Find a sockets and switches installation professional in Blacktown

Licensed and insured electrician needed to fix/replace switches and power outlets in house. Also to remove fire alarm housing from ceiling and fix other outlets that has popped out of wall. -2x 2gang switch outlets to be REPLACED. -2x power outlets not working. No power coming out. REPAIR AND RESTORE POWER to outlets (Powerpoints used to work before. They stopped working about the same time. They're on the same wall almost directly opposite each other). -1x smoke alarm to be DISCONNECTED AND REMOVED from ceiling (Already have new smoke alarm installed). -2x wall outlets to be FIXED back to wall. - Due date: Flexible

I have 5 different switches that are faulty. Need to replace them with exact same color and look. Switches need to be of best quality as some of these were replaced recently.

Add 2 new power sockets 1 in garage 1 in bedroom - Due date: Before Sunday, 11 December 2022

4 gang wall switch replacement - Due date: Flexible

After the storm, some plugs and lights are tripping the safety switch - Due date: Before Thursday, 29 September 2022

wall switch - Add 1 new for lights, replace 2 (the 2 replace include wiring 2 bathroom fans to the switches) GPO's - add 3 single storey house roof access all wall plasterboard - Due date: Needs to be done on Thursday, 14 July 2022

I have bought the LED downlights with Surface Sockets from Bunnings. I just need someone to install 12 surface Sockets. Once Sockets are installed, I should be able to replace the LED lights. The LED downlights that I have bought are these: https://www.bunnings.com.au/arlec-9w-tri-colour-dimmable-led-downlights-with-plug-bases-5-pack_p0192642 And have a look at the attached photos for the current LED light connector types. 8 LED lights are connected to one switch. And the rest 4 lights are connected to a different switch.

An outdoor weatherproof switch and an indoor switch to be replaced - parts provided.

Requesting quote to replace 4 old switches (2 x single switches and 2 x double switches). I have already got the new ones from Bunnings. The quote is for installation only. - Due date: Before Friday, 3 June 2022

Need a simple electrician work to remove existing switch and light cover so that gyprock work can happen. Fixing of new unit is later ., so this work is simple removal of unit shown so that gyprock work can be done

Hi there, I need someone to move 3-4 switches around in my kitchen. It needs to be done by Wednesday. Location : Blacktown

My exhaust fan switch is not staying in "on" position. It needs to be replaced.

New one bed Apartment, so need to fix switch sockets as per convenience. 2 switch plate 2 pcs in the TV wall unit and 3pcs -2 switch plate on the wall. Image attached. - Due date: Before Friday, 18 March 2022

I have electricity in my house but some power sockets in the garage aren't working. Just the garage power sockets alone aren't getting any power. Need someone to check the connection. - Due date: Flexible

Need to install a 1x 4-port RJ45 socket in the living room, single-port RJ45 in two other rooms and run wire beneath the house. Existing ethernet wire also need to be transferred to the new 4x socket. ETHERNET CABLE WILL BE PROVIDED - Due date: Flexible

I am looking for a quote to do the following electrical works at my home: 1) Replace 1 x 4 gang switch with 1 x deta smart 4 gang switch and install 1 shelly dimmer for 1 switch in this gang. 2) Replace 1 x 5 gang switch with 1 x deta smart 4 gang switch and install 1 shelly wifi switch for the 5th switch and install 2 shelly dimmer for 2 switches in this gang. 3) Replace 1 x 6 gang switch with 1 x deta smart 4 gang switch and rewire 2 extra switch to near by switch gang. 4) Replace 1 x 1 gang switch with 1 x deta smart 3 gang switch and rewire above 2 extra switch to this gang.(6 gang and 1 gang switches are close by, less that a metre apart) 5) Replace 1 x 2 gang switch with 1 x deta smart 2 gang switch 6) Replace 3 x 1 gang switch with 3 x deta smart 1 gang switch 7) Replace 2 x double power point with 2 x deta smart power points. 8) If possible, install a new down-light plug behind the door bell display (the display is close to the 5 gang switch from point 2 above) All the deta/shelly switches and downlight plug/wire will be provided. - Due date: Flexible

Install of following smart switches in a two storey home: 2 x 1 gang 4 x 2 gang 6 x 3 gang 2 x 4 gang All current switches have neutral wiring behind them. The replacement Brand is iswitch, link below: https://iswitchoz.com.au/faqs Electrician must be fully vaccinated and proof of vaccination will be requested prior to commencement of the job.

Two light switches are a bit out of the place as kids pressed them too hard as show in pic. Need to be fixed or replaced. One more single switch board is shaky at one end. need to be glued

-Replace 9 existing light switches with new ones (combination of single and double switches) -Replace 1 existing single GPO with a new DGPO. - one of the switch is for a 2-way light which is playing up. Light does not turn on from one of the switch till other switch is turned on. Seems like a power supply issue. This is a recent issue. - I have all the switches and gpo.

Units at Blacktown Need lights to be refitted in bed rooms and living rooms other area. Need some lighyxx ex switches to be looked at And other minor things I supply light fittings