Find local deck sanding experts in NSW

4x4m deck sanded and varnished including steps (will provide varnish) , narrow boards , also want the pergola and bench seat painted white, (will provide the paint as well

Remove items of furniture from deck (2 x lounges, dining table, cabinets, fridge, barbecue) Lightly sand deck Apply 2 coats of stain/sealant (to be provided) Area circa 9m x 5m

I need my deck sanded around my pool as there are splinters coming through. After the sanding, it needs to be oiled a few times and protected from the sun. The oil around the pool needs to be somewhat of a scotchguard to protect it from water (wood swelling). There may be a dozen screws that need replacing to hold the boards in place as well.

The deck around our small pool needs to be sanded back in preparation for oiling. The last person who 'oiled' the deck painted it instead, so it needs to be stripped right back. Our deck is is approx. 1-1.5m around the sides of the pool and the front of the deck is 0.5-1m high. The deck has recently been modified to replace the pool liner so there are a few extra planks if wood (see 2nd pic) that also need sanding. Depending on costs we may decide do the oiling part ourselves.

Need a deck sanded and lackered

I need two sets of stairs and a deck landing sanded. They need to be finished ready to be oiled. Wood is blackbutt. 1 set of treads has 13 stairs, and one set has 10 treads, plus a small landing about 1m x 1m

Need outdoor deck sanding and polishing done

Need to sand only. Decking around 50 sqm

Need deck sanded then washed with oxalic acid

Sand and oil a small outdoor deck

Some one to sand 3 outdoor timber sexks

sanding & staining deck around 50sqm moving of furniture as well i have no idea on budget right now. waiting to see what quotes come in at

Deck sand and oil approx 30 m2

Timber deck approx 3 x 7m with steps. Deck was never sealed. Part has been pressure washed and has fibre lift. I need the entire deck sanded evenly (including steps) to remove furring and even out colour. Timber is likely tallowwood or similar and had a pink undertone when new. I want a very light, neutral oil finish to keep it pale and blonde (similar to European oak look). Looking for a neutralising oil system (eg Cutek Extreme with White tone or equivalent). No dark stains, no warm/amber oils, no paint. Please quote including sanding, prep and oil application.

Sand back decking wood including side panels, oil 2 coats. Oil provided. All other equipment to be supplied by tasker.

Looking to get quotes to have our deck re-stained. Refer to pictures attached. It was last stained about a year ago. Approx. size 5.5m x 5m. - apply sanding where necessary - pressure wash clean - apply 2-3 coats of stain (stain provided) Must have own equipment and experience with decking. Should not be rushed with some gap in between coats.

We are seeking to have our back deck sanded by an experienced person with the necessary equipment, in preparation for washing/oiling (which we will take care of). Deck is spotted gum and 6-7 years old, never been sanded. Two levels with one step in between. Upper level: 5.5m x 3.5m (19 sqm) plus side entry (2.5m x 1m). Lower level: 3.5m x 2.5m (8.75 sqm). Plus edges. Step is 34cm (W) x 57cm (L). We will remove all plants and furniture off the deck except for a heavy chest and bench seat we’ll need a hand with moving. Condition of timber varies, some parts have been covered by furniture so in good condition, while other parts are weathered and/or affected by damp and will need more attention. Please see pics. We expect it shouldn’t take more than one day. Suitable days are limited to: Wed 31 Dec, Thur 1 Jan, Fri 2 Jan, Sat 3 Jan, Mon 5 Jan, Tue 6 Jan, or Wed 7 Jan.

Prepare timber Sand deck - approx 2 x 4.5m Oil deck Clean up

I’ve got a deck made of Blackbutt roughly 30sqm that needs a light sanding in preparation for me to restain

Looking for someone to sand our hard wood deck 23 square metres in size