Find a professional balustrading contractor in Sydney Northern Beaches

I need someone to assess, provide and install a post at both ends of our glass pool balustrade for additional support. Metal rails need to be supported by new posts (no post at the moment). Happy to also get a quote for the post and to pay extra for it.

We are looking to have a balustrade installed in our staircase. We'd like wooden panels and a handrail. - Due date: Before Saturday, 17 February 2024

I require timber posts installed on existing stairway balustrade. Requires approximately 35 timber posts cut and nailed to balustrade. Approximately 850mm high posts. I will provide timber pre painted. - Due date: Flexible

All paint and equipment provided. Outdoor undercover area made from bricks plus surrounding fencing. Plus Steps and path to front door. Few other touch up areas. Covering up a really bad paint job by previous owners where the wrong paint was used and peeling off - Due date: Flexible

Reconstruct indoor balustrade with glass - Due date: Flexible

Paint slatted sides of under deck and balustrade on deck and stairs. They are already painted in some sections and new blue sections are already primed. We will supply paint. - Due date: Before Saturday, 16 September 2023

I need three verandah glass panels removed. This will require: Cutting stainless steel balustrade at join Removing glass panels safely Removing fixings Adding rectangular stainless steel ends to balustrades as pictured Rendering and painting wall. (Paint provided) Removal of all items Leave area clean and tidy - Due date: Before Saturday, 1 July 2023

We require balustrade installers, glass and aluminium systems and frameless. Jobs vary all over Sydney, can give full time work/constant jobs - Due date: Flexible

Install balustrade on front deck, 2 side gates, timber screen in carport. Also make good carport supports - Due date: Flexible

Paint balustrade white 2 coats. Full height 2.5m - Due date: Before Sunday, 19 March 2023

Need to reinstall some stainless steel balustrade on restaurant floor. Length 4.8 meters Height 950mm Need wire in between See picture for type and finish Need similar finish - Due date: Flexible

Balcony glass has a lean. i think new timber under the deck have to be fitted. - Due date: Flexible

I require a handyman to repair a post on the balustrade on the front desk. It just one post which is wobbly - Due date: Flexible

Need a carpenter to install wires for balustrades approx 8 balustrades approx 2 metres long ten each All wires and accessories already bought and ready to go , all the d clips have been screwed to the posts already just need wires installed - Due date: Before Thursday, 29 December 2022

The glass balustrade broke in the front of our house. We have removed a lot of pieces. Need someone to remove the remaining pieces of the broken glass. - Due date: Flexible

Small 3.6meter deck has slatted aluminum balustrade that blocks the view. I would like it removed and replaced with a cable wire balustrade. - Due date: Flexible

Remove this balustrade from deck. Will require cutting and careful dismantling, as it is above pool. No need to remove end product from site - Due date: Flexible

Hello, We would like to have a new clear glass balustrade installed on our balcony which matches our previously installed railing on the ramp leading to the balcony. Here are the details of what we require: -12 mm glass balustrade on two sides of a balcony. -Height of balustrade to be 1050mm off floor. -Long edge of balcony is 4648mm from edge of tile to wall. This would require 3 panels of suitable length. Three panels of 1500mm wide each should be suitable. -Short edge of balcony is 1475mm from edge of tile to the rendered post. So a panel of 1300mm wide should be suitable. -Stainless steel top mount rail that matches previous railing to balcony which is round 38mm diameter slimline top mount rail 316 stainless satin. -One corner of the top mount rail needs to be joined by either welding or joined together with 90 degree joint piece that can be attached with epoxy or welded. -The spigots (2205 stainless) should be similar to the previous spigots on the ramp, and are to be core drilled. So a total of 8 holes and 8 spigots. Attached with epoxy grout. -Railing to be bracketed to wall at both ends. -See red lines in photos to see approximate location of new balustrade required.

I have 2 staircases which require installation of posts with raked panels. One stair case will is one panel and the other 2 each side. 2 pieces of glass - one 600 wide and the other 1500 wide. Each panel connects to the stair post using these - https://www.fencingcomponents.com.au/shop/product/bp-002-bracket-kit-for-raked-panel-4-sets-carton-texture-black-4709?search=rake+bracket&order=sales_count_stored+desc#attr= Video for install: https://drive.google.com/file/d/1Y95BAHaKnhdp_sUDZ1n641ee-cGL0Q1m/view - Due date: Before Thursday, 14 July 2022

Post is 113cm high and requires replacement due to rotting - to be connected back into the balustrade so it’s strong and secure. Small section of horizontal base rail was rotting also, so needs connecting to the post. Quote to include parts and labour please - carpenter or builder preferred.