Open

Assigned

Completed

Hardwire Dash Cam & External Battery Pack into 2025 Hyundai IONIQ 5

Posted by

Kilian A.

Location

Kingston Upon Thames, Greater London, KT1 1

To be done on

Flexible

Hardwire Dash Cam & External Battery Pack into 2025 Hyundai IONIQ 5

£120

Details

Looking for an experienced auto-electrician or mobile dash cam installer to professionally fit and hardwire a 3-channel Vantrue N4 Pro S dash cam paired with a Cellink NEO 80+S external LiFePO4 battery pack into a 2025 Hyundai IONIQ 5 N Line S (84kWh AWD) Scope of Work: 1. Mount Front/Cabin & Rear Cameras: Fit the main front + interior cabin camera unit neatly behind the rear-view mirror housing on the windscreen (with the supplied CPL polarising filter attached). Route the rear camera cable cleanly through the headliner/pillar trim and rear tailgate grommet (avoiding all curtain airbags) and mount the rear camera centrally on the rear hatch glass. 2. Install & Wire the External Battery Pack (Zero 12V Standby Drain): Secure the Cellink NEO 80+S battery pack using the supplied Velcro strips. Wire the Cellink's Vehicle Hardwire Charging Cable into an ignition-switched (ACC) Micro2 fuse slot in the IONIQ 5's interior fuse box (with a proper chassis ground), ensuring the pack charges only when the vehicle is switched on and draws 0.0A from the car's 12V battery when parked. 3. Connect Dash Cam Hardwire Kit to the Battery Pack: Route the Vantrue VP03 3-wire hardwire kit cleanly down the A-pillar to the passenger seat and splice its B+, ACC, and GND leads directly onto the Cellink NEO 80+S's 3-wire output pigtail (do not wire the camera directly to the car's fuse box). Configure & Test: Insert and format the 512GB microSD card, pair the Bluetooth remote button, verify all 3 video feeds (front, cabin, rear), and confirm the camera automatically switches into Parking Mode when the car is turned off and back to normal recording when powered on.

0 new tasks
To see more tasks
or