ongoing project so will be making numerous identical requests in the near future. 👍 * Approximate measurements (For example yeah Beautiful do you want me to put a piece of cardboard card yeah the wind WindCutting a 210 x 90 cm mirror to 150 x 50cm). So just 2 easy straigt cuts. (size may vary on the day ).👍

Cut glass and polish edges. 2 qty of 40cmx50cm 6mm thick and 1 qty 40cm x 160cm 6mm thick

I ideally would like to cut out the glass and put in a cat door because we need to keep everything closed in summer for the Aircon. First photo is of the glass second photo is where I’d like the cut to be to install the door

Cut 370 mm x 314 mm for doggy door through glass door.

Hi, I’m looking for a skilled professional with experience in glass cutting and window modifications. I have 15 studio rooms in Manly that each need a circular hole cut into an existing glass window to allow the hot-air exhaust hose of a portable air conditioner (approx. 2.5 kW) to be fitted safely and securely. Job Requirements: • Ability to safely cut a clean circular hole in glass (all rooms will require the same cut). • Install and secure the portable aircon vent hose once the units arrive. • Ensure the setup is safe, sealed, and stable so guests can’t tamper with it, the glass remains secure, and no outside air leaks in. • Provide your own tools and demonstrate relevant experience. Details: • Location: Manly • Rooms: 15 studio rooms • Task: Cut circular vent hole + install and secure exhaust vent • Timing: Flexible, but hoping to complete ASAP. If you’re experienced with glass cutting or glazing and have done similar work before, please get in touch with a quote and availability.

I need someone to install a duct for my Rangehood to the outside. I have the stainless steel ducting etc ready for install. There will be class cutting involved as it will be ducted through a glass plane. Welcome to inspect onsite for a better quote.

I need someone to cut a 130mm hole in glass panel so that I can install air conditioning. - Due date: Flexible

I have built a pod office in the backyard. I need a custom sliding glass door made 1350 wide 2150 high Framed 6.38 or 6.78 laminated

Glass panel cut to install dog door

Replace a broken glass have all material except glass cutter

Hi there, Hope you’re well. I’m looking to get a quote on a couple jobs. Job 1: add a mirror cupboard to my bathroom vanity. The hole is there, it more about adding a piece of glass on a hinge to the top. The size of the glass will be 350x660 mm. Job 2: replace my current window glass with clear glass. It’s mirrored currently and blocks too much light. The window has two panes, both doubled glazed. 570 x 500mm each. Two frames both double glazed. I’m based in Elizabeth Bay and

I need someone cutting a window glass to fit a square exhaust fan (photo attached) Apartment in ground floor, access from outside with a ladder. Looking for someone reliable with experience

2 glass panels needed for old cabinet cut install