Find a cladding professional in SA

Looking for a carpenter or experienced handyman available TODAY to build two simple timber frames either side of a fireplace, similar to the attached picture. Approx. 1200mm wide × 1000mm high each. They are shallow frames that will later be covered with decorative panelling. One side needs to frame around existing NBN boxes while keeping them accessible. Straightforward job for someone with the right tools and experience. Need this completed today. I will pay for timber battons on top… you can either bring materials with you or I can go buy now to have ready…

I have installed mdf Panelling around the kitchen (pictured) and it needs to be painted. 1 base coat and 2 top coats. Paint and brushes supplied and ready to go, I will also prep the area for you. All 3 coats need to be done tomorrow. Depending on time availability, I might do the base coat and it will be ready for the top coat before lunch time. Someone with attention to detail please. The photo of the complete kitchen is a render and how it will look once complete . There is another photo of an example of how much mdf cladding there is… This is a mock up before we had installed it. Job is in prospect

Need wall cladding to be dine near Tv unit something kike in picture

Recently moved in to new house and discovered that the reverse side of the rear wall has not been clad. The Hardieplank is on site, but will need to be installed, sealed and painted please.

I have a property where the cladding on the top part of the home is coming away. Refer attached photos. I am wanting to remove the existing paneling and replace it with new cladding.

Cladding and two lights across back of pool , approx 6m in length

Some of the stone cladding on my front pillar has fallen off. Could you please provide a quote to repair and reattach the stone?

Hi I have a small garden bed made from blocks. I would like to install some wall cladding stones on them. I also have a few square meters of wall in front of my house that needs stone cladding. I can provide you with all the materials required for the job. You will need the tools required to finish the job. Thanks

2x top coats. We will supply all paint. 14.5 m one side, 6.5m other side. 2.4m high.

Looking for someone to measure, cut and install internal wall cladding to our timber wood counter. Cladding panels and all required materials/equipment will be supplied. Installation will be using construction adhesive (glue), so no specialised tools are required beyond standard fitting equipment. I’m looking for someone with experience installing wall panels or cladding who can accurately measure, cut and fit the panels to a high standard.

Looking to get outdoor cladding done for house front as per photo. Width is about 10 metres including sides, height looking at about 2 metres. Need clean work Happy to provide cladding from myself. No time wasters pls

Build a wall 9ft high outdoor wall between two steel posts already in place , using timber frame , add centre post , finish with blue board on both sides and seal joins . Contractor to supply materials .

Title: Roofing / Cladding Labour Needed for Small Tool Shed and Verandah Back Wall Job Description: I’m looking for an experienced roofer or cladding tradesperson to complete two small jobs at my property. Job 1 – Tool Shed Cladding and Roofing I have a small tool shed frame ready to go. The four posts are already installed in the ground and the roof trusses have already been made. I need someone to: * Drop the trusses into place * Attach C-channel to three walls * Attach roof framing/channel as required * Install the iron roof sheets * Install wall sheets/cladding The shed dimensions are approximately 2.7m x 2.7m x 2.7m. I have all materials already on site, including roof sheets, wall sheets, C-channel, screws and fixings. I only need the labour and someone with the right tools and experience. Job 2 – Verandah Back Wall Cladding I also need a back wall installed across the rear of my verandah. The wall is approximately 2.7m high x 8m wide. I have all materials for this as well, including the sheets, channels, capping and screws. The sheets will need to be trimmed to size and attached neatly. Additional Details: All materials are supplied. Labour only required. Looking for someone reliable, experienced with Colorbond/iron cladding and roofing, and available to complete the work as soon as possible. Please provide a quote and your availability.

Scope of Works: • Remove and dispose of existing external wall cladding. • Inspect wall framing and repair minor defects if required. • Supply and install new metal/iron wall cladding. • Install new flashings, trims, and weatherproofing components.

Looking for Batten cladding installer

Screw in cladding 100 screws into metal and wood fill joints 1 coat paint

Screw down back cladding seal joints and paint 1 coat aide back container

Paint feonr side container cladding wall in Clayton Bay paint there

The wall got crack marks so I would like to install cladding panels to cover and make the living area look nicer.

Looking for an experienced tradesperson to install 134m2 of CFC Axon cladding. Must have experience with this specific product and own tools. Please send me a direct message if you are interested so we can discuss the details and rates.