Carpentry Jobs in Central Coast

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Central Coast

Check out what tasks people want done near you right now...

accessibility fixture for 14 year old son (autistic) and not potty trained. He scot and does his things. This is an attempt to try to him get use a system. If successful can replicate to school etc. I am in Panorama SA 5041 so should be within 20-30 km away so it is possible to picked up once done Simple joinery, but the finish is the whole job. The 4 attached drawings give every dimension, the materials, the hardware and the finish spec — please read them before quoting. WHAT IT IS A plywood box 750 x 750 x 110mm high. Hinged lid with a 200 x 420mm opening cut in it. A stainless tray sits inside and lifts out for cleaning. Continuous stainless hinge along the back edge, flush keyed cam lock on the front. WHY THE FINISH MATTERS This is for a family member who will systematically test every edge, seam and fastener with his hands. The build has to give him nothing to get hold of: - Lid flush with the box on all four faces. No overhang, no rebate, no applied edging or trim. - All outside edges radiused 5-6mm. - No proud fasteners anywhere reachable — countersink, fill, sand flush. - Sealed with two-pack polyurethane inside and out, every cut edge included. - Non-slip must be grit broadcast into the top coat. No grip tape, no rubber mat on top — anything applied gets peeled off within a day. YOU SUPPLY EVERYTHING Including the stainless tray: a Gastronorm GN 1/1 food pan, 530 x 325 x 65mm deep. Standard catering item, stocked by every hospitality supplier, around $40. Materials should come in near $300. Please quote labour separately. DELIVERY Delivered assembled and fully finished. Roughly a one-day job for someone with a bench and a router. I'll check the finish on handover against the list in drawing 4. The main one: a fingernail shouldn't catch on any external edge or joint.

Tue Oct 13 2026

about 18 hours ago

Open

Need someone to build a custom cabinet. I have a design, need to be made from melamine. IKEA standard but my custom dimensions for our business in Ashfield. Need completed within the next week or two.

Tue Oct 13 2026

1 day ago

Open

Task title: Custom White Cabinet Build – Gold Coast Looking for an experienced cabinetmaker or woodworker to build a freestanding white cabinet similar to the attached photo. Specifications: * 1200 mm wide × 450 mm deep × 800 mm high * Gloss or satin white finish * Two flat, handleless doors * Open interior without a centre divider * Solid top and bottom * Moisture-resistant materials and sealed edges * Ideally an open or ventilated back The cabinet will support a heavy aquarium, so it needs to be structurally designed to safely hold at least 400 kg on top. Happy with plywood or another suitable material, as long as it looks neat and professional. Located on the northern Gold Coast. Happy to collect the finished cabinet. Please let me know your experience and what materials you’d recommend.

Mon Oct 12 2026

2 days ago

Open

Hi I’m looking for someone good with wood working to build me a watch box based on a design and list I have. I can provide a image of the way the box should be and I also have a Bunnings shopping list with measurements etc

Mon Oct 12 2026

2 days ago

Open

I’m looking for maybe a cabinet maker or carpenter to make x2 rolling under bed/under cabinet Lego storage trays. See images for examples. I can provide the measurements. These will be to roll under our tv cabinet.

Mon Oct 12 2026

2 days ago

Open

Looking for an experienced carpenter/handyman to finish the front of an existing concrete outdoor kitchen using vertical slatted Ecodeck/composite timber, based on the attached design.Pics included of current state + the design. The concrete kitchen structure is already built. The job is primarily framing, installing the slatted finish/doors and installing internal shelving. Kitchen layout: (measurements are roughly correct, not 100% - Left section is approx. 1.3m wide: slatted doors/front. Internally divide vertically into two sections. Left half remains available for existing sink plumbing; right half to have 2 horizontal storage shelves. - Middle section is approx. 0.9m wide: BBQ is above, recessed into the concrete. Below, divide into 2 sections - one for the gas bottle and one for storage with shelving. - Right section is approx. 1.4m wide: double-door outdoor fridge will occupy almost the full height + width. No slatted doors in front of the fridge - Ecodeck/slatted finish is only required around the fridge to create a neat integrated appearance. The slatted Ecodeck needs to sit in front of the existing concrete structure, rather than inside/recessed within the concrete openings. Doors need to open properly and have suitable outdoor hinges/frame/support. Important – surrounding tiles: The crazy paving is already finished, and there is currently an uneven gap between the paving and the concrete kitchen. The new Ecodeck frontage therefore needs to be installed as close/neatly to the existing paving as practical, with minimal visible gap, while still allowing the doors to open freely. Open to thoughts on existing paving and it needing to be cut to a straighter line Looking for a clean, professional finish with consistent vertical slat spacing, straight lines and neat integration with the existing concrete. Please quote for labour and advise what materials/fixings/framing you recommend. I can purchase the Ecodeck/materials once quantities are confirmed.

Berkeley Vale NSW 2261, Australia

Sat Oct 10 2026

4 days ago

Open

Custom walnut-finish drinks cabinet Looking for someone to build a drinks cabinet similar to the attached image. Size: 1,000 W × 450 D × 900 H mm, including legs. Dark walnut finish, fluted doors, brass-tone handles, and an open centre with a hanging wine-glass rack and bottle storage. Quality engineered board is fine; solid timber isn’t required. Shipping to Pakenham, VIC. Please quote materials and labour, estimated timeframe, and any delivery costs. Potential for repeat orders if the quality and pricing work wel

Fri Oct 09 2026

4 days ago

Open

We have 2 tables and 2 wall hung vanity cupboards we would like remade into wood or wood veneer. The tables will have a stone top (25mm overhang at the front and 6mm overhang either side stone snd basin already purchased). The wall hung vanities sit approximately 150mm below the table. The table legs are slightly concave at the top and taper to the floor. Dimensions Tables 1 x L1800 x w 550 x h 780 - 2 holes needed 1 x L 1400 x w 500 x h 780 - 1 hole needed Vanity cupboards 1 x L1400 x w 420 x h 300 - 2 electrical connections either end and holes for plumbing 1 x L110 x w 420 x 300 1 electrical connection on left hand side and hole for plumbing. We would like quotes. We have originals for inspection if needed. Questions welcome. Dimensions available.

Fri Oct 09 2026

5 days ago

Open

We're a cabinetry installation business based on the Gold Coast. We're looking to connect with experienced cabinetmakers and cabinetry installers interested in regular ongoing subcontract work. We have a variety of projects including kitchens, laundries, wardrobes, vanities and custom cabinetry installations. **This $10 task is for a brief introductory phone discussion** to chat about your experience, availability, rates and potential opportunities to work together. We're hoping to build relationships with reliable, experienced installers who take pride in their workmanship. If you're interested, please make an offer and briefly let us know about your installation experience. Looking forward to chatting!

Fri Oct 09 2026

5 days ago

Open

Browse all tasks

Last updated on 14th Oct 2026

Discover your earning potential in Central Coast

Earn money with every carpentry task

$600

per week

1-2 tasks per week

$1,500

per week

3-5 tasks per week

$2,100+

per week

5+ tasks per week

$2,598

per month

1-2 tasks per week

$6,495

per month

3-5 tasks per week

$9,093+

per month

5+ tasks per week

$31,200

per year

1-2 tasks per week

$78,000

per year

3-5 tasks per week

$109,200+

per year

5+ tasks per week

*Based on average carpentry task prices in Central Coast. Actual marketplace earnings may vary

Join Airtasker

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Central Coast

meet
Erfan R
9 years on Airtasker
- Eastwood NSW
4.9
Overall rating
679 reviews
99.87%
Completion rate
The percentage of tasks successfully completed by the Tasker
792 tasks
meet
Hassan E
3 years on Airtasker
- Granville NSW
4.9
Overall rating
552 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
736 tasks
meet
Samuel A
3 years on Airtasker
- Booker Bay NSW
4.8
Overall rating
37 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
46 tasks
meet
Trent B
1 year on Airtasker
- Point Clare NSW
4.9
Overall rating
53 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
65 tasks
meet
Zam A
1 year on Airtasker
- Narara NSW
5
Overall rating
189 reviews
99.54%
Completion rate
The percentage of tasks successfully completed by the Tasker
217 tasks
meet
Dean R
5 months on Airtasker
- Terrigal NSW
5
Overall rating
4 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
5 tasks
meet
Adrian M
3 months on Airtasker
- Concord NSW
5
Overall rating
25 reviews
97.56%
Completion rate
The percentage of tasks successfully completed by the Tasker
41 tasks
meet
Patrick C
2 months on Airtasker
- Terrigal NSW
5
Overall rating
30 reviews
97.37%
Completion rate
The percentage of tasks successfully completed by the Tasker
38 tasks