Carpentry Jobs in Sutherland Shire

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Sutherland Shire

Check out what tasks people want done near you right now...

I’m looking for an experienced handyman or cabinet maker to modify our existing laundry cabinetry so that our new washing machine can fit into the space. As shown in the first photos, the washing machine area is currently restricted by the existing cupboard next to it. We need part of the cupboard/side panel cut back or removed to create enough room for the new washing machine to fit. Important: Please also refer to the third photo, which shows the existing plumbing. The plumbing and water connections will need to be taken into consideration when modifying the cabinetry to ensure everything remains accessible and the washing machine can be connected properly. Ideally, we would like the work completed neatly, with any exposed edges finished off professionally. Please have experience with cabinetry, carpentry or laundry modifications. Happy to arrange a time for someone to inspect the space and provide a quote.

Roselands NSW 2196, Australia

Wed Nov 04 2026

about 17 hours ago

Open

Offer negotiable. Looking for someone to make 10 very simple wooden U-shaped stands, based on the attached blueprint. This is a straightforward woodworking job involving just cutting, gluing and screwing together flat pieces of wood. No complicated joinery or specialised finishing required. Quantity and dimensions - 5 × stands, 50cm long - 5 × stands, 60cm long - Overall height: Exactly 11cm (non-negotiable) - Width: Approximately 12cm - Material thickness: Approximately 18–20mm Please refer to the attached blueprint for the design. Preferred materials (in order) 1. DAR Pine – preferred, ideally standard 116mm-wide stock to minimise cutting. 2.Plywood – approximately 18mm thick. 3. MDF – approximately 18mm thick. Happy to consider other suitable, affordable timber options. Construction - Simple U-shaped construction: one top piece and two end supports per stand. - Basic butt joints using wood glue and screws. - Screw heads should be countersunk so the top surface is completely flat. - Supports should be flush with the ends of the top piece. - Light sanding to remove sharp edges and corners. No painting, staining or elaborate finishing required. Collection - I can collect the completed stands on a weekend. - Please be located within approximately 30 minutes' driving distance of Glen Waverley, Melbourne. When making an offer, please include: - Your proposed price (including materials). - Your preferred timber/material. - Your pickup suburb. Thank you!

Wed Nov 04 2026

about 19 hours ago

Open

Just need to put a cover on the open area as per the image on 2 bathrooms. Just need to put the hinges and cut the board

Wed Nov 04 2026

about 20 hours ago

Open

I have 2 metal kitchen stools that need to be shortened so they fit underneath my kitchen island bench. The stools have square metal tube legs with removable plastic end caps. The job involves removing the plastic feet, cutting each leg evenly to the required height, around 25mm and reinstalling the feet. The stools have a square metal frame with lower footrest bars, so all cuts and modifications will need to be completed accurately and symmetrically. The stools must remain level, stable, and consistent in height once completed. These are high-quality stools, so precision and a professional finish are important. Please only apply if you are confident working with metal furniture and can ensure an accurate result. Suitable for a handyman, metal fabricator, or someone experienced with metal cutting and furniture modifications.

Picnic Point NSW 2213, Australia

Mon Nov 02 2026

3 days ago

Open

Looking for an experienced carpenter or joiner to give two IKEA PAX wardrobes a seamless, built-in appearance. One wardrobe is a corner configuration, and the other is a straight wardrobe. Both are currently without doors. Scope includes: * Building out and finishing the gaps between the top of the wardrobes and ceiling * Allowing for or integrating existing ceiling cornices for a neat finish * Creating a side infill panel for one wardrobe to close the gap to the adjoining wall * Ensuring all finishes are flush, tidy and look like custom built-in joinery The wardrobes are already assembled and in position. Ideally looking for someone experienced in IKEA PAX hacks or custom joinery who can recommend the best approach. Timing: Ideally this week or next, during weekday business hours (9am–5pm). Please quote for labour, and share examples of similar work if available.

Carlton NSW 2218, Australia

Sun Nov 01 2026

4 days ago

Open

Need two timber frames built for Cabana area and tie into existing structure. One wall is approx 4300 and other is approx 2 metres. Frames should be cut to size and built from existing Oregon Timbers I have onsite and will look to install rafter on this area within the next week. Looking for hourly or day rate and should have suitable tool for the required work.

Miranda NSW 2228, Australia

Sun Nov 01 2026

4 days ago

Open

The timber carport structure requires restoration, with all exposed timber surfaces to be sanded back using a sanding machine to prepare them for re-oiling. The vertical timber strips along the upper gable sections may need to be temporarily removed to allow proper access and thorough sanding. Once sanding is complete, all timber surfaces are to be cleaned of dust and debris before applying the provided timber oil evenly to achieve a consistent finish and restore the timber’s appearance. (Oil is provided)

Bundeena NSW 2230, Australia

Sat Oct 31 2026

4 days ago

Open

I’m looking for a contractor that can create a custom residential large parcel box 1000mm x 800mm with exact measurements all provided and graphics of examples. Can be a timber finish or press metal finish or an alternative. I’m not really fussed with that. I don’t want an advanced structural or advanced design styled the more basic the better. If you’re capable of doing this type of build please let me know and I can provide exact dimensions and details Quote needs to cover all costs including postage to 2601

Sat Oct 31 2026

4 days ago

Open

Make a cabinet for our outdoor area that fits a small black fridge and some shelving

Kurnell NSW 2231, Australia

Sat Oct 31 2026

5 days ago

Open

Browse all tasks

Last updated on 5th Nov 2026

Discover your earning potential in Sutherland Shire

Earn money with every carpentry task

$600

per week

1-2 tasks per week

$1,500

per week

3-5 tasks per week

$2,100+

per week

5+ tasks per week

$2,598

per month

1-2 tasks per week

$6,495

per month

3-5 tasks per week

$9,093+

per month

5+ tasks per week

$31,200

per year

1-2 tasks per week

$78,000

per year

3-5 tasks per week

$109,200+

per year

5+ tasks per week

*Based on average carpentry task prices in Sutherland Shire. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Sutherland Shire

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$600	$1,500	$2,100
Staining	$1,160	$2,900	$4,060
Kitchen Cabinet Maker	$900	$2,250	$3,150

*Based on average carpentry task prices in Sutherland Shire. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Sutherland Shire

meet
Ry R
12 years on Airtasker
- Shellharbour NSW
4.9
Overall rating
102 reviews
98.39%
Completion rate
The percentage of tasks successfully completed by the Tasker
124 tasks
meet
Ganbileg G
9 years on Airtasker
- Rhodes NSW
5
Overall rating
238 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
269 tasks
meet
Matt M
9 years on Airtasker
- Cronulla NSW
5
Overall rating
468 reviews
99.81%
Completion rate
The percentage of tasks successfully completed by the Tasker
522 tasks
meet
Aaron C
9 years on Airtasker
- Kirrawee NSW
4.9
Overall rating
44 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
50 tasks
meet
Cody T
2 years on Airtasker
- Botany NSW
5
Overall rating
481 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
600 tasks
meet
Louie C
1 year on Airtasker
- Miranda NSW
5
Overall rating
36 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
45 tasks
meet
Nicolas A
10 months on Airtasker
- Revesby NSW
4.9
Overall rating
15 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
17 tasks
meet
Danilo F
9 months on Airtasker
- Redfern NSW
4.5
Overall rating
59 reviews
98.44%
Completion rate
The percentage of tasks successfully completed by the Tasker
64 tasks