Pest Control Jobs in Melbourne

Browse through over 500 Pest Control Jobs.

See what you could earn

$0

per month

Based on average pest control task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Pest Control tasks in Melbourne

Check out what tasks people want done near you right now...

We have an old 8 foot round in-ground trampoline that we’ve just bought a replacement mat and springs for. I’m looking for someone who can: 1. Remove the existing mat and springs (the springs are hooked into the round steel frame and have rusted in places) 2. Dig down about an extra approx. 10cm at the edge increasing to approx 30-40cm deeper in the centre (the hole for the trampoline was never dug deep enough when installed so adults can feel the ground when jumping)

Lake Ward VIC, Australia

Wed Jun 17 2026

34 minutes ago

Open

We are purchasing a heat pump dryer that needs to sit on the floor so we need to remove a cupboard for this to fit and then fix the wall where the old dryer was mounted and extend a shelf and pole to create more room.

Elsternwick VIC 3185, Australia

Tue Jun 16 2026

about 2 hours ago

Open

Need a door carpenter to remove old entry doors including timber frame and install new entry doors including metal frame and smart lock (supplied).

St Kilda East VIC 3183, Australia

Tue Jun 16 2026

about 12 hours ago

Open

I want to get a dishwasher installed under my kitchen island. there was a microwave and a small dishwasher installed underneath it. to accomodate that i need to remove the microwave support panel and side panel . Its just the panel that need to be removed, and not the dishwasher itself as that will be removed the person installing it. Location is southbank 3006

Southbank VIC 3006, Australia

Tue Jun 16 2026

about 14 hours ago

Open

We moved on to a new office and we need to install Ubiquiti Unifi Access Ultra reader in front of our door and a electromagnetic lock on the door for access control. The Access Ultra will be powered by our Cisco C3850 24P-S Switch. We have already purchased the electromagnetic lock, the Unifi Access Ultra reader, and Push to Exit button. We just need someone to come and install the setup.

Melbourne CBD VIC 3000, Australia

Tue Jun 16 2026

about 15 hours ago

Open

Really simple just need to click backs in seats and connect seats with the hooks. And remove cardboard. Everything else is done’

Northcote VIC 3070, Australia

Tue Jun 16 2026

about 16 hours ago

Open

Need help fixing the flooring near the fridge area, to get the flooring done properly so that it’s covering the full fridge area. Remove existing if necessary and relay so the flooring will flow properly and not like It’s patched up. Spare boards available for use.

Essendon VIC 3040, Australia

Tue Jun 16 2026

about 17 hours ago

Open

Looking for someone with an engineering, fabrication, workshop automation, or strong DIY/mechanical background to help design and build a bench-top devalving station for empty non-refillable cylinders. Purpose: safely and efficiently remove small brass threaded valves/necks from empty non-refillable cylinders such as Smartwhip-style N2O canisters, Billi/Zip tap CO2 bottles, and cream chargers, so the metal can be recycled. This is currently done manually with a rattle gun and special socket. I want to improve efficiency and safety by building a simple station where the cylinder is clamped securely and the valve area is guarded. Important: all cylinders are checked/vented before this step. This is not for gas filling, gas handling, or pressure work. It is only for mechanical removal of valves from already-checked cylinders. I still want fallback safety in case residual gas ever remains. Looking for: Bench-top/workbench-mounted fixture Rubber-lined V-cradle to hold cylinder horizontally Clamp to stop spinning/movement, ideally foot-pedal pneumatic Guide/support for rattle gun/socket alignment Valve-side capture tunnel/guard Steel/rubber/polycarbonate guarding around valve end Chute/bin for removed brass valves Faster and safer than fully manual work Main safety feature: the valve end should sit inside a capture tunnel/box. The rattle gun stays outside, with only the socket entering through an access sleeve. If a valve came loose unexpectedly, it should be contained by steel/rubber/polycarbonate guarding and directed down into a bin. Ideal person: fabrication, pneumatic clamps, workshop jigs, mechanical design, maintenance fitting, metalwork, or DIY automation experience. Please reply with your experience, how you’d approach it, whether you can work with air tools/pneumatics, rough labour/materials estimate, and any safety/efficiency suggestions. Happy to jump on a call.

Melbourne VIC 3004, Australia

Tue Jun 16 2026

about 17 hours ago

Open

Bathroom vanity and cabinet installation with modifications. Looking for a cabinet maker, carpenter or IKEA installer to replace an existing bathroom vanity and install new IKEA bathroom cabinetry. Scope of work: • Remove and dispose of existing vanity and mirror cabinet • Assemble IKEA bathroom furniture: * ÄNGSJÖN vanity (same width as the current vanity) * ÄNGSJÖN tall cabinet * FAXÄLVEN mirror cabinet * Modify the tall cabinet an vanity as required to accommodate existing plumbing, washing machine services and pipework behind the cabinet bu creating cut-outs in cabinet panels where required * Install and securely wall-mount all cabinets Note: Plumbing and electrical work will be arranged separately unless you are licensed and able to provide those services.

Melbourne VIC 3182, Australia

Tue Jun 16 2026

about 19 hours ago

Open

Browse all tasks

Last updated on 17th Jun 2026

Discover your earning potential in Melbourne

Earn money with every pest control task

$350

per week

1-2 tasks per week

$875

per week

3-5 tasks per week

$1,225+

per week

5+ tasks per week

$1,516

per month

1-2 tasks per week

$3,789

per month

3-5 tasks per week

$5,304+

per month

5+ tasks per week

$18,200

per year

1-2 tasks per week

$45,500

per year

3-5 tasks per week

$63,700+

per year

5+ tasks per week

*Based on average pest control task prices in Melbourne. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Melbourne

Explore pest control related jobs and discover your financial opportunities

Type of pest control job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Pest Control	$350	$875	$1,225
Wasp Nest Removal	$240	$600	$840
Flea Treatment	$300	$750	$1,050
Cockroach Control	$378	$945	$1,323
Possum Removal	$158	$395	$553

*Based on average pest control task prices in Melbourne. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Pest Control Taskers in Melbourne

meet
Kirk M
10 years on Airtasker
- Plumpton VIC
5
Overall rating
470 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
517 tasks
meet
Andy T
8 years on Airtasker
- Windsor VIC
4.9
Overall rating
7 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
8 tasks
meet
Mutshimans K
8 years on Airtasker
- Melbourne City CBD VIC
4.7
Overall rating
558 reviews
99.87%
Completion rate
The percentage of tasks successfully completed by the Tasker
778 tasks
meet
Umesh K
8 years on Airtasker
- Melbourne City CBD VIC
4.9
Overall rating
1100 reviews
99.93%
Completion rate
The percentage of tasks successfully completed by the Tasker
1354 tasks
meet
Rain P
3 years on Airtasker
- Melbourne City CBD VIC
5
Overall rating
161 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
206 tasks
meet
Mustapha -
3 years on Airtasker
- Melbourne City CBD VIC
5
Overall rating
248 reviews
99.26%
Completion rate
The percentage of tasks successfully completed by the Tasker
270 tasks
meet
Nilesh D
2 years on Airtasker
- Tarneit VIC
5
Overall rating
272 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
319 tasks
meet
Marino A
3 months on Airtasker
- Malvern East VIC
4.7
Overall rating
73 reviews
97.83%
Completion rate
The percentage of tasks successfully completed by the Tasker
92 tasks