Find local furniture repair handymen in Melbourne

I have 2 tasks: if they can both be done by the same person, that would be ideal. Otherwise, please specify which task you can do. 1) 2 drawers that go under an Ikea bed need repair. Seems like a quick job. Just the front panels need to be reattached. (see images) Bed is not valuable, so quick and easy repair sought. 2) Need an inexpensive tap installed in kitchen sink. No other plumbing work required. Just install the tap as the current one is broken.

My dishwasher is beeping four times and not starting the cycle. It’s draining all the water but won’t reset. Maybe something is stuck in the drain pump.

I’ve had a small IKEA wardrobe misassembled. Need someone to come past and redo it. Must be done today, before 5pm. I can provide all tools

repair my ikea lights including providing wire and plug my dog chewed the wire hence I need repair. please see photos located in Richmond/ Abbotsford thanks

1 door of a wardrobe is off the hinge 1 Ikea draw in a pax (chest of draws) won't close. Early morning would be best.

I have tried to put a few pieces of IKEA furniture together but haven’t quite gotten in right. Need someone to re-do and put together properly. 1 x tables 2 x drawers https://www.ikea.com/au/en/p/laneberg-extendable-table-white-80416137/?utm_source=google&utm_medium=surfaces&utm_campaign=shopping_feed&utm_content=free_google_shopping_clicks_Dining https://www.ikea.com/au/en/p/smastad-platsa-chest-of-3-drawers-white-white-s09387525/

I bought this adjustable standing desk: https://www.ikea.com/au/en/p/relatera-desk-white-s99560083/ I tried to assemble it. But when I used the hand crank, it only rises on one side. I checked the O-ring and it's fine. Could you please fix it so the desk rises evenly (and isn't lopsided) when I use the hand crank? Thank you.

I have an ikea bedhead that needs affixed to my wall i’ve attached pictures of the bed head itself , the brackets, and it’s been done before at two other properties In this particular room being a warehouse conversion, I believe there are some standard plastered areas and a masonry area of the wall with the whole of it covered in plasterboard , so you would need to take that into account when providing your fixtures, because while I have the brackets you’re the expert and I trust that what you use is best for the job so please be prepared for masonry.

Looking for an IKEA Besta hinge expert to fix my 3-door unit so all doors are even spaced and also hanging straight. I have stripped some of the hinge screws from fiddling around with it.

Have an Ikea queen size bed which is already set up but its making squeaky noises as some parts were not installed properly when the bed was assembled. Ordered new nuts and bolts from Ikea, someone needs to come install the new pieces. Dont believe the whole bed needs to be dismantled, only the new parts need to be installed. It’s a standard bed (not gas lift). See image for reference.

Bed frame hinge has come loose. See video. Need this screwed back in and fixed. Won’t take long

The draws / frame need tightening with screws.

Bought an Ikea bed on marketplace and the headboard won’t fasten to the sideboards. It also didn’t come with cam locks. Bought some on amazon but they’re not gripping the screws so need the headboard drilled into the sideboards by someone with a driver and long screws.

If someone knows how to fix this ikea chest of draws It’s been fully built but something has gone wrong I can probs find the instruction manual online It’s called malm 6 draws

We have the PINNIG shoe coat rack from IKEA. It is assembled but it needs to be anchored to the wall. The assembly kit provided two round rubber anchors but not the screws. And I also don't have a drill. I need someone to anchor this to the wall at the two points at the top as specified in the photos. Please bring your own tools plus screws, as the assembly kit didn't have extra screws for this purpose.

Ikea’s bed frame is Squizzy (making unpleasant noise)

We started putting a bed together. We did it wrong. Now there are some screws jammed. We need the bed put together please. Example of screw jammed attached.

Fix ikea Cupboard Drawers (see pic). Needs someone very good at DIY and knows ikea furniture.

Central beam of this ikea bed has become detached. Not sure exactly what the problem is. It's not in warranty period and I don't have spare parts.

Ikea bed frame has broken due to beam in the centre coming unstuck, causing ends to come loose. See attached photos. Would like this fixed. Here is the link to the ikea model (Mandal with storage): https://www.ikea.com/au/en/p/mandal-bed-frame-with-storage-birch-white-40280485/

The outdoor set is ikea namarro. 3 seat set. Currently still in flat pack. Anytime on Easter Friday or Saturday would be ok . Can organise visitor parking.

assemble 3 seat outdoor setting: https://www.ikea.com/au/en/p/revskaer-3-seat-conversation-set-anthracite-outdoor-30563395/

Sand top of table with orbe sander (only table top !). Paint table, box and 6 x chairs with waterproof marine varnish.

Assemble flat pack outdoor table and 2x bench seats

Just need someone to assemble my small outdoor furniture set and 4 dining chairs. Instructions included, probably very easy to do just not my thing. It is an apartment complex with plenty street parking nearby

Help putting this together

Outdoor wicker daybed needs to be assembled

I have 10 sets of these Jack and Jill outdoor bench chairs that I need assembled and cardboard thrown in bins provided. Good access and plenty of space to assemble.

Assembly of wicker outdoor setting

Bring tools like an electric drill to then construct an outdoor furniture flat pack. Coffee table, double seater lounge and 2 chairs. The delivery window at the moment is Wednesday-Friday 20th so I won’t know when the delivery will take place at this stage. Safe to say Saturday 21st or Sunday 22nd construction is best.

Large table, box and 8 chairs to be sanded and varnished.

Assembly of one 2 seater and two single seat Freedom outdoor furniture

Need a timber outdoor setting built

I need 2 people to assemble a 5 piece outdoor furniture flatpack. Then move and rearrange some future. 3 tables currently on the decking area need to be removed to the garage and the outdoor furniture assembled on the deck. There’s two flights of stairs between the deck and garage. Also need a TV mounted to a wall.

Hello, I am looking fit help to assemble this outdoor furniture setting. Includes 3 chairs, a bench seat and a table. See image.

Assemble one outdoor L shape 3 seater couch with small coffee table - brand new with instructions

I ordered outdoor furniture from Temple & Webster which I need assembled, not as complex as most assembly’s sharing the image ahead

We’ve just had outdoor furniture delivered but didn’t realise they wouldn’t assemble it - I need the table assembled and the rubbish removed. The chairs are assembled already but would like them unboxed next rubbish taken away. https://www.lavitafurniture.com.au/outdoor-dining-settings/fraser-mocha-7-piece-outdoor-dining-set-with-kiama-mocha-chairs-M8177.html?shopping=true&mobile=true&campaignid=16856767158&keyword=&userlocation=9112781&gad_source=1&gclid=CjwKCAiArva5BhBiEiwA-oTnXQ1Zxi9NTodaZb8uPdkpbaVm54SSbv05lhyLH6AJp-QKjG4-4XtcphoCKiMQAvD_BwE

I am needing some help to fit three window winders / locks and to help assemble some outdoor furniture

Picture frame put up, outdoor furniture assembled

1. Wardrobe leg has come off. Needs screwing back on/ repairing. 2. Chair leg has come off needs screwing back on/ repairing. 3. Putting together a small flat-packed desk. 4. Putting up a baby cot (flat-packed).

Inbuilt wardrobe door came off the hinges and needs to be screwed back on

Mirror needs to be replaced and frame and rail needs to be changed too estimation is ok as that s an insurance job

Wardrobe rail fell off the rail holder due to the middle holder broke down.

My wardrobe rail has broken off the bracket and I would like it to be reinstalled. I believe I will need new brackets as it appears to have snapped.

Our wardrobe bracket has come off the wall. It didn’t look like it had very deep screws and was glued in place. My landlord tried to fix the bracket but couldn’t get the drill to work because it is a solid brick wall. We have the new bracket, we just need someone who knows what drill and screws to use to fix the bracket in place.

Our wardrobe rack has broken off the wall and needs to be repaired due to the screws being too short. It was held in place by a bracket that holds up the shelf above it which needs to be reinforced.

Wardrobe doors x 2 will not close or slide they are stuck.

Needing someone to fix 2 x wardrobes to the wall (see pictures). Wardrobes are heavy and will need to be fixed to studs. Tasker will need to supply screws/fixings. Note the top cupboards are separate and will need to be either fixed to the base or the wall. I would also like a small hole cut in the back of one wardrobe so I can feed a power cord through.

Fix wardrobe sliding doors - have always stuck on bottom track

Hand rail slightly coming off in bathroom Wardrobe parts need put back on Small tear in carpet

Wardrobe has come off tracks and track part has come away

I am looking for a help to fix the wardrobe hinches

Wardrobe door need repairs ,posting pictures of door

Mirror glass has come away from wardrobe frame. Need it repaired.

Wardrobe door is having some problems. They can not close together. And one of them can not move smoothly.

Wardrobe needs to be assembled as it fell down. Screws, drill and wood glue may be required. As you can see it's partially assembled.

Apartment wardrobe slide door needs repair Looks like the top screw hanging the door has came loose

Wardrobe drawers fell off the wall - Due date: Needs to be done on Friday, February 2, 2024

I have 2200mm high timber veneer swing doors on my built in robe in 1 bedroom. 1 door leaf top hinge is broken / detached and cupboard door is not closing fully. - Due date: Before Friday, 22 December 2023

Dog has chewed the corner of Australian silky oak day bed and one slat has broken. Would like it restored please :)

Quote onsite for furniture rest-orators for mid century wardrobe. No major repairs needed, mainly clean and remove scuff and some paint marks and doors not closing properly, maybe hinges need realigning? Would appreciate if you can share any photos of this types of works you’ve done. Thank you!

Antique card table needs complete restoration, polish, table a little wobbly needs re gluing also Photos attached

Will likely need to strip, sand, then refinish. Some water damage and spots that have been lightly sanded so it’s needing some tlc!!

We'd like our chairs and a dining room table restored. Key things to note: - Solid timber table and chair frames (unsure about the type of wood) - One of the chairs needs new springs - The timber of the chairs and table is scratched and dented throughout - Legs of the table and chairs can be easily detached via a screw and clip system - Preferred finished option: sanded and remove existing varnish and replaced with clear satin hard wax oil - Metal feet of the table polished

Burnt a 10cm hole in wood shelving , need it repaired

4 outdoor chairs and possibly the table to be stained or oiled. Previously stained using Sikkens products but this has now peeled badly in places.

Looking for a skilled furniture restorer with mid century furniture experience. Working with veneer, stripping, colour matching, oiling, French polishing. Ongoing work… - Due date: Flexible

Looking for someone with experience in furniture restoration to restore a timber laminate desk. Will require sanding and re-staining. - Due date: Flexible

Eames chair button repair - Due date: Flexible

Candle burnt through wooden mantle on the fireplace. Needs to be puttied and painted. A few burn marks on the floorboards also need repairing. - Due date: Flexible

My 100+ year old pine chest of draws needs some specialist love to bring it back to be usable again. The frame needs re strengthening and the draws have dropped and don't. slide. Most of this is the internals of the unit. This is for a very experienced woodworker who will take pride in bringing back this beautiful piece. I'm happy for this to be a longer term project as the piece is storage. Most likely you would need to inspect first. (sorry about to dodgy pic) - Due date: Flexible

Wooden table for sanding and polishing

Hi there, I have a wooden table that needs some TLC to look new again. It has a couple of blemishes and minor scratches. Please let me know if can complete the task.