Cabinet Making Jobs in Blacktown

Browse through over 500 Cabinet Making Jobs.

See what you could earn

$0

per month

Based on average cabinet making task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Cabinet Making tasks in Blacktown

Check out what tasks people want done near you right now...

Raise the cabinet’s bottom panel by 9 cm so the opening below increases from 180 cm to 189 cm. Rebuild and secure the bottom panel properly. Here is more detailed recommendation: Final fridge opening: 189 cm Cabinet width: 97 cm Existing cabinet height: 45 cm New cabinet height: 36 cm Total reduction: 9 cm Cabinet doors Do not remove 9 cm from the bottom of the doors. The bottom cut would pass through the handle holes and change the handle-to-bottom spacing compared with the other kitchen cabinets. Instead: Remove 9 cm from the top edge of each door. Keep the original bottom edge and handle holes unchanged. Reinstall the shortened doors 9 cm higher. Drill a new upper hinge-cup hole near the new top edge. Keep the existing lower hinge hole where possible. Reposition the cabinet-side hinge mounting plates to align with the doors. Apply matching edge banding or finish to the newly cut top edges. CURRENT DOOR — 45 cm NEW DOOR — 36 cm Important: Shorten both cabinet doors by removing 9 cm from the top, not the bottom. The existing handle holes and bottom edges must remain unchanged so the handle-to-bottom spacing stays consistent with the other kitchen cabinets. Drill new upper hinge holes and reposition the hinge. The 9 cm top cut may pass through the middle of the existing upper hinge cup hole. This could leave a half-open hinge hole or gap at the new top edge, needs to be repaired properly. Hoping we won't need new doors

Toongabbie, New South Wales

Mon Jul 27 2026

about 2 hours ago

Open

My new address is Arthur St, Parramatta 2150

Kings Langley NSW 2147, Australia

Mon Jul 27 2026

about 11 hours ago

Open

I am looking for someone for who can build a cabinet for the wardrobes. Require for 2 wardrobes.

Dean Park NSW 2761, Australia

Mon Jul 27 2026

about 13 hours ago

Open

Please provide an estimation for below- a. 1 study room door, wall opening length and height- 1.5 m x 2.8 m. b. One foldable study desk top only- length 1.5 m c. 4 small cupboards for study wall. d. 1 long cabinet for study 2 m long and 0.4 m wide and deep.

Kellyville, New South Wales

Mon Jul 27 2026

about 15 hours ago

Open

outdoor storage cabinet, built in durable waterproof material(timber is possible but needs to be varnished and prearranged) Specifics: 120H x 45D x 80L

Sun Jul 26 2026

1 day ago

Open

I have a bathroom mirror i want to put together and and shoe cabinet to be built

Shalvey NSW 2770, Australia

Sun Jul 26 2026

1 day ago

Open

Media cabinet wall and office desk

Lalor Park NSW 2147, Australia

Sat Jul 25 2026

2 days ago

Open

I’m looking for an experienced cabinet maker to supply and install two custom cabinets at my home in Kellyville, NSW. The job includes: 1. Hall TV / Storage Unit * Approx. 2950mm wide * White melamine interior * White and Dusky Elm exterior * TV recess with shelves and drawers * Custom built to the attached design 2. Kitchen Fridge Cabinet * Approx. 1460mm wide * Space for a 950mm fridge * White melamine finish * Overhead cupboard and pantry shelving * Custom built to the attached design Requirements * Supply and installation included * Quality 16mm melamine (or equivalent) * Soft-close hinges and drawer runners * Professional finish * Fully insured and experienced cabinet maker * Please include photos of similar work and your warranty details. I have detailed drawings and dimensions ready to share with shortlisted tradies. I’m looking for quality workmanship at a competitive price. Location Kellyville, NSW

Kellyville NSW 2155, Australia

Sat Jul 25 2026

2 days ago

Open

I'm looking for a cabinetmaker, joiner or custom-furniture maker to design and build a low open shelving unit to sit behind a freestanding sofa in my apartment in Erskineville. The piece will act as a room divider and display shelf. It should resemble a vintage Danish/mid-century teak low bookcase, with open asymmetrical compartments similar to the attached references. Approximate dimensions: - 1950mm wide - 300mm deep - 570mm high Design requirements: - Open shelving visible and accessible from both sides - No doors, drawers or back panel - Mix of differently sized rectangular and square compartments - Space for coffee-table books, records, candles and decorative objects - Straight architectural outer frame - No visible legs - Warm teak or walnut appearance to complement an existing vintage teak cabinet - Matte or low-sheen finish - All faces, edges and internal surfaces must be properly finished, as the unit will be visible from both rooms Curved appearance created using CNC-cut or router-cut flat panels; no bent lamination required. We have a young toddler, so stability is important. Because the unit will not sit against a wall, is it possible to have the base solid. I'm thinking a high-quality prefinished walnut-look furniture board. Budget is flexible depending on material and construction proposal. I’m happy to simplify the curved details to keep it affordable.

Fri Jul 24 2026

4 days ago

Open

Browse all tasks

Last updated on 27th Jul 2026

Discover your earning potential in Blacktown

Earn money with every cabinet making task

$226

per week

1-2 tasks per week

$565

per week

3-5 tasks per week

$791+

per week

5+ tasks per week

$979

per month

1-2 tasks per week

$2,446

per month

3-5 tasks per week

$3,425+

per month

5+ tasks per week

$11,752

per year

1-2 tasks per week

$29,380

per year

3-5 tasks per week

$41,132+

per year

5+ tasks per week

*Based on average cabinet making task prices in Blacktown. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Blacktown

Explore cabinet making related jobs and discover your financial opportunities

Type of cabinet making job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$370	$925	$1,295
Staining	$600	$1,500	$2,100
Kitchen Cabinet Maker	$240	$600	$840
Cabinet Making	$226	$565	$791

*Based on average cabinet making task prices in Blacktown. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Cabinet Making Taskers in Blacktown

meet
Steven G
3 years on Airtasker
- Parramatta NSW
5
Overall rating
31 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
32 tasks
meet
Shan A
10 years on Airtasker
- Merrylands NSW
5
Overall rating
52 reviews
98.48%
Completion rate
The percentage of tasks successfully completed by the Tasker
66 tasks
meet
Huan C
3 years on Airtasker
- Epping NSW
5
Overall rating
246 reviews
99.3%
Completion rate
The percentage of tasks successfully completed by the Tasker
285 tasks
meet
Mauri L
7 years on Airtasker
- Willoughby NSW
4.9
Overall rating
450 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
516 tasks
meet
Rodrigo C
12 years on Airtasker
- St James NSW
5
Overall rating
366 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
407 tasks
meet
Patrick G
5 years on Airtasker
- Colyton NSW
5
Overall rating
17 reviews
95.24%
Completion rate
The percentage of tasks successfully completed by the Tasker
21 tasks
meet
Ali E
2 years on Airtasker
- Liverpool NSW
4.4
Overall rating
7 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
6 tasks
meet
Dallas H
6 years on Airtasker
- The Hill NSW
5
Overall rating
14 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
16 tasks