Find experienced local carpenters in Sunshine Coast

Caloundra Qld 4551 Cupboard/ draws for our Van, can be made & fastened in your choice, below is a measure that we got done, only part of it, will send to right person.… Lath 838 toinh- 960 945 33ck Depth 430 Drawer 1 (top) 15b 3260 Benchtop permanentiv toed clearance for undersink a.c. esc Flush to exisung benchtou Square check, Within so ase or ply Tenim thick 1200 x 2400 she 7.8 so der sheet Batten aporox 9 Linesi 42x35mm untreated oine 30 per hr We can buy or pay for materials, unless you stock ya own…

Ad expired, reposting timber battons on the front and side of the home, the deck at the front also and facade All required sanding and re-staining ( dark ) Thanks

Absco Sheds 1.52 x 1.52 x 1.49m Monument Pool Pump Cover, needs to be bolted into concrete. - Due date: Flexible

Seeking a builder/ carpenter that is looking for some extra work on the weekends. Converting container into an office. Someone with experience with this would be ideal and has a bit of lateral thinking..

I need to have our shed divided into two spaces using plastic dust sheeting (I can provide from Bunnings or be guided by person if other material more suitable. The shed is around 6M in height so will require very long/large ladder. Two person job

- Supply and repair/install of timber sill area where shutters were taken away on balcony. - Prep area for painter to follow in behind

Hi, I’m renovating a donga, and need to have a doorway built in. Internal door put on and Wardrobe built in for now. There may be extra jobs to be done but would like those done ASAP. I am open to negotiating a suitable price. Thanks

3x3 easy shed onsite and need to be put together and bolted to ground.

Need a Carpenter to help install a timber floor frame and sheeting over.

I'd like to do some small renovations on my 3 bed apartment while living on-site. Kitchen, bathroom etc. I need some help from a qualified carpenter to discuss my options and then know the best place to start for planning and deciding on what's realistic within my budget.

We just had new flooring installed in our house and some of our doors did not have enough clearance for the height of the new floors, so we have had to take the doors off and need the bottoms trimmed back so that they fit again. Some doors seems to only need a few mm off and others could do with a couple cm trimmed. Looking for a carpenter to help us with this job, and future jobs too when we are ready for them, while we slowly fix up our older house to feel modern again! I added some pictures to show the bottom of the door and the height jump of new floor. We have four doors in total that need trimming. Two of them are our toilet and bathroom doors so earlier offers will be favoured! 😅

Needing some guidance on what it would cost to remove this built in wardrobe to give more floor space. Replacing with new plasterboard and trims around the ceiling, replacing skirting and adding vinyl flooring I have left over from our floors being installed. Wardrobe size is approximately 157cm wide 61cm deep Located Caloundra West

Would like a cheap solution like IKEA. Would like to fit this wardrobe out with combination of drawers, shelves and hanging rods. Refer photo of idea. Everything to be behind sliding door (as we are not changing doors). Quote is for helping plan and installing. I’m happy to send you measurements

A bunnings garden shed needs to be built at a child care centre

Handyman/Carpenter to help onsite with a defit and reinstall of TV screens

Replace 7 x 6.0m polycarbonate sheets on a patio. Screwing into timber. All materials supplied. Quote is for labour. Thanks 👍

Need a carpenter for few odd jobs around the house - prefer an hourly rate

We have an easy shed bike shed which needs assembly and installation. It's 2.25m x 0.78m link to shed: https://easyshed.com.au/products/garden-bike-shed-2-25m-w-x-0-78m-d-classic

Construct a 3m x 3m easy shed onto an existing concrete slab. fix down with dyna bolts and brackets, silicone around base. - Due date: Flexible

Three jobs to be done. 1. Assemble and install a flat packed shed (1.5m x 1.5m). This includes preparing the base. Crusher dust, 16 x 40cm concrete pavers and paving sand provided. Picture of shed in pics. 2. Install 4 x window slat awnings. Awning sizes in pic (2 x large windows, 2 x small). 3. Assemble and install garden bed - Due date: Flexible