Hi there. Item is a Rebo Challenge Wooden Climbing Frame with Swings, Slide and Up & over Climbing wall - Bear https://www.outdoortoys.com/products/rebo-challenge-wooden-climbing-frame-with-swings-slide-and-up-over-climbing-wall-bear To guide on the task... Aim November build The Rebo Challenge Wooden Climbing Frame (Bear model) typically takes 6 to 8 hours to assemble with 2 capable adults working together. In real-world DIY settings, builds often stretch to 8 to 10 hours depending on tool setup, ground levelness, and sorting hardware. Plan for a full weekend day or two half-days to complete it safely without rushing. What to Expect During Assembly Two adults are required: Many stages (raising the main tower uprights, attaching the swing arm, and manoeuvring the "up and over" climbing wall) require one person to hold components steady while the other fastens hardware. Key Tools You'll Need Before Starting Electric Drill & Driver Bits: Crucial for drilling pilot holes and driving large timber screws. Socket Wrench Set & Adjustable Spanner: For tightening main frame bolts. Spirit Level & Tape Measure: To ensure the tower and swing beam posts are plumb and level. Hand Clamps: Extremely helpful for holding timber joints square before drilling. Hammer / Rubber Mallet: Useful for tapping bolts through pre-drilled holes. (From supplier) Please Note: Tools are required in the assembly of this item including a drill. The wood is not pre-drilled but full instructions are provided. You will also be required to cut canvas to size for roof as part of the assembly. Looking for someone with prior experience putting together outdoor wooden play equipment (please mention this in your offer). Free parking on site. I've added images of the flat pack items and the assembled unit from manufacturer