Find local power point installers in Melbourne

A RentSafe compliance check found unearthed power points across the original cottage and a 1990s kitchen and bathroom addition. The report lists 6, but the electrician missed several points inside cupboards — the actual count is 11. The rear slab section is compliant, and the switchboard has a main earth electrode and a compliant RCD. Access notes: subfloor is not crawlable, so work needs to come from the roof space or wall cavities. Roof space is accessible via a manhole above the bathroom. Kitchen and bathroom are tiled. Scope: - Run earths to 11 power points - Install 2x 10A RCBOs for the lighting circuits - Electrical compliance certificate on completion Fixed price please. Licensed electricians only — happy to share the full inspection report.

I need installed 2 double Clipsal Weathershield single outdoor power points (GPO), there is one already installed 2 meters away, so you may be able to move that one and source power from there. Plus, Relocate a Pierlite BWP/T236EL IP65. It is a legacy 1200mm (4-foot) twin-tube IP65 weatherproof fluorescent batten one meter away. Check a fuse for a 3 phase switch that no longer seems to be working.

I need a licensed electrician to replace one existing double power point with a new USB-A & USB-C power point. I will supply the new power point. Straight replacement only — please see photo.

We want to put a power point in wall to mount tv

I live in an appartments. Looking for an electrician to install a new power point on my hallway wall. The other side of the wall is my bedroom, and there is already an existing power point on the bedroom side of the same wall. I’d like to add a new power point on the hallway side, ideally around the same location.

I’m looking for a licensed electrician to install one new double power point on a plasterboard wall in my apartment. There is an existing double power point approximately a few metres away near the marble shelf, which I’d like the new outlet to potentially be supplied from. The job: * Install 1 x standard double GPO underneath the existing picture frame (see photo). * Ideally run the cable inside the plasterboard wall cavity from the existing power point. * I want no visible cabling or plaster chasing between the two points. * Only the necessary cut-out for the new GPO. * Please assess whether the existing GPO/circuit is suitable for the additional outlet. * Supply and install the GPO. * Test and leave the installation compliant and tidy. * Licensed electrician only – Victorian electrical regulations apply. Budget: $250–$300 Seeking a fixed price agreed before starting. Please quote including labour, materials and installation and confirm you are a licensed electrician in Victoria. Photo attached showing the existing socket and proposed location

6 x gpo to be connected on newly installed skirting boards . Holes have been cut out.must be licensed electrician.cab be done today or tomorrow.

Licensed Electrician Needed – Anytime Fitness Richmond VIC We are looking for a licensed electrician to install new power points at Anytime Fitness Richmond, VIC. Work required: *Recovery area: Install 6 new power points *Cleaning room: Install 2 new power points **8 new power points in total Photos are attached for reference to show the areas where the power points are required. The gym is located in Richmond, VIC. Please provide a quote for the work, including labour and materials. Must be a qualified/licensed electrician. Thanks!

Looking for a licensed electrician for a few small jobs in my apartment: Diagnose and repair/replace one side of a double power point that has stopped working. Replace one bedroom downlight that is not working. Install a Dyson wall charging dock onto a plasterboard wall next to a power point. I have the Dyson dock and charger, but no wall fixings. While here, I'd also like you to check whether my 4 kitchen downlights can be converted to dimming and provide a separate quote. The 4 adjacent living-room downlights have previously been converted to dimming. Please include any standard small parts/fixings required in your offer and let me know if the power point or downlight replacement parts would be additional. Licensed electrician required.

Looking for a reliable electrician/handyman to complete two small jobs at a business premises in Richmond: 1. Fix a wall power point/socket that is currently not working. 2. Install 2 x Ring security cameras (plug-ins, no wiring required) onto concrete walls. Cameras are already purchased and ready to install. Please bring the appropriate tools/drill and fixings required for mounting into concrete.

We need a licensed electrician to relocate an existing double power point approximately 50–100mm sideways. We recently had timber wall panels installed and unfortunately the opening cut into the panels does not line up with the existing power point (see attached photo). The job should involve: * Disconnecting and relocating the existing power point approx. 50–100mm to line up with the opening in the timber panels * Cutting/adjusting the plasterboard behind the panels as required * Reinstalling and securing the existing power point * Reconnecting and testing everything to ensure it is safe and compliant The wall is plasterboard and access is already exposed as shown in the photo. Please bring any mounting bracket / electrical materials required. Licensed electrician only please.

Must be a qualified electrician. 1. Add 1x additional power point inside apartment. Double pole ref pic 2. Add 1x additional tv antennae wall port inside apartment. Single pole only NB: There are existing power points and TV antennae wall ports close to where I need additional ones within the apartment

Looking for a licensed electrician to complete the electrical work required for a new heat-pump hot-water system being installed ( new double power point) Hot water system: Midea RSJ-23/300RDN7-L2 280L heat-pump hot-water system with electric element. Job details: • New Midea unit will replace the existing Aquamax gas hot-water system shown in the photos. • A suitable weatherproof outdoor Double power point/electrical connection is required for the new Midea unit. • There is already an external power point supplying the ducted heating approximately 2–3 metres away. • Good access underneath the house via the subfloor. • Photo of the existing switchboard is attached. • Electrician to determine whether an existing circuit can safely and compliantly be used/extended, or whether a new dedicated circuit/RCBO is required for this particular Midea unit. Please quote your best ALL-INCLUSIVE price for everything electrically required to have the Midea ready for connection, including labour, weatherproof power point, cabling, circuit/RCBO if required, materials and electrical compliance/safety certificate. Please base your offer on the information and photos provided and advise in your offer exactly what is included. Must be completed by a licensed electrician and fully compliant. Thankyou 😊👍

To install new 2 x double power points in pantry in high rise apartment.

Hello, Need a electrician to provide certified job changing a power point for a new dishwasher as the wall plug doesnt fit with new dishwasher and needs to be made a flat plug. Or move the power point. Also need a ceiling bathroom fan/ heater thing installed in bathroom please.

Need 2 power points installed around the house. - front room: 1x recess power point for tv - kitchen: 1x power point dropped below another for dishwasher installation. - other power points located close by - walls are plasterboard - double storey house (only at rear/kitchen) front room there’s nothing above.

Installation of a double power point in place of existing single power point and install additional double power point in kitchen. Walls are brick and plaster.

Help me replace 2 LED light bulb, power point button, and drawer slider in apartment

Top story one bedroom apartment, pitched roof with man hole located in ceiling, plug needs to be installed in a cupboard to connect a tv

Extension cord in socket a year ago. Worked fine never removed. Stuck in socket completely