Find local deck sanding experts in VIC

Scope of work: • Inspect deck boards for any damage, warping, or loose/rotting sections and repair or replace as needed • Sand back the existing deck to remove old, weathered coating and grey/faded patches • Clean deck thoroughly (remove debris, moss, stains) • Apply a fresh coat of deck stain/paint in a matching or similar timber tone (happy to discuss colour options) • Check and tighten any loose screws/fixings, and inspect the deck edging/framing for stability Deck details: • Approx. size: roughly 9m x 3.7m (irregular shape, covers a patio and open deck area) • Attached to house, partially covered by a pergola section Looking for: • Someone with deck restoration/carpentry experience • Please include photos of previous deck work in your offer • Flexible on timing — weekday or weekend works Please quote based on the photos attached and let me know if you’d like to do a site visit first for an accurate quote.

Need deck sanding and oiling. Please see photos for the area Need it done on Wednesday or Thursday next week. The weather looks good on those days

Water based stain removal/sanding and natural oil stain application

Need our back deck briefly sanded (maybe not) but stained with new polish for open home. Is 4870mm by 3000mm (approx 5m by 3m)

Hi everyone, I am looking for an experienced floor specialist to sand a section of an outdoor timber deck in Ringwood (approx. 15 sqm). Job Details: Scope of work: Sanding the deck back to raw timber. No oiling, staining, installation, or repairs required. Deck Condition: Please see attached photos. Requirements: You must have your own professional sanding equipment and dust extraction. Easy access and power are available on site. Ongoing Work Opportunity: I work on various property projects around Melbourne and I'm looking for a reliable tradie I can trust for ongoing work. If you do a great job on this deck, I have plenty of future sites for you. When making an offer, please include: Confirmation that you can complete this 15 sqm sanding task for the $300 budget. A few photos of your recent deck sanding work (if possible). Cheers, Tim

Deck to be sanded, see photo

25sqm In Brunswick green or similar colour Budget excludes material cost

Need my backyard Decking to be sand and oil.

Light sanding of about 20sq m outdoor deck which has been partially chemical stripped there is outdoor power point in middle of deck

Looking for an experienced person to sand and re-stain my Merbau deck, Requires surface prep ie. tightening any loose nails, proper timber cleaning, sanding to smooth the surface and apply 2 coats

Need someone with a belt sander to sand back my deck. Pretty small area - approx 8m2. Spotted gum. Start with 60 grit and work up to 120grit. All screws sufficiently inset. Giving my kids splinters! Don’t want to stain or oil.

Need front and back deck sanded and polished

Deck timber needs to be sanded and sealed. Alfersco decking Need all work done and material supplied Stairs Front face Pool equipment frame Family room deck Lower deck Some decking is new Some is old with paint on it

I have a deck that needed to be sanded down.

Looking for an experienced person to sand and re-stain my small Merbau deck, steps and 3 privacy screens. Requires surface prep ie. tightening any loose nails, identify if any boards need replacing, pressure wash/clean as well as sanding and re-staining. Deck - 3 x 3.8m Two Steps - 6.1 m long Privacy screen - 1.9 x 2.4m (both sides) Two Screens 0.7 x 2m (both sides, 1st floor roof easy access) Thanks Shelley

Sanding our outdoor deck - approximately 25sqm

6x6 deck in great condition. Stain annually along with outdoor table. Contractor has retired and looking for a regular partner to continue the service I paid $1200 historically

Professional sand and stain of a 7x3 sq m Merbau deck in Point Cook Someone who has experience working on timber decking needed. A couple of lose planks that may need fresh screws too Photos attached

Sand deck, pergola and wooden doors plus stain. Picture below from construction, can’t find finished pictures. Additional pictures added to assist with quotes. Update: Original photo for reference + current condition photos to show wear Front deck: approx 5m x 1.2m, light sand and stain Back deck: approx 5m x 2.5m, light sand and stain Back doors: sand and stain Back pergola: approx 3m tall, light sand and stain of rafters, stain only of shade slats

Looking for an experienced timber finisher to sand and oil a large hardwood deck at a modern home. Requirements: Random orbital sanding only. No drum or belt sanders, Wash/prep with deck cleaner after sanding, Apply Cutek Extreme CD50 penetrating oil with Colourtone “Smokey Grey” (or “Silvered Ash”) Goal is a natural silvered timber You must have Experience using Cutek products. Attention to detail with timber finishing I will supply the product if needed.