Drafting Jobs in Blacktown

Browse through over 500 Drafting Jobs.

See what you could earn

$0

per month

Based on average drafting task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Drafting tasks in Blacktown

Check out what tasks people want done near you right now...

Offer negotiable. I can pick up the finished product on the weekend (need to be within 30 min driving distance from Glen Waverley). Please leave comment on your offer and pick-up suburb - thank you! > > > 10 x Wood stands (please see attached blue print) • 5 × Units: 50cm Total Length • 5 × Units: 60cm Total Length 1. Critical Non-Negotiables (Red on Diagram) • Total Overall Height: Must be exactly 11cm from the floor to the top surface across all 10 units. • Total Length: Must be exactly 50cm or 60cm (as specified above). 2. Flexible Dimensions - but aim as close as possible (Black on Diagram) • Width: Aim for ~12cm. Using standard off-the-shelf 116mm DAR Pine is highly preferred to eliminate width-trimming labor. • Thickness: Standard 18mm or 19mm off-the-shelf stock is preferred. • Suggestion on Cuts: If using standard 19mm stock, cross-cut your legs to exactly 91mm to hit the mandatory 11cm overall height. 3. Joinery & Assembly Rules • Joint Type: Simple butt joints are OK. • Fastening: Fix using premium PVA wood glue combined with timber screws. • Screw Placement: Drive vertically down through the top plate into the legs. • Countersinking: All top screw heads must be countersunk below the surface so the track can sit completely flat. • Flush Ends: The outer faces of the legs must sit completely flush with the ends of the top plate. • Finishing: Lightly sand back all sharp edges and corners.

Mon Nov 02 2026

about 3 hours ago

Open

Looking for an experienced tiler for a small bathroom in Whalan NSW 2770. Floor tiling only, one visit, no wall tiles. The job: 1. Bathroom floor about 6 sqm (room roughly 2.1 x 2.8 m), including a tiled shower floor. 2. Shower floor needs falls to the waste. Main floor stays flat, no floor waste. 3. Tiles go over the existing mosaic floor tiles, timber subfloor 4. Grout, and silicone at wall junctions and corners What is already done before you arrive: 1. Plumbing rough in by a licensed plumber 2. Waterproofing done I supply all tiles, adhesive and grout. Timing: end of December or early January. Please include your price, availability, and photos of similar jobs.

Whalan NSW 2770, Australia

Mon Nov 02 2026

about 10 hours ago

Open

Need a heavy wall mirror hung securely. Item: Wall Mirror (arched, solid wood frame) Size: 120cm wide x 90cm high x 4cm deep Weight: 20kg Hanging hardware: supplied by the manufacturer Wall type: [plasterboard] Location: living room, ground floor Please fix into studs or use heavy-duty anchors rated for 20kg+, and make sure it’s level. Bring a drill, stud finder and level. A second person is helpful given the size.

Quakers Hill NSW 2763, Australia

Mon Nov 02 2026

about 15 hours ago

Open

I need a one-off metal adapter plate made so my Samsung The Frame 32" TV (QA32LS03TBWXXY, 2020) can go on a standard VESA 200 × 200 mm wall mount. This TV uses Samsung’s own wide mounting pattern, so normal 32" mounts don’t fit. The plate copies an existing product, the MonLines V071, which isn’t sold in Australia. I have its technical drawing (PDF attached) with the key dimensions: Overall plate: approx. 724 × 419 mm Mount side: VESA 200 × 200 mm hole pattern (M6 or M8 to suit the wall mount) TV side: 4 holes at roughly 584 × 277 mm spacing, for M4 screws TV weight: about 5 kg I’m after: Steel or aluminium plate, around 2–3 mm thick (open to your recommendation) Laser cut or drilled to the drawing, edges deburred Black powder coat or paint preferred, but not essential I can confirm the exact hole positions and sizes on the TV before you start, and I’m happy to send photos of the back of the TV. Ideal for someone with metal fabrication, laser cutting or CNC experience. Location: Sandhurst, Melbourne. Delivery by post is fine. Budget: $150-$200

Sun Nov 01 2026

about 17 hours ago

Open

Please adjust the existing blackout curtain and sheer curtain by raising their installed position so that the curtains do not touch the floor. Both curtains should hang slightly above the floor after adjustment.

Melonba NSW 2765, Australia

Sun Nov 01 2026

about 19 hours ago

Open

Hi there, Looking for an experienced epoxy flooring trade/specialist to supply all materials and complete a professional, multi-layer epoxy floor installation for a single-car garage. We are looking for a heavy-duty, long-lasting finish resistant to hot-tire pickup, oil/chemical spills, and daily vehicle traffic. Job Overview: Area Size: 1-Car Garage (~18 to 22 m²) Concrete Condition: Clean concrete slab (free of major damage/oil stains). Required Scope of Work (Full Supply & Install): Mechanical Prep: Full mechanical diamond grinding of the slab (plus edge grinding) to establish a porous surface profile, followed by industrial HEPA vacuuming. Slab Repairs: Fill any minor surface cracks/divots with 2-part epoxy or polyurea filler and grind flush. Primer / Base Coat: Apply 100% solids commercial-grade epoxy base coat. Flake Broadcast: Full flake broadcast system (vinyl decorative color flakes to refusal). Topcoat: Scraping/vacuuming excess flakes, followed by a clear, UV-resistant Polyaspartic or Polyurethane topcoat for maximum durability and UV protection. Requirements for Bidders: Must supply all commercial-grade products (primer, base, flakes, topcoat) and bring all heavy prep equipment (diamond grinder, dust extractor, spiked shoes, rollers). Must have proven experience with epoxy floor systems (please attach photos or links to recent garage work). Must provide clear warranty terms on labor and hot-tire pickup resistance.

Rouse Hill NSW 2155, Australia

Sun Nov 01 2026

1 day ago

Open

My kitchen floor is 2.7m x 2.3m. The kitchen floor space includes Fridge and Dishwasher. I have flooring in my living room and looking to get matching or similar flooring done in the kitchen

Seven Hills, New South Wales

Sun Nov 01 2026

1 day ago

Open

Looking for a licensed & registered plumber to inspect and clear hardened construction trade debris stuck inside the waste pipes of 4 2nd-floor bathroom drains.

Rouse Hill NSW 2155, Australia

Sun Nov 01 2026

1 day ago

Open

Garage floor, rockery, walls and doors

Kings Langley NSW 2147, Australia

Sun Nov 01 2026

1 day ago

Open

Browse all tasks

Last updated on 2nd Nov 2026

Unlock new income opportunities in Blacktown

Explore drafting related jobs and discover your financial opportunities

Type of drafting job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Building & Construction	$640	$1,600	$2,240
Shed Installation	$640	$1,600	$2,240
Pergola Installation	$770	$1,925	$2,695
Driveway Repair	$360	$900	$1,260

*Based on average drafting task prices in Blacktown. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Drafting Taskers in Blacktown

meet
Phuoc L
10 years on Airtasker
- East Sydney NSW
4.9
Overall rating
295 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
360 tasks
meet
Hassan B
9 years on Airtasker
- Padstow NSW
5
Overall rating
927 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
970 tasks
meet
Darren B
6 years on Airtasker
- Haymarket NSW
5
Overall rating
193 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
230 tasks
meet
Muhammad sudheer H
4 years on Airtasker
- Harrisdale WA
4.8
Overall rating
108 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
133 tasks
meet
Serguei K
4 years on Airtasker
- Sydney City CBD NSW
5
Overall rating
158 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
172 tasks
meet
Muhammad N
3 years on Airtasker
- Schofields NSW
4.7
Overall rating
168 reviews
99.49%
Completion rate
The percentage of tasks successfully completed by the Tasker
196 tasks
meet
Bill L
2 years on Airtasker
- Roselands NSW
5
Overall rating
297 reviews
99.74%
Completion rate
The percentage of tasks successfully completed by the Tasker
386 tasks
meet
Luke V
2 years on Airtasker
- Oatley NSW
5
Overall rating
108 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
137 tasks