Find experienced local tradies in Bardon

12m of balustrade and handrail replacement required on front stairs and deck of two story Queenslander. 4x4 posts are in good condition but 1or 2 may need replacing. Painting required to protect against full sun and rain.

Clean deck balustrade and rails. A bucket and soapy water will do it. I just don’t have time right now! - Due date: Flexible

Render 2.4 x .6 block wall both sides and two piers 1.8 x .3 both sides and ends. - Due date: Flexible

2.4 x .6 block wall , two sides and ends, 2 x 1.8 x .3 piers , Screen blocks in between don’t require render

3 x coats of paint on front wall, approx 300sqm in total for all coats (25 linear meters long). 3 x coats of paint on 1 x iron gate. I will provide paint, rollers, brushes, drop sheets. Walls and gate will be cleaned and prepped, just turn up and paint. - Due date: Needs to be done on Tuesday, 22 August 2023

Finish painting external stairs, balustrades, single flight. Paint supplied. Neat job required! First coat already on, Just need glory coat! - Due date: Flexible

I have a window that needs repairing - it's a 3 vertically stacked awning window - the hinges have broken and the three panels of the window are sitting quite precariously in the frame. I need the hinges replaced and the panels reset. Thanks! - Due date: Flexible

Need the face of a block work wall rendered. 15.2 m2 is the area size that needs to be rendered. The top of the wall / the sides and the opposite side of the wall have already been rendered. Just need this face to be rendered. - Due date: Flexible

I removed my air con box and now need the window srewed back into the hole. It is just the type you push outwards to open, seems like the hinge arm might need two screws/bolts each side - Due date: Flexible

Render a was 1.2m x 9m. One sided. No painting required. Cash job - Due date: Flexible

Wooden trim on fibre cement balustrade has rotted with the rain. Needs replacement. Up on the second storey so will need ladder access. Approx 6m length of trim to be replaced. Thank you! - Due date: Flexible

Render of ~9m x 1.5m concrete block retaining wall. Front (non-retained) side, top + small drop ~15cm on back (retained) side. The wall has 2 x expansion joints + weep holes. No painting required. - Due date: Flexible

One of our outdoor patio folding arm awning does not turn (possibly service gearbox / clean). The crank Gear Box needs replacement (and parts sourced, possibly something like https://sunwiseblinds.com.au/shop/gear-box-awning-winder-crank-gear-box-external-awning-blind-part/).

I have a decking railing, it needs to be cut to size and installed. The old railing needs to be removed. Would be a job that required 15 to 30 minutes maximum in you are an experienced carpenter/handyman. - Due date: ASAP

Paint the walls around my pool in a white Colour (I have the paint). Wall is 1.75 high and 9.2 metres length in total. You may need to get into the pool and use a long roller to do directly around the pool plus get a neat edging around the tiles on top of pool.

Important to hide any trace of it. In this case, the job can be considered as done. - Due date: Before Wednesday, 6th Oct 2021

Need handyman / carpenter or like to help update house front porch with combination of balustrade and railing and screening. See pics for Roughly 15m span

Have replaced 2 aluminium down pipes with PVC and need to patch up the rendering. No need to paint. Downpipes can be unscrewed from brackets and taken off to render. Will need rendering materials included in price. One area approx 2.5m x 0.1m. Other is approx 2m x 0.05m (but will need to remove some of the rough edges of existing rendering). Small area to patch at bottom of third downpipe. Date is flexible.

Looking for a handy man to sand and varnish deck. Also, sand and paint the balustrades white. Happy to reimburse for varnish and paint. Time is flexible- anytime next week would work. Also available on Sunday if that suits.

Hi - looking for someone to sand and paint my verandah lattice doors. They are currently varnished so will either need to be sanded back OR primed and repainted. I have the paint but you will need the brushes etc. If you have any questions let me know.