Hire a trusted shelf hanging expert in NSW

Install 3 Floating Timber Shelves in Kitchen Looking for an experienced handyman/carpenter to supply and install three rustic timber shelves in my kitchen. My wood preference is Tasmanian oak but happy to hear your suggestion on other types of wood. Requirements: Supply and install 3 shelves as shown in the attached photo/reference. Rustic timber finish (similar to the example image). Preferred option is floating shelves with concealed brackets for a clean, modern look. Shelves will be used to hold mugs, glasses and small potted plants, so they must be securely installed and capable of supporting moderate weight. If true floating shelves are not suitable due to the tiled wall or weight requirements, I am happy to consider discreet black or timber brackets underneath. Shelves to be positioned evenly on the tiled wall, aligned with the tile lines where practical. Please include all materials, fixings and installation in your quote. Please provide: Photos of similar shelving projects you have completed. Recommended shelf thickness and weight capacity. Whether you believe floating shelves are achievable on this tiled wall. Your total price including materials and installation. Location: Roselands, Sydney. I have attached a photo of the wall where the shelves will be installed.

Install a few chairs and a floating shelf

secure/attach shelving cupboard to wall so secure, and won't fall. Install shelving and file dividers.

I need two shelves installed in this laundry closet. Shelves dimensions would be approx 480x475. I suspect there are a few pipes in this area given its proximity to the laundry and a toilet.

Install various shelves, rails in bathroom (see pictures): 1. Install 2x Scalloped Edge Wall Shelf onto tiled wall 2. Install 2x Estilo 600mm Single Towel Rails onto tiled wall 3. Install 1x Wavy Edge Shelf onto tiled wall I have some screws and wall plugs. You will need to bring your own tools. Day/time can be negotiated.

I need 3 shelves installed in a space inside a built-in wardrobe in the bedroom. If you have experience with custom shelving and can handle the prep and install, put in a quote. We can discuss details and timing as to what suits both of us.

I need one small shelf installed on the wall. Two holes have already been drilled at the correct position, so the work simply involves setting the anchors/fixings and securing the bracket(s). The shelf style should match the existing shelf directly above it — please refer to the attached photo. I also have a few additional handyman tasks to discuss once on site. Please note: I am an NDIS participant, so I require a provider who is able to invoice accordingly.

I recently had a solar system installed and want to add a Shelly Pro EM-50 or similar smart energy meter for consumption monitoring, with a contactor to turn the hot water supply on and off based on a set schedule: overnight off-peak and during solar export. Setup Specs: 6.6kW Solar Panels 5kW Solis Solar inverter S6-GR1P5K-S Rinnai Hotflo 3.6kW / 250L hot water system Scope of works: 1. Install and wire Shelly EM Pro in the extension sub-board (the grey box on the right in the solar setup picture shown) 2. Connect one CT clamp around the main grid feed 3. Connect the second CT clamp around the solar inverter output 4. Install suitable contactor (Hager 25 Amp (AC1) 2 Pole Contactor With 230 Volt AC Coil & 2 x N/O Auxilary Contact) to control the 3.6 kW HWS circuit currently hardwired through 40A MCB 5. Verify connectivity to home Wi-Fi 6. Label installations and leave access for future configuration. I can handle configuration via Shelly app. Pictures of the solar setup and hot water unit included. Mentioned budget is for labour and parts. Happy to purchase the below Shelly and contactor myself: Shelly EM PRO Wi-Fi Energy Meter Hager 25 Amp (AC1) 2 Pole Contactor With 230 Volt AC Coil & 2 x N/O Auxilary Contact

Need a licensed sparky to install a Shelly Pro 3EM-3CT 63 (3-phase energy monitor) into my residential switchboard this Saturday. The job: Install 3 × split-core CT clamps around the 3-phase mains cables between the meter output and main switch Mount the Shelly Pro 3EM unit (DIN rail or adjacent) Wire a 240V AC feed to power the unit (from a spare MCB or existing circuit) Verify it powers up and CTs are reading What you DON'T need to touch: The Endeavour Energy revenue meter (Elster A1100), sealed, stays as is Service fuses Solar inverter or array wiring Any existing circuits What's already here: 3-phase board, dual supply (grid + rooftop solar) Elster A1100 meter, Endeavour Energy network Tenby Cables switchboard, Left + Right modules The Shelly unit and all 3 CT clamps — I have everything, just need it installed I'll provide: Full installation guide with wiring diagram (already prepared) Photos of the switchboard for your reference (attached) The Shelly Pro 3EM unit + 3 CT clamps (all supplied) You'll need to bring: Short length of 35mm DIN rail if there's no spare space on the existing rail (board looks fairly full, may need to mount a small rail segment on the back panel) 1 × MCB (6A or 10A) to protect the Shelly's 240V power feed Short lengths of wire for the 240V feed (L + N to the unit) Location: Kellyville Ridge, NSW When: This Saturday — flexible on time, morning or afternoon Budget: $150 – $200 This is a straightforward install, no modifications to existing wiring, no meter work, just clamp-on CTs and a small monitoring unit. Should take 30-45 minutes for anyone familiar with switchboard work. Must hold a current NSW electrical licence. Happy to see your licence number before confirming. Cheers!

Install 6 shelves into stud wall. Gap is approx 50cm wide. Will need to supply shelves will cover cost for those separately

I purchased some floating shelves and need somebody to drill the necessary holes in brick walls to help install them. Thank you!

I have a painting that needs to be hung on the wall and a small floating shelf to be installed. The wall is gyprock and I think concrete might be behind the gyprock so a hammer drill and wall plugs could be required however I’m not 100% sure. It’s a small job that should take 60 minutes or less.

1) simple installation of 2 shelving units (see image) 50cm tall 60cm wide - Drill 8 holes into Mansonry Wall only (screws provided). Install Floor to Ceiling light (see image) - requiring securing to ceiling.

Looking for an experienced handyman to help with a few wall mounting tasks in my apartment: 1. Install curtain rod - Curtain rod fell down (kitten-related incident) - I have the correct brackets/fittings, just need proper installation into wall 2. Mount 1x large mirror (approx 120x90cm) - Currently leaning on the floor and needs to be securely mounted to wall - Frameless, so have experience with mounting heavy mirrors please 3. Install 1x floating shelf in living area - Lightweight from bunnings Notes: - Apartment walls (likely p concrete) please bring tools and masonry plugs) - Must bring drill, I have a level but feel free to bring one - Looking for a clean, secure and safe install (i’ve had a mirror fall before and it’s not pretty) Photos attached for reference. Ideally Friday day time or Saturday morning, can be flexible

Looking for an experienced and reliable handy person to help install several items in my home. The job requires measuring, drilling into walls (including concrete), and general installation. Please bring your own tools. Jobs required: Wardrobe shelves (x2) Install two small shelves inside a wardrobe (see photos). Will require measuring, cutting the shelf material, and installing supports/brackets. I can arrange/purchase the shelf materials under your instruction if needed. Floating bedside table Install a floating bedside table (approx. 40 cm x 30 cm) onto a bedroom wall. Pin board installation Mount one pin board onto a wall. Bike rack installation Install 5 Steadyrack bike hangers onto a concrete wall in the garage(comes with what is needed).

After a skilled person to install two IKEA "LACK" floating shelves. The primary requirement is that they are mounted with maximum stability and weight-bearing capacity. Would prefer someone who has experience with this shelving system and can ensure a perfectly level, secure finish. Brick wall Thanks

Just need to install these shelves in this storage room. The shelves are already bought - as attached in the photos & a pic of the storage room is provided

1. Install 4 shelves inside cuboard approx length 100 cms width 50 cms. Photo 1 2. Install wooden slab to keep microwave 75 cms length 60 cms width. Pic 2 3. Fix 1 cabinet door handle. Pic3

Need about 10 IKEA shelves mounted on the wall in my office

Need a professional to safely affix shelf to internal wall (masonry) Shelf is: * 91 cm wide x 15 cm deep x 23 cm high * Weight Capacity: 9 kgs * Material : MDF * Colour: white Came with its own mounting hardware, but not 100% certain if it can be used to mount on to brick internal wall. See picture attached for what the holes on the shelf look like. We have attempted to do this ourselves but needs a professional to securely attach safely with the right equipment. May need deep anchor hooks/ dynabolts. Happy to purchase those myself ahead of install if you tell me which ones to get. Otherwise please bring appropriate material and tools to install. Happy to provide any extra info required ahead of job acceptance. Thanks