Carpentry Jobs in Gungahlin

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Gungahlin

Check out what tasks people want done near you right now...

I’m looking for experienced cabinet maker to make a room for Dryer next to washing machine. Remove the left cabinet , Shift/Cut the right cabinet about 10 cm

Gungahlin ACT 2912, Australia

Sun Oct 11 2026

about 9 hours ago

Open

need a handyman or cabinetmaker to repair a kitchen drawer that is not closing fully. The drawer has a Harn drawer runner system with a built-in cutlery tray. The drawer opens normally but does not close completely, leaving a noticeable gap between the drawer front and the cabinet. Work required: * Inspect the existing drawer runners and alignment. * Identify why the drawer is not closing fully. * Adjust or repair the runners and drawer mechanism. * Replace faulty runner components if necessary. * Ensure the drawer closes smoothly and sits flush with the other cabinet drawers. I have attached photos showing the drawer and the issue. Prefer to repair the existing mechanism rather than replace the entire drawer. Please provide an estimated cost for the repair, including any replacement parts if required.

Harrison ACT 2914, Australia

Sat Oct 10 2026

about 15 hours ago

Open

Custom walnut-finish drinks cabinet Looking for someone to build a drinks cabinet similar to the attached image. Size: 1,000 W × 450 D × 900 H mm, including legs. Dark walnut finish, fluted doors, brass-tone handles, and an open centre with a hanging wine-glass rack and bottle storage. Quality engineered board is fine; solid timber isn’t required. Shipping to Pakenham, VIC. Please quote materials and labour, estimated timeframe, and any delivery costs. Potential for repeat orders if the quality and pricing work wel

Fri Oct 09 2026

1 day ago

Open

We have 2 tables and 2 wall hung vanity cupboards we would like remade into wood or wood veneer. The tables will have a stone top (25mm overhang at the front and 6mm overhang either side stone snd basin already purchased). The wall hung vanities sit approximately 150mm below the table. The table legs are slightly concave at the top and taper to the floor. Dimensions Tables 1 x L1800 x w 550 x h 780 - 2 holes needed 1 x L 1400 x w 500 x h 780 - 1 hole needed Vanity cupboards 1 x L1400 x w 420 x h 300 - 2 electrical connections either end and holes for plumbing 1 x L110 x w 420 x 300 1 electrical connection on left hand side and hole for plumbing. We would like quotes. We have originals for inspection if needed. Questions welcome. Dimensions available.

Fri Oct 09 2026

2 days ago

Open

We're a cabinetry installation business based on the Gold Coast. We're looking to connect with experienced cabinetmakers and cabinetry installers interested in regular ongoing subcontract work. We have a variety of projects including kitchens, laundries, wardrobes, vanities and custom cabinetry installations. **This $10 task is for a brief introductory phone discussion** to chat about your experience, availability, rates and potential opportunities to work together. We're hoping to build relationships with reliable, experienced installers who take pride in their workmanship. If you're interested, please make an offer and briefly let us know about your installation experience. Looking forward to chatting!

Fri Oct 09 2026

2 days ago

Open

Create 3 wooden box as a cover for sunscreen lotion bottle. Please see photos for measurement and idea. Wood and supplies to be supplied by tasker.

Thu Oct 08 2026

3 days ago

Open

Hi, I need an experienced cabinet maker or joiner with a professional workshop setup to fabricate 5 cabinet doors and 1 side panel. This job must be completed off-site at your workshop and delivered back finished. The Design Setup (High Attention to Detail Needed): • Face & Reverse: The front laminate sheet and the back laminate sheet are different colours. • Edges: Each of the four edges on the doors/panel will feature a different colour ABS edging (e.g., matching the face, reverse, or specific accent borders). Precise attention to detail is required to ensure the correct edging goes on the correct side. What needs to be done: 1. Supply Substrate: You must supply the 16mm Moisture Resistant (MR) MDF core sheets. 2. Pick Up Materials: Collect the raw materials from my location in Seaford Vic 3. Laminate Pressing: Glue and press the laminates flat onto both sides of the 16mm MR MDF core using proper workshop pressing equipment (no air bubbles or telegraphing). 4. Precision Cutting: Cut the sheets cleanly down to the final sizes without chipping the laminate. 5. Multi-Colour Edge Banding: Apply the specific ABS edging variations to each designated border and trim flush. 6. Delivery: Drop off the 6 completed, finished pieces to my address. Approximate dimensions of finished pieces: • 5 x Doors: Roughly 60cm x 80cm each • 1 x Side Panel: Roughly 60cm x 80cm What I will provide: • 2 x Large sheets of laminate (1.8m x 3.6m each — two different colours) • All required rolls of ABS edging (in the different colours needed) What you must have/supply: • Supply of the required 16mm MR MDF sheets. • Commercial workshop setup (cold/hot press, precision panel saw, and edge-bander/trimmer). • Transport to pick up the 1.8m x 3.6m sheets and deliver the finished doors safely. Please outline your experience with custom laminate work and your estimated turnaround time in your offer. Thank you!

Sun Oct 04 2026

7 days ago

Open

I need a custom replacement bed leg made to match my existing teak bed frame. • Shape: Simple rectangular prism (rectangle block). • Timber: Tasker to source the timber. Looking for Teak, New Guinea Rosewood, or a similar heavy hardwood that can be oiled/stained to match a weathered/tarnished teak colour. • Dimensions: 210 mm H x 85 mm W x 85mm D. • Fixing: It needs to attach via an M8 thread protruding from the top. Please see the attached photo of my existing bed leg for the exact colour/tarnish and fixing type. Let me know what timber you plan to use in your offer. Pickup or drop-off can be arranged, or on-site install if you are local to Balgowlah.

Sun Oct 04 2026

7 days ago

Open

Need some laundry cupboards built and installed, not a big area

Mon Sep 28 2026

13 days ago

Open

Browse all tasks

Last updated on 11th Oct 2026

Discover your earning potential in Gungahlin

Earn money with every carpentry task

$458

per week

1-2 tasks per week

$1,145

per week

3-5 tasks per week

$1,603+

per week

5+ tasks per week

$1,983

per month

1-2 tasks per week

$4,958

per month

3-5 tasks per week

$6,941+

per month

5+ tasks per week

$23,816

per year

1-2 tasks per week

$59,540

per year

3-5 tasks per week

$83,356+

per year

5+ tasks per week

*Based on average carpentry task prices in Gungahlin. Actual marketplace earnings may vary

Join Airtasker

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Gungahlin

meet
Parth P
2 years on Airtasker
- Amaroo ACT
4.8
Overall rating
28 reviews
95.74%
Completion rate
The percentage of tasks successfully completed by the Tasker
47 tasks
meet
Sam S
7 years on Airtasker
- Harrison ACT
4.8
Overall rating
25 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
45 tasks
meet
Daisy G
9 years on Airtasker
- Kingston ACT
4.9
Overall rating
2443 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
2921 tasks
meet
Matt S
12 years on Airtasker
- Tuggeranong ACT
5
Overall rating
31 reviews
97.5%
Completion rate
The percentage of tasks successfully completed by the Tasker
40 tasks
meet
Saima S
3 years on Airtasker
- Belconnen ACT
4.9
Overall rating
202 reviews
99.61%
Completion rate
The percentage of tasks successfully completed by the Tasker
258 tasks
meet
Siba D
3 years on Airtasker
- Canberra Central ACT
4
Overall rating
110 reviews
99.36%
Completion rate
The percentage of tasks successfully completed by the Tasker
157 tasks
meet
Chad P
9 years on Airtasker
- Gungahlin ACT
5
Overall rating
186 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
207 tasks
meet
Willy W
10 years on Airtasker
- Woden Valley ACT
4.9
Overall rating
691 reviews
99.88%
Completion rate
The percentage of tasks successfully completed by the Tasker
802 tasks