Find professional metal gate repairs in North West Melbourne

One of the upper hinges on our metal driveway gate has broken away from the gate frame and needs to be repaired/re-welded. The lower hinge is still intact, and the gate is currently closed and secured with ground bolts. The gate is not used frequently, but we rent out the parking space behind it, so safety and long-term stability are important. Looking for someone experienced with metal gate repairs / welding to: • Repair and securely re-weld the broken upper hinge • Add reinforcement if needed for a strong and durable repair • Check the other three hinges and gate posts for any cracking, corrosion or signs of fatigue • Let me know if any other preventative reinforcement is recommended The gate opens outward and there is good access from the driveway. A vehicle is currently parked behind the gate, but it should not interfere with the repair. Please bring your own welding equipment and tools. Photos attached. Please let me know your proposed repair approach and estimated cost based on the photos. Ideally looking to have this repaired by Wednesday 23 September.

Spray Painting – Metal Gate Glossy White Finish Looking for an experienced to spray paint a metal gate in glossy white. 📍 Located in my garage/backyard 📏 Measurements are shown in the attached photos. Requirements: * Glossy white finish * Suitable for outdoor use and local weather * Clean/degrease the metal thoroughly with mineral spirits first * Apply a suitable metal prep primer/base coat * Finish with a durable epoxy topcoat * All preparation and materials to be included Please provide a fixed total price including ALL materials and labour. No additional/extras costs after accepting the job.

damaged metal gate needs repairs. Send through a quote including labour and material costs.

I have a metal side gate where the latch/bolt goes into a brick wall. The brick has worn out and been patched previously and the bolt can now be forced out, wearing away the brick. I need a proper, long-lasting fix. I believe we need to drill into the brick and install a steel receiver/sleeve (tube) for the bolt or something similar to fix the issue. Open to other ideas!

Need help repairing a broken outdoor gate. The gate hinge/bracket has come loose from the post and the gate is currently not secure. Looking for someone experienced with gate repairs, metal work, fencing, or handyman work. Last task was brought down by Airtasker because I uploaded a video

Looking for someone to help paint 3 metal gates. Details: • 3 gates • 1 coat of paint • Both sides of each gate • Gates are metal • Paint and brushes are provided • No prep required other than basic wipe-down • Ground-level, easy access

The solid metal gate does not close or lock, as shown in the photos. It requires necessary adjustments, weldin g or removal of pieces

I have been told this is a big job. I have mobility issues and the gate is too heavy for me to comfortably close each night manually. Cost to electrify it? Quoted $6000 which I think is outrageously high. Any advice much appreciated

Steel side gate misaligned due to screw with door frame. It needs fixing.

Hello, one side of my gate has broken hinge. Needs repair. Photo attached of the issue and the gate

Pick up wooden posts, timber, metal gates and cut up sheets

Latch is broken to balance the gate to close with a remote control

Need to cut a chain mesh metal gate and then sleeve and reinstall - Due date: Needs to be done on Monday, 29 January 2024

We have three gates that need to be hinged to steel posts. Two are in our driveway (as a pair that swing shut together) and the other is on the side of the house, swinging shut against the property's fence. Gates and steel posts provided. Posts already concreted into the ground. The third picture shows the old post fitting, which would be a welding option. However, the hinges could also be bolted on. Any cost of materials used (ie hinges, bolts) will be covered as well if you provide a receipt.