Carpentry Jobs in Newcastle

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Newcastle

Check out what tasks people want done near you right now...

one kitchen cabinet doors is damaged and I need to have a replacement made. It is 730 mm × 600 mm x18mm. It is a flat slab-style door panel with a spray-painted finish， no glass colour is Green spruce ，Dulux . Actually, the job isn’t difficult. just need to cut a 700 mm × 600 mm piece of MDF, then take it to a spray shop to have it 2-pack painted. If you regularly make cabinet doors, this should be a very straightforward job for you.

Brighton VIC 3186, Australia

Mon Oct 05 2026

1 day ago

Open

Hi, I need an experienced cabinet maker or joiner with a professional workshop setup to fabricate 5 cabinet doors and 1 side panel. This job must be completed off-site at your workshop and delivered back finished. The Design Setup (High Attention to Detail Needed): • Face & Reverse: The front laminate sheet and the back laminate sheet are different colours. • Edges: Each of the four edges on the doors/panel will feature a different colour ABS edging (e.g., matching the face, reverse, or specific accent borders). Precise attention to detail is required to ensure the correct edging goes on the correct side. What needs to be done: 1. Supply Substrate: You must supply the 16mm Moisture Resistant (MR) MDF core sheets. 2. Pick Up Materials: Collect the raw materials from my location in Seaford Vic 3. Laminate Pressing: Glue and press the laminates flat onto both sides of the 16mm MR MDF core using proper workshop pressing equipment (no air bubbles or telegraphing). 4. Precision Cutting: Cut the sheets cleanly down to the final sizes without chipping the laminate. 5. Multi-Colour Edge Banding: Apply the specific ABS edging variations to each designated border and trim flush. 6. Delivery: Drop off the 6 completed, finished pieces to my address. Approximate dimensions of finished pieces: • 5 x Doors: Roughly 60cm x 80cm each • 1 x Side Panel: Roughly 60cm x 80cm What I will provide: • 2 x Large sheets of laminate (1.8m x 3.6m each — two different colours) • All required rolls of ABS edging (in the different colours needed) What you must have/supply: • Supply of the required 16mm MR MDF sheets. • Commercial workshop setup (cold/hot press, precision panel saw, and edge-bander/trimmer). • Transport to pick up the 1.8m x 3.6m sheets and deliver the finished doors safely. Please outline your experience with custom laminate work and your estimated turnaround time in your offer. Thank you!

Sun Oct 04 2026

2 days ago

Open

I need a custom replacement bed leg made to match my existing teak bed frame. • Shape: Simple rectangular prism (rectangle block). • Timber: Tasker to source the timber. Looking for Teak, New Guinea Rosewood, or a similar heavy hardwood that can be oiled/stained to match a weathered/tarnished teak colour. • Dimensions: 210 mm H x 85 mm W x 85mm D. • Fixing: It needs to attach via an M8 thread protruding from the top. Please see the attached photo of my existing bed leg for the exact colour/tarnish and fixing type. Let me know what timber you plan to use in your offer. Pickup or drop-off can be arranged, or on-site install if you are local to Balgowlah.

Sun Oct 04 2026

3 days ago

Open

I have a timber door that i need cut to size.

Rankin Park NSW 2287, Australia

Sat Oct 03 2026

4 days ago

Open

Need some laundry cupboards built and installed, not a big area

Mon Sep 28 2026

9 days ago

Open

have a small timber stand that needs to be stripped back from its current painted finish. The top is slightly loose and may need to be hammered or tightened to make it stable. Once stripped and sanded, I’d like the timber finished in a light natural oak tone (similar to a Tassie-style oak finish).

Sun Sep 27 2026

10 days ago

Open

I like a hallway console table. I want someone to make it same but can use materials other than real wood as long as it looks same Location: Melbourne

Tue Sep 22 2026

14 days ago

Open

Looking for a cabinet maker or supplier of Laminex cabinets who can make us a panel for replacement dishwasher with Laminex finish. Will provide dims and colour if I can find someone. Unfortunately we only need the one panel, so a small order.

Burswood WA 6100, Australia

Tue Sep 22 2026

14 days ago

Open

I’m looking for an experienced cabinet maker or carpenter to supply and install custom cupboard doors across the open shelving in my walk-in pantry in Officer, VIC. I would like the pantry enclosed with hinged doors similar to the cabinet doors shown in the reference photo—preferably dark woodgrain laminate with silver handles, or the closest available match. The job should include: • Inspecting and accurately measuring the pantry • Supplying and cutting suitable cabinet doors/panels • Installing hinges, handles and any framing or supports required • Ensuring all doors are properly aligned and open and close smoothly • Providing a neat, professional finish • Removing any installation waste Please provide a quote including all materials, hardware and labour. The attached photos show the existing pantry and the preferred door style. I am flexible with the installation date. Please mention your cabinet-making experience and include photos of similar work if available.

Mon Sep 21 2026

16 days ago

Open

Browse all tasks

Last updated on 6th Oct 2026

Discover your earning potential in Newcastle

Earn money with every carpentry task

$570

per week

1-2 tasks per week

$1,425

per week

3-5 tasks per week

$1,995+

per week

5+ tasks per week

$2,468

per month

1-2 tasks per week

$6,170

per month

3-5 tasks per week

$8,638+

per month

5+ tasks per week

$29,640

per year

1-2 tasks per week

$74,100

per year

3-5 tasks per week

$103,740+

per year

5+ tasks per week

*Based on average carpentry task prices in Newcastle. Actual marketplace earnings may vary

Join Airtasker

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Newcastle

meet
Darren A
10 years on Airtasker
- Glendale NSW
4.9
Overall rating
140 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
171 tasks
meet
Ethan H
6 years on Airtasker
- Adamstown NSW
5
Overall rating
6 reviews
87.5%
Completion rate
The percentage of tasks successfully completed by the Tasker
8 tasks
meet
Anesu G
6 years on Airtasker
- Manly NSW
4.7
Overall rating
23 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
24 tasks
meet
Henk K
6 years on Airtasker
- Newcastle NSW
5
Overall rating
110 reviews
99.29%
Completion rate
The percentage of tasks successfully completed by the Tasker
140 tasks
meet
Josh N
6 years on Airtasker
- Wickham NSW
4.8
Overall rating
57 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
70 tasks
meet
Long sang C
5 years on Airtasker
- Newcastle NSW
4.9
Overall rating
52 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
56 tasks
meet
Simon L
4 years on Airtasker
- Warners Bay NSW
4.9
Overall rating
107 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
124 tasks
meet
Daniel C
1 year on Airtasker
- Cooranbong NSW
4.9
Overall rating
33 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
42 tasks