Find a professional internal door contractor near you

I am replacing 5 internal doors to my beach house with new ones. The doors are close in size. But need to be planed and hinges attached and hung. I am here today hoping someone can help me.

I need to replace an internal door and it is not a standard size. Size of door is 813 x 2017 x 35 mm so was hoping it was possible to get a standard door cut to size and installed. Thanks

I want to install new doors in my hall. There are two frames which needs doors installation. Please send me your quotes for the same.

Replace 7 existing internal doors with new doors (materials inc door, hinge, handle provided).

door handle to garage is falling off due to screws used to fasten the handle to the locking mechanism are too short, barley into the thread. Bathroom and one bedroom Door stoppers are falling off.

We need to install six new solid internal doors in an apartment. The doors require holes for handles and prep for the hinges. I can help with the installation, etc. Two doors need to be trimmed/shorten by 1:2 cm.

The internal door shown in this picture opens into a small room. As a result it means we can’t place things in that room. I would like it adjusted so it opens the other way (outwards rather than inwards). We’ll need to add a handle. Currently there is only a handle on the inside. Looking from outside, I’d like the hinge on the left, handle on the right. The door frame is slightly shorter on the outside (due to a step) so we will need about 20cm cutting off the bottom.

We need a bedroom door hung. Will need to remove old door and replace with new, will likely need some planing as door frame slightly sloped due to old house!

I need to take 20mm off the bottom of two internal solid wood doors. Bottom of doors will need to be cut, sanded, painted and rehung on hinges. I also need to drill in two ring security products onto walls. One will require a masonry attachment for a drill.

3 of the doors are not locking. One is a garage door leading to backyard. Second is a bedroom and the third is a bathroom.

I need a few different "handyman" jobs done. I've bundled them together to hopefully make it more worthwhile for someone to do. Hoping I can get one person to do all, otherwise I will separate the task into separate, smaller tasks. Job list: Hang internal door - standard internal door to be hung. All corners appear to be square so no resizing required. Door not yet purchased, but planning on just getting something like this: https://www.bunnings.com.au/hume-2040-x-820-x-35mm-internal-door-oak-oakfield-hc2_p1972989. Fix wall cracks - A roof leak has created a few large cracks in the old plaster (refer to pictures). There are 4 "large" cracks and a few minor ones. I would like to have them filled/sanded etc. Internal painting touch ups - 6 curtain covers removed leaving gaps in the paint around 6 windows (2 x 20cm patches on each window). I would like these to be re-painted. I haven't bought the paint yet, but will do that. Bathtub touch up - Bathtub was pained with Rust-Oleum Tub And Tile Refinishing Kit. One of the edges has started peeling, but 90% of tub is fine. I would like the edge to be "re-finished" or at least protected to stop and further peeling (forgot to take a photo, so I will add this tonight)

I need a standard door hung into a space that used to have a door and knob door handle inserted Some might need to be shaved off the top of the door Hinges, door knob provided

Looking for a quote to hang 6 internal doors - all hardware & doors supplied. I also have an archway that I’d like squared off and a door hung there as well. Hardware and door supplied. I also have a barn door that needs hung - all hardware and door supplied Located in St Ives, 2075 Thank you

I've removed 5 internal doors so I could tile my house and now they need to be planed 15-20mm and re-hung. I believe 2 doors may fit without planing so only 3 require planing. I've also got the existing screws and the doors are labeled to where they previously were. Thanks ! Doors are hollow also

Need to replace door frame and the door.

Supply and install internal door using existing hardware

Hi, I need the following task completed: 1. Remove 2 x hollow core doors from the two bedrooms 2. Remove the hooks on the back of these doors and the door stop (these are to be re-used on the new doors) 3. Install 2 x solid core internal doors with 3 hinges per door 4. Install new handles on each door and reinstall the hooks and door stop 5. Take away and dispose of the 2 x hollow core doors The door frame is wood We live in an apartment on the second floor. There is a balcony and a garage available if cutting needs to occur (access via stairs only). Ideally would like completed tomorrow, 17 March 2024. Otherwise, available 18/3, 21/3 and 22/3 Please let me know if you have further questions.

Remove internal door and replace with new one. I will be using the old hardware on the new door. New door is painted but will need all holes cut for handle, hinges etc.

I need an experienced personal to come and adjust 3 internal doors. They probably don’t need to be rehung just adjusted more than I can do. I am flexible with time and day to do this task. Thank you..

There are two spots where at the bottom of my internal door frame, rotten timber needs to be patched or repaired.