Find local power point installers in Melbourne

Replace a new one please . Power point socket

I’m looking for a licensed electrician to install a 15-amp single-phase power point in my residential garage. Details: Existing garage outlets are standard 10A Installation likely requires a dedicated 15A circuit from the switchboard (please confirm) Property is a standard residential home Garage is used as a small workshop (CNC router planned) Scope of work: Supply and install a compliant 15A power point Run cabling from the switchboard if required Install appropriate breaker/RCD Test and certify the installation Ensure all work complies with Australian electrical standards Please include in your quote: Whether a site visit is required before quoting Total cost (labour + materials) Availability/timeframe Electrical licence number Happy to provide photos of the switchboard and garage if needed. Thanks!

Looking for a licensed electrician to do a full electrical inspection of a 3 bed, 1 bath, 1 dining/kitchen, 1 lounge house. Old house so not that many sockets. About one socket and one ceiling light per room. + Relocate a power point 2/3 meter from existing socket. Existing socket is in the skirting board. Please see photo. Please provide quote. Thank you!

Licensed Electrician – Power Point Check & Install Looking for a licensed electrician to check and install power points at my home. I’ve marked up photos: • Red crosses = existing power points • Yellow crosses = proposed new power points • Blue ? = old/unused power point to be checked Issue: When plugging in a Haier heat pump dryer, the power point sparked (washing machine already plugged into the same outlet). Stopped immediately. Needs checking for safety and advice on whether a dedicated outlet is required. Job includes: • Safety check of sparking outlet • Advice + install new power points as needed • Check old/unused outlet After a cost-effective solution. Licensed & insured only. Photos provided.

Two power points located in the oven cavity are to be relocated to the next adjacent cupboard. This is to crest further space in the existing oven cavity to fit a new 10amp oven. New hole to be drilled to enable cords to be fed to the new location. May need to join and provide additional electrical cable to get to new spot.

Install new power point on a plasterboard wall & hang a 50 inch TV (bracket will be provided)

Install additional power point in attic

Install new power point and replace 2 dimmer switches with regular switch

Install power point in attic and replace light dimmer switch with normal light switch and replace power point covers with more modern covers(to be supplied)

install double power point (you to provide) Replace existing ceiling exhaust fan with larger unit, (provided by customer) Install light dimmer switch. (you to provide)

Need electrician to install 3 power points on same wall

Install a power point in the garage on the interior wall opposite of the main electricity box for fiber modem.

Fixing of power point socket/panel - I don’t think it need re wiring but needs to be removed, put back in properly and replastered.

Install a power point on the wall or a power access in the roof.

A wall has been removed. 1 light switch and one PowerPoint ran in that wall as shown. Socket needs to move to inner wall with subfloor access and existing wire. S/f new socket. Switch needs to be relocated as practical.

Replace a double GPO in bathroom

Hi! I’m looking to get a 10amp outdoor weatherproof power point installed in my car port, to slow-charge my e-Bike/car. The previous owner also left some questionable wiring in the adjacent shed area (looks like a permanently wired in extension cord) - it’s probably not compliant. I’d like to get rid of this. Quote for supply and install please.

Need a power plug installed outside so I can plug in our new boiler. There is a power point on the other side of the wall so should be an easy job. Pics attached. You need to be a certified electrician.

Install single weather-proof power point onto front fence post. Power is already in place, refer photo.

G’day, there are two power points in my house that are not connected to electricity that I want to be connected. Another task is, the connection to the fan isn’t working, I need you to have a look if the issue is the fan or the installation.