Find local deck sanding experts in QLD

Decking floor requires sanding back - 6.2m x 4.2m. Bli Bli

Needed the deck sanded and coated.. can purchase products for coating but do not have the sanding equipment.

We have a 4x10m deck that needs sanding and sealing. About 1/4 of the decking is new- the rest is existing. This service is for you to come and see the job and provide an accurate quote

Mowboo timber deck sanded and oiled size 5.5 x2 meter

I have timber deck I want sanded and oiled Marbow timber size 5.5 meter buy 2 meter

Front deck needs sanding and painting

Need the back deck sanded and stained

43m2 deck to lightly sand and oil Must bring sanding equipment Oil and brush supplied Open to offers

Deck sand and stain Broadbeach

I need to get my Queenslander balcony sand & oiled

Sand back deck on QLDer. Large wraparound veranda style. Appx 300sqm Existing wood is Merbau want to take it back to the natural colour. Natural oil applied on the top. Some pairing work available too.

Sand small outdoor deck and restain

Old deck needs to be sanded back for resealing (do not need you to do the sealing). Deck is 35 square metres.

Need to sand back the deck 4m x9m and the handrails. You need to have the correct equipment to do the task. The brown horizontal handrails and the brown vertical rails need sanding to. Please look at the picture to get a better understanding of job.

Sand new deck prior to oiling. Approximately 30 sq metres.

126 Sq Mtrs of rough sanding then fine sanding on timber decks and 5 step treads 4 Sq Mtrs of fine sanding and clean up over 26 step treads 13 Sq Mtrs (approx) of hole punching. 100mm wide timber boards with nails at 450mm centers

We have a hardwood deck approx 40 sq m with 3 stairs built in. Need deck and stairs sanded and 3 coats of sikkens deck oil applied - Please do not respond if you plan on doing less than 3 coats, as we will review work between each coat. It is rectangular with walls/ glass fencing around so will need a detail sander as well as deck sander.

I need a 5 x 5 meter DECK send it so I could apply Sealer

Sand, fill & oil timber deck (36m²) Looking for an experienced deck sander/finisher to sand back, fill gaps/cracks where needed, and apply 2–3 coats of a high-quality oil/stain to merbau colour (e.g. Intergrain, Feast Watson, Sikkens or equivalent). Deck is ~36m², wide hardwood boards (solid Aussie timber). Please include: • Equipment (proper floor/deck sander, not handheld only) • Product you recommend/use

Back deck: Large deck that was refurbished about a year ago. It needs a re-varnish to maintain the finish and address some minor water damage. Front deck: Smaller deck at the front of the house. It’s quite worn and needs a thorough refresh and re-varnish.