Carpentry Jobs in Box Hill NSW

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Box Hill NSW

Check out what tasks people want done near you right now...

Custom walnut-finish drinks cabinet Looking for someone to build a drinks cabinet similar to the attached image. Size: 1,000 W × 450 D × 900 H mm, including legs. Dark walnut finish, fluted doors, brass-tone handles, and an open centre with a hanging wine-glass rack and bottle storage. Quality engineered board is fine; solid timber isn’t required. Shipping to Pakenham, VIC. Please quote materials and labour, estimated timeframe, and any delivery costs. Potential for repeat orders if the quality and pricing work wel

Fri Oct 09 2026

1 day ago

Open

We have 2 tables and 2 wall hung vanity cupboards we would like remade into wood or wood veneer. The tables will have a stone top (25mm overhang at the front and 6mm overhang either side stone snd basin already purchased). The wall hung vanities sit approximately 150mm below the table. The table legs are slightly concave at the top and taper to the floor. Dimensions Tables 1 x L1800 x w 550 x h 780 - 2 holes needed 1 x L 1400 x w 500 x h 780 - 1 hole needed Vanity cupboards 1 x L1400 x w 420 x h 300 - 2 electrical connections either end and holes for plumbing 1 x L110 x w 420 x 300 1 electrical connection on left hand side and hole for plumbing. We would like quotes. We have originals for inspection if needed. Questions welcome. Dimensions available.

Fri Oct 09 2026

1 day ago

Open

Hi, I need a local carpenter or handyman for a quick cabinetry modification to my kitchen island. The spaces are already cleared out and ready to go. The job involves: 1. 600mm wide cavity: Install a standard 600mm-wide internal cabinet frame into this void. It needs to sit on a small base to meet the 870mm under-bench height. Inside, I need one fixed shelf for a microwave and one drawer installed underneath it. 2. Other cavity: Add internal packing strips to the side walls so a new cabinet door can be cleanly hinged and hung flush with the rest of the kitchen.

Box Hill NSW 2765, Australia

Fri Oct 09 2026

2 days ago

Open

We're a cabinetry installation business based on the Gold Coast. We're looking to connect with experienced cabinetmakers and cabinetry installers interested in regular ongoing subcontract work. We have a variety of projects including kitchens, laundries, wardrobes, vanities and custom cabinetry installations. **This $10 task is for a brief introductory phone discussion** to chat about your experience, availability, rates and potential opportunities to work together. We're hoping to build relationships with reliable, experienced installers who take pride in their workmanship. If you're interested, please make an offer and briefly let us know about your installation experience. Looking forward to chatting!

Fri Oct 09 2026

2 days ago

Open

Create 3 wooden box as a cover for sunscreen lotion bottle. Please see photos for measurement and idea. Wood and supplies to be supplied by tasker.

Thu Oct 08 2026

3 days ago

Open

Hi, I need an experienced cabinet maker or joiner with a professional workshop setup to fabricate 5 cabinet doors and 1 side panel. This job must be completed off-site at your workshop and delivered back finished. The Design Setup (High Attention to Detail Needed): • Face & Reverse: The front laminate sheet and the back laminate sheet are different colours. • Edges: Each of the four edges on the doors/panel will feature a different colour ABS edging (e.g., matching the face, reverse, or specific accent borders). Precise attention to detail is required to ensure the correct edging goes on the correct side. What needs to be done: 1. Supply Substrate: You must supply the 16mm Moisture Resistant (MR) MDF core sheets. 2. Pick Up Materials: Collect the raw materials from my location in Seaford Vic 3. Laminate Pressing: Glue and press the laminates flat onto both sides of the 16mm MR MDF core using proper workshop pressing equipment (no air bubbles or telegraphing). 4. Precision Cutting: Cut the sheets cleanly down to the final sizes without chipping the laminate. 5. Multi-Colour Edge Banding: Apply the specific ABS edging variations to each designated border and trim flush. 6. Delivery: Drop off the 6 completed, finished pieces to my address. Approximate dimensions of finished pieces: • 5 x Doors: Roughly 60cm x 80cm each • 1 x Side Panel: Roughly 60cm x 80cm What I will provide: • 2 x Large sheets of laminate (1.8m x 3.6m each — two different colours) • All required rolls of ABS edging (in the different colours needed) What you must have/supply: • Supply of the required 16mm MR MDF sheets. • Commercial workshop setup (cold/hot press, precision panel saw, and edge-bander/trimmer). • Transport to pick up the 1.8m x 3.6m sheets and deliver the finished doors safely. Please outline your experience with custom laminate work and your estimated turnaround time in your offer. Thank you!

Sun Oct 04 2026

6 days ago

Open

I need a custom replacement bed leg made to match my existing teak bed frame. • Shape: Simple rectangular prism (rectangle block). • Timber: Tasker to source the timber. Looking for Teak, New Guinea Rosewood, or a similar heavy hardwood that can be oiled/stained to match a weathered/tarnished teak colour. • Dimensions: 210 mm H x 85 mm W x 85mm D. • Fixing: It needs to attach via an M8 thread protruding from the top. Please see the attached photo of my existing bed leg for the exact colour/tarnish and fixing type. Let me know what timber you plan to use in your offer. Pickup or drop-off can be arranged, or on-site install if you are local to Balgowlah.

Sun Oct 04 2026

7 days ago

Open

Need some laundry cupboards built and installed, not a big area

Mon Sep 28 2026

13 days ago

Open

have a small timber stand that needs to be stripped back from its current painted finish. The top is slightly loose and may need to be hammered or tightened to make it stable. Once stripped and sanded, I’d like the timber finished in a light natural oak tone (similar to a Tassie-style oak finish).

Sun Sep 27 2026

14 days ago

Open

Browse all tasks

Last updated on 11th Oct 2026

Discover your earning potential in Box Hill NSW

Earn money with every carpentry task

$420

per week

1-2 tasks per week

$1,050

per week

3-5 tasks per week

$1,470+

per week

5+ tasks per week

$1,819

per month

1-2 tasks per week

$4,547

per month

3-5 tasks per week

$6,365+

per month

5+ tasks per week

$21,840

per year

1-2 tasks per week

$54,600

per year

3-5 tasks per week

$76,440+

per year

5+ tasks per week

*Based on average carpentry task prices in Box Hill NSW. Actual marketplace earnings may vary

Join Airtasker

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Box Hill NSW

meet
Peter L
11 years on Airtasker
- East Sydney NSW
4.9
Overall rating
1216 reviews
99.93%
Completion rate
The percentage of tasks successfully completed by the Tasker
1341 tasks
meet
Kent L
1 year on Airtasker
- Bella Vista NSW
5
Overall rating
180 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
185 tasks
meet
Tanner P
3 years on Airtasker
- Narellan NSW
5
Overall rating
88 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
105 tasks
meet
Nauman A
5 years on Airtasker
- East Sydney NSW
4.9
Overall rating
155 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
173 tasks
meet
Ryan H
10 years on Airtasker
- St James NSW
4.8
Overall rating
125 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
157 tasks
meet
Phuoc L
10 years on Airtasker
- East Sydney NSW
4.9
Overall rating
295 reviews
99.72%
Completion rate
The percentage of tasks successfully completed by the Tasker
361 tasks
meet
Patrick G
5 years on Airtasker
- Colyton NSW
5
Overall rating
17 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
20 tasks
meet
Gaurav M
2 years on Airtasker
- Riverstone NSW
4.9
Overall rating
92 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
96 tasks