Driveway Repair & Installation Jobs in Ryde

Browse through over 500 Driveway Repair & Installation Jobs.

See what you could earn

$0

per month

Based on average driveway repair task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Driveway Repair tasks in Ryde

Check out what tasks people want done near you right now...

Hi, I’m looking for an experienced professional (builder / permit consultant) who can manage the entire process from start to finish for a front fence project, including permit application and construction. Project details: - Location: Chelsea Heights (Kingston Council) - Frontage length: approx. 15.6m - Fence type: 1.8m high vertical blade fence (angled/slatted design, not solid) - Includes: - 1 x pedestrian gate - 1 x manual sliding gate (driveway access) Important context: - Around 80–90% of properties on this street already have front fences - Many are close to or at 1.8m height - Looking for a design that is compliant but also maximises privacy Scope of work (must include): - Advice on feasibility under Kingston Council regulations - Full planning/building permit application (if required) - Coordination with draftsperson / engineer / surveyor (if needed) - Preparation of all drawings and documents - Liaising with council / private building surveyor - Construction and installation of the fence and gates Requirements: - Proven experience with Kingston Council permits (front fence preferred) - Ability to handle the process end-to-end (not just construction) - Please include examples of similar projects and rough timeline Happy to discuss design details, materials (e.g. monument colour), and budget once we connect.

Fri May 01 2026

about 12 hours ago

Open

Description: I’m looking for an experienced handyman or fencing contractor to repair and re-erect an existing timber fence, not replace it entirely. The fence has fallen over in sections and is leaning in others. I want to reuse as much of the existing material as possible, with some new planks added where needed. From the photos: Several fence panels have collapsed onto the ground Some posts appear loose, rotted, or detached Rails and palings are weathered but partially reusable There are missing and broken planks Fence line runs along a sloped garden area and near a path Scope of Work: Remove and sort fallen fence sections Reinstall and realign fence along original boundary Repair or replace damaged posts (likely needs re-setting into ground/concrete) Reattach existing rails and palings where possible Supply and install replacement timber planks/palings where missing or unusable Ensure fence is structurally stable and upright Minor adjustments to align with slope/terrain Clean up and dispose of any unusable debris Materials: Prefer to reuse existing timber where possible Tasker to supply additional timber and fasteners as required (please include in quote or specify separately) Requirements: Experience with fence repair (not just new installs) Own tools and transport Ability to work on slightly uneven/sloped ground Attention to making it look neat despite being a repair job Optional (mention if you want): Pressure clean or treat timber after repair Reinforce fence for better longevity Other Notes: Access available via garden path Flexible timing but prefer job done ASAP Happy to get suggestions on best way to reinforce without full replacement

Chatswood NSW, Australia

Fri May 01 2026

about 20 hours ago

Open

Apply frosted vinyl film behind existing lettering on shopfront windows — materials required. The job involves applying frosted vinyl film to the top half of shopfront windows, directly behind the existing black text. The bottom half of the windows already have frosted vinyl installed — I would like the two panels to meet seamlessly with no gap between them. I do NOT want the existing text removed or touched. The text is currently quite faint and hard to read from the street against the clear glass. I’m open to suggestions on the best way to make it stand out more without looking odd or mismatched. Must have experience with window vinyl/signage. *Please only apply if you have done similar work before. All materials including vinyl must be supplied by you (please factor this into your quote.) Job needs to be asap so please only apply if you are available promptly! :) Located at Homebush NSW 2140.

Homebush West NSW 2140, Australia

Thu Apr 30 2026

1 day ago

Open

I’m building a camper van fit-out and already have all the timber materials ready. I need someone with the right tools/workshop to cut the timber into panels/components based on my measurements. What I need: Accurate cutting of timber panels (plywood etc.) Straight, clean cuts (important for fitting inside van) Ability to follow measurements or simple drawings I’ll provide Potentially a few angled or custom cuts depending on layout Materials: All timber supplied by me Tools required (you bring): Table saw / circular saw / track saw (whatever you use for clean, precise cuts) Your own workspace preferred Ideal person: Experience with cabinetry, carpentry, or van fit-outs Attention to detail (this is for a tight-fitting interior build) Location: I can drop materials off and collect once done (Sydney-based) Optional (nice to have): Ability to advise on best way to cut/assemble certain sections

Wed Apr 29 2026

3 days ago

Open

Hi, We have 10kW of solar panels and the wiring (we don’t need the inverter) that need to be taken down from a roof, then transport to Laguna (1 hour 45 minute drive with the last 10 minutes on a dirt road) and installed on a single story tin roof. Please see a photo of some of the panels to remove (the rest are on the flat bit of the roof at the back). Thanks

Macquarie Park NSW, Australia

Mon Apr 27 2026

5 days ago

Open

I can drop the bike to you, if your are with in a short drive, I'm in Sydney NSW, Bike is fully apart, motor Needs NSW piston and rings (I have all parts, just needs to be built) I no longer have a garage to do so.

Mon Apr 27 2026

5 days ago

Open

I am seeking an experienced technician, engineer, or electronics hobbyist to design and/or build a custom hand-operated throttle control for a 2024 CFMOTO UForce 600 UTV. Due to mobility issues, I cannot use the factory foot pedal very well. The Technical Challenge: The UTV uses a 6-wire, dual-output Hall Effect sensor. A standard 3-wire conversion will trigger 'Limp Mode.' The system requires: Redundant signals (0.5V–4.5V range). IP67/IP68S rating for farm use. A robust, industrial-grade thumbwheel (e.g., OTTO HTW or APEM TW series). Scope of Work (Flexible): Complete Build: Source components, build a pigtail harness for the factory connector, and ensure ECU integration. Design Only: Provide a detailed schematic and parts list that I can hand to my local auto-electrician. What I Have: I have identified suitable industrial parts. I have a spare factory pedal assembly for connector matching/testing. Who You Are: You must have a background in industrial automation or custom vehicle electronics. Please do not apply if you only perform standard automotive work; this requires expertise in dual-channel sensor logic and electronic safety. Please outline your experience with similar systems and your proposed approach. I am happy to discuss an hourly rate or a fixed project fee.

Sat Apr 25 2026

7 days ago

Open

Hi, I need some more power points in my garage. It needs to be enough points to power 2x ebike chargers and a freezer, and maybe one spare. I’ve attached photos of where the current points are, and where I’d like the new ones. On the other side of the wall is the neighbours house (this is a duplex). Let me know if you think this is possible. Obviously I can move everything out of the way as well.

Dundas NSW 2117, Australia

Tue Apr 21 2026

11 days ago

Open

Seeking a AQF Level 5 arborist to prepare a report to Ryde council regarding a drive way being proposed to be constructed in between to trees located on the footpath verge to ensure the root systems are protected from the drive ways construction .

West Ryde NSW 2114, Australia

Mon Apr 20 2026

12 days ago

Open

Browse all tasks

Last updated on 1st May 2026

Discover your earning potential in Ryde

Earn money with every driveway repair task

$700

per week

1-2 tasks per week

$1,750

per week

3-5 tasks per week

$2,450+

per week

5+ tasks per week

$3,031

per month

1-2 tasks per week

$7,578

per month

3-5 tasks per week

$10,609+

per month

5+ tasks per week

$36,400

per year

1-2 tasks per week

$91,000

per year

3-5 tasks per week

$127,400+

per year

5+ tasks per week

*Based on average driveway repair task prices in Ryde. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Ryde

Explore driveway repair related jobs and discover your financial opportunities

Type of driveway repair job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Building & Construction	$640	$1,600	$2,240
Shed Installation	$660	$1,650	$2,310
Pergola Installation	$532	$1,330	$1,862
Driveway Repair	$700	$1,750	$2,450

*Based on average driveway repair task prices in Ryde. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Driveway Repair Taskers in Ryde

meet
Jean-paul (jp) N
10 years on Airtasker
- Marrickville NSW
4.7
Overall rating
84 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
94 tasks
meet
Ahmad S
10 years on Airtasker
- West Pennant Hills NSW
5
Overall rating
799 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
869 tasks
meet
Bradley B
6 years on Airtasker
- St Leonards NSW
5
Overall rating
91 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
101 tasks
meet
Laith H
6 years on Airtasker
- Botany NSW
4.9
Overall rating
721 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
833 tasks
meet
Jone T
5 years on Airtasker
- Blacktown NSW
4.9
Overall rating
66 reviews
98.63%
Completion rate
The percentage of tasks successfully completed by the Tasker
73 tasks
meet
Doug P
4 years on Airtasker
- Five Dock NSW
4.8
Overall rating
36 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
39 tasks
meet
Mathew G
2 years on Airtasker
- Winston Hills NSW
4.9
Overall rating
151 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
186 tasks
meet
Jimmy L
3 months on Airtasker
- Glenmore Park NSW
5
Overall rating
42 reviews
98.11%
Completion rate
The percentage of tasks successfully completed by the Tasker
53 tasks