Carpentry Jobs in Ryde

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Ryde

Check out what tasks people want done near you right now...

Offer negotiable. I can pick up the finished product on the weekend (need to be within 30 min driving distance from Glen Waverley). Please leave comment on your offer and pick-up suburb - thank you! > > > 10 x Wood stands (please see attached blue print) • 5 × Units: 50cm Total Length • 5 × Units: 60cm Total Length 1. Critical Non-Negotiables (Red on Diagram) • Total Overall Height: Must be exactly 11cm from the floor to the top surface across all 10 units. • Total Length: Must be exactly 50cm or 60cm (as specified above). 2. Flexible Dimensions - but aim as close as possible (Black on Diagram) • Width: Aim for ~12cm. Using standard off-the-shelf 116mm DAR Pine is highly preferred to eliminate width-trimming labor. • Thickness: Standard 18mm or 19mm off-the-shelf stock is preferred. • Suggestion on Cuts: If using standard 19mm stock, cross-cut your legs to exactly 91mm to hit the mandatory 11cm overall height. 3. Joinery & Assembly Rules • Joint Type: Simple butt joints are OK. • Fastening: Fix using premium PVA wood glue combined with timber screws. • Screw Placement: Drive vertically down through the top plate into the legs. • Countersinking: All top screw heads must be countersunk below the surface so the track can sit completely flat. • Flush Ends: The outer faces of the legs must sit completely flush with the ends of the top plate. • Finishing: Lightly sand back all sharp edges and corners.

Mon Nov 02 2026

about 5 hours ago

Open

Hi, I'm looking for someone to build a new internal partition wall using timber framing and plasterboard (Gyprock). Specifications: Width: 2.5m Height: 2.7m (floor to ceiling) Finished thickness: approximately 100–120mm Timber stud framing Plasterboard on both sides Plasterboard jointing, taping and sanding Skirting boards to match existing The wall will be fixed to the existing floor, ceiling and adjoining wall. No painting is needed Please provide a quote including materials and labour.

Roseville NSW 2069, Australia

Mon Nov 02 2026

about 12 hours ago

Open

Carpenters to build Murphy door Build and install a Murphy door 2m wides 2.6 high with mirror and side architectural panels see inductive image I will pay for all materials including Mirrors you must organize them especially the hinges you Must have all required tools and be skilled in carpentry and joinery

Rhodes NSW 2138, Australia

Mon Nov 02 2026

about 17 hours ago

Open

I have an existing outdoor timber stairs, that need replacing. Same design as existing, so requires an experienced carpenter. You can quote with materials or without & I'll pay for supplies from Bunnings, just let me know when you apply for the job. These outdoor steps traverse a standard 900cm Retaining Wall.

Denistone West NSW 2114, Australia

Sun Nov 01 2026

1 day ago

Open

Outdoor wooden shed repair: shed door has fallen off, door frame and timber planks damaged. Please provide two quotes: all‑inclusive (labour + outdoor‑grade materials) and labour‑only (we supply materials). Damage photos attached.

Sydney NSW 2117, Australia

Sun Nov 01 2026

1 day ago

Open

Repair and Restore Outdoor Timber Stairs We have 18 outdoor steps made from timber planks with crushed granite infill. Over time, weathering and water damage have caused several timber joins to separate, with some sections rotting and pulling apart. We need an experienced carpenter or handyman to inspect and repair the entire staircase, including: * Repairing approximately 6–12 damaged joins across the stairs. * Replacing any rotten or badly weathered timber where necessary. * Drilling and securely fastening the timber joins to ensure the steps are stable and structurally sound. * Treating or protecting repaired timber against moisture and further deterioration. The goal is a thorough, high-quality, long-lasting repair that restores the stability of the whole staircase and helps it withstand the weather for years to come. Please include any relevant experience with outdoor timber repairs. All materials and tools supplied by you. If you request more information about the task, happy to supply so you can quote appropriately.

East Ryde NSW, Australia

Sun Nov 01 2026

1 day ago

Open

Repair of timber doors and plaster board wall caused by a dog scraching

Turramurra NSW 2074, Australia

Sun Nov 01 2026

1 day ago

Open

I’m looking for a contractor that can create a custom residential large parcel box 1000mm x 800mm with exact measurements all provided and graphics of examples. Can be a timber finish or press metal finish or an alternative. I’m not really fussed with that. I don’t want an advanced structural or advanced design styled the more basic the better. If you’re capable of doing this type of build please let me know and I can provide exact dimensions and details Quote needs to cover all costs including postage to 2601

Sat Oct 31 2026

2 days ago

Open

Make a Cabinet in both room

Rhodes NSW 2138, Australia

Fri Oct 30 2026

3 days ago

Open

Browse all tasks

Last updated on 2nd Nov 2026

Discover your earning potential in Ryde

Earn money with every carpentry task

$600

per week

1-2 tasks per week

$1,500

per week

3-5 tasks per week

$2,100+

per week

5+ tasks per week

$2,598

per month

1-2 tasks per week

$6,495

per month

3-5 tasks per week

$9,093+

per month

5+ tasks per week

$31,200

per year

1-2 tasks per week

$78,000

per year

3-5 tasks per week

$109,200+

per year

5+ tasks per week

*Based on average carpentry task prices in Ryde. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Ryde

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$600	$1,500	$2,100
Staining	$1,000	$2,500	$3,500
Kitchen Cabinet Maker	$510	$1,275	$1,785
Cabinet Installation	$500	$1,250	$1,750
Joiner	$800	$2,000	$2,800

*Based on average carpentry task prices in Ryde. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Ryde

meet
Rodrigo A
7 years on Airtasker
- Drummoyne NSW
5
Overall rating
792 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
934 tasks
meet
Mauri L
8 years on Airtasker
- Willoughby NSW
5
Overall rating
495 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
569 tasks
meet
Mark K
8 years on Airtasker
- Kellyville NSW
5
Overall rating
45 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
52 tasks
meet
Tony E
3 years on Airtasker
- Concord West NSW
5
Overall rating
34 reviews
95.12%
Completion rate
The percentage of tasks successfully completed by the Tasker
41 tasks
meet
Guy R
9 years on Airtasker
- Pymble NSW
4.8
Overall rating
127 reviews
99.44%
Completion rate
The percentage of tasks successfully completed by the Tasker
180 tasks
meet
Jasky R
6 months on Airtasker
- Plumpton NSW
5
Overall rating
44 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
52 tasks
meet
Enrico D
1 year on Airtasker
- Kingswood NSW
5
Overall rating
21 reviews
96.3%
Completion rate
The percentage of tasks successfully completed by the Tasker
27 tasks
meet
Hugo H
2 years on Airtasker
- Leichhardt NSW
5
Overall rating
8 reviews
72.22%
Completion rate
The percentage of tasks successfully completed by the Tasker
18 tasks