Cabinet Making Jobs in Blacktown

Browse through over 500 Cabinet Making Jobs.

See what you could earn

$0

per month

Based on average cabinet making task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Cabinet Making tasks in Blacktown

Check out what tasks people want done near you right now...

I need to convert the existing gas point to a bayonet and terminate it on the outside of the cabinet or same location or relocate to higher point in brick wall surface. This is in alfresco and to use with bbq.

The Ponds NSW 2769, Australia

Wed Aug 19 2026

about 3 hours ago

Open

Bathroom cabinet door broken. Need a new one to be brought in and to be installed please. Plus a tap nozzle to be replaced.

Toongabbie NSW 2146, Australia

Wed Aug 19 2026

about 7 hours ago

Open

I want to reuse my existing cabinet door rather than replace it. The existing hinge holes are damaged, so I need 2 new concealed hinge cup holes drilled in fresh positions on the same door. I already have the new DTC hinges (shown in photos). The job would include: * Drill 2 new hinge cup holes in suitable positions to fit the supplied DTC hinges * Install the new hinges * Reposition/install the corresponding mounting points inside the cabinet * Refit and align the door so it opens and closes properly Please bring your own drill, appropriate hinge/Forstner bit and any other tools required. The hinges appear to use standard 35mm cups, but please confirm the correct hole size against the supplied hinges before drilling. Photos show the existing damaged hinge holes and the replacement hinges.

Kellyville NSW 2155, Australia

Wed Aug 19 2026

about 9 hours ago

Open

Need someone to install Samsung frame 85 inch. Requirement: - Put current PP and tv plug inside the wall. - Hang samsung frame tv on the wall. - cable management - all wires to run inside the cabinet including samsung tv box There is already a powerpoint in cabinet

Nirimba Fields NSW 2763, Australia

Wed Aug 19 2026

about 9 hours ago

Open

I need two glass mirror display cabinets with LED lights

Tue Aug 18 2026

about 11 hours ago

Open

I need a 600x600x300 wall cabinet installed in my kitchen that will house a fan extractor for the stove. The old cabinet will need to be removed from the wall and the new one installed in it's place (ie; screwed into the neighboring cabinets and the wall studs behind). A hole will also need to be jigsawed out of the cabinet through the bottom (which mounts the extractor fan) and the top (for the exhaust piping). The current wall cabinet had an undermounted fan, which is why it's a bit short. The new cabinet will match the height of the surrounding cabinets. The new extractor fan needs a deeper cabinet to fit inside (installation dimensions shown, it's the bottom left one), hence the new cabinet. It will stick out from the other cabinets by 30-50mm but we won't be doing a full reno for a few years so aesthetics aren't an issue. I don't have the new cabinet yet but can get it fabricated and delivered in about a week. The steps I need done are: 1) Remove the old cabinet from the wall. 2) Cut top and bottom holes into new cabinet. 3) Install new cabinet onto the wall. 4) Install the new extractor fan. *Edit: I do not have the new cabinet yet so I cannot provide a photo of it.

Seven Hills NSW 2147, Australia

Tue Aug 18 2026

1 day ago

Open

Black exterior cabinet Insid white carcass Multiple shelves Mirror sliding door with locks LED inside around the cabinets Cabinet need to be horizontal One photo is attached as an example That is vertical cabinet Photo is for reference Dimensions will be provided

Sun Aug 16 2026

3 days ago

Open

I was wanting to get a cabinet made for my fridge recess to go above my new fridge, when it arrives. The plumber has installed a stop valve on the rear wall and my dimensions give this a 20mm clearance, so a 160mm deep cavity behind the proposed cabinet I'm after a standard white melamine cabinet (carcas) with one adjustable shelf in the middle. And the cupboard doors to be in matching Formica Velveteen Velour Finish with 162mm satin handles The dimensions are the overall external dimensions. So I don't know if you could do this, and if you could, a quote for the cost would be great. Please see attached photos. Sorry about my bad hand drawing. I'm located in Beveridge. If you can't do this, can you please recommend someone that could?

Sat Aug 15 2026

4 days ago

Open

Assemble the buffet cabinet in the photos

Mount Druitt NSW 2770, Australia

Sat Aug 15 2026

4 days ago

Open

Browse all tasks

Last updated on 19th Aug 2026

Discover your earning potential in Blacktown

Earn money with every cabinet making task

$226

per week

1-2 tasks per week

$565

per week

3-5 tasks per week

$791+

per week

5+ tasks per week

$979

per month

1-2 tasks per week

$2,446

per month

3-5 tasks per week

$3,425+

per month

5+ tasks per week

$11,752

per year

1-2 tasks per week

$29,380

per year

3-5 tasks per week

$41,132+

per year

5+ tasks per week

*Based on average cabinet making task prices in Blacktown. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Blacktown

Explore cabinet making related jobs and discover your financial opportunities

Type of cabinet making job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$390	$975	$1,365
Staining	$600	$1,500	$2,100
Kitchen Cabinet Maker	$240	$600	$840
Cabinet Making	$226	$565	$791

*Based on average cabinet making task prices in Blacktown. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Cabinet Making Taskers in Blacktown

meet
Rodrigo C
12 years on Airtasker
- St James NSW
5
Overall rating
373 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
413 tasks
meet
Shan A
10 years on Airtasker
- Merrylands NSW
5
Overall rating
52 reviews
98.48%
Completion rate
The percentage of tasks successfully completed by the Tasker
66 tasks
meet
Mauri L
7 years on Airtasker
- Willoughby NSW
4.9
Overall rating
453 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
521 tasks
meet
Dallas H
6 years on Airtasker
- The Hill NSW
5
Overall rating
14 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
16 tasks
meet
Patrick G
5 years on Airtasker
- Colyton NSW
5
Overall rating
17 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
20 tasks
meet
Huan C
4 years on Airtasker
- Epping NSW
5
Overall rating
246 reviews
99.65%
Completion rate
The percentage of tasks successfully completed by the Tasker
287 tasks
meet
Steven G
3 years on Airtasker
- Parramatta NSW
5
Overall rating
31 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
32 tasks
meet
Ali E
2 years on Airtasker
- Liverpool NSW
4.4
Overall rating
7 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
6 tasks