Find a professional balustrading contractor in North Brisbane

Need to re-attach landing balustrades. I have all the balustrades. Just don’t have the tools (ie nail gun etc.)

Our next door mower man accidently cut through our steel balustrade fence. Need two wires replaced.

Need approx 25 lineal metres of timber balustrade sanding ready for oiling (we will oil ourselves) It’s 42x42mm spotted gum battens so a bit fiddly and on first floor so ladder set up required too and own sander.

Remove existing timber and lattice and replace with aluminium

The first photo shows my current dated balustrade I’m keen to have it replaced with a vertical stringer style similar to the second photo (in black timber), I’d also like a matching handrail along the wall. If this is not possible I’m happy to do a simple wire balustrade with built in handrail instead - Due date: Before Saturday, 24 February 2024

Balconys on 4 units + a stairwell in a unit complex in Kedron have mutliple areas on balustrades that need replacing/repairing due to rust. Looking for someone to inspect and quote on job. Attached are some photos of examples. - Due date: Flexible

Repair Balustrade on stairs to Deck

I need to redo my indoor stairs. I will remove the carpet but need a carpenter to check status and repair. Materials provided as requested, and will support you on handy work. - Due date: Flexible

We are currently doing some renovation where we have removed some walls alongside our internal stairs all the way up to the second floor. As you can see in the photos as a result of the removed walls we now have one side of the stairs and right above the stairs on the second floor requiring wire balustrading. We are going to have vertical balustrading all the way from the stairs timber beam all the way up to the second-floor balustrade handrails. I have provided you with the exact diagram and exact measurements for clarity about what exactly needs to happen for this wire balustrading. The straight section above the stairs is longer than the stairs as shown in the photos and drawing. Therefore, a small part of the second floor will require its own balustrade threads to be installed. If you have any questions please let me know. All materials will be provided unless you want to offer a good stainless steel wire with all fixtures which I will pay for that if the price is reasonable. Therefore, below tasks needs to be completed: 1- Vertical stainless steel balustrade installation as shown in the drawing and actual photos of the stairs and second-floor areas. 2- Installation of the additional 130 cm on the left side and 30 cm on the right side vertical wire balustrading as shown on the drawing. 3- Installation of timber handrails and requires posts on the second floor as required to be compliant with Australian standards. This task should usually not take more than 5 hours if you are qualified and an expert in these wire balustrading. Please note that you must be familiar with balustrading standards to ensure the installation safety complies. NOTE: I have already secured supplies for this task, however, I am looking for the right handrails and posts. Once the right person is assigned to this task we can discuss what timber handrails and posts we can buy to match the wire materials for internal use. - Due date: prior to 10th April

I am looking to change my balustrade T the front of my house to a white timber old qlder look - Due date: Flexible

Paint balustrade on deck/ slatted screening, paint kitchen dowels and two small walls paint powder room prep work is all done and paint supplied - Due date: Before Sunday, 19 February 2023

Wire balustrade approx 5.5 LM . Nundah for next Tuesday 20th

Stairs balustrades and stringers are rough and inconsistently stained Need sanding and restaining - Due date: Flexible

Please help to fix this asap

Looking to modernize existing balaustrade. We want to replace spindles on stair railings to square spindles and change capping to square capping. No painting required, only replacement of spindles and capping. - Due date: Flexible

Current balustrade has rotted. Need full replacement. - Due date: Flexible

Construct a screen of spaced slats to eastern side of raised deck Refer to photos for slats to match existing construction on western side of raised deck above metal balistrade. Central Upright annexed to existing (balistrade) upright 90 x 90 x 1200mm Slats Qty 16 W 19mm x H 90mm X L 2700mm plus some miscellaneous upright skirting timber. Timber to be Kwila (Merbau) - Due date: Flexible

Needing a new balustrade on our back verandah as soon as possible as the current old 1950’s lattice is not safe. We have been quoted $4500 by two builders but neither can get it done until December which isn’t ideal with a kid around the house. The design we are after is 30mmx30mm pailings with 30mm gap in between. With a top horizontal rail around 100m wide (wide enough to put a coffee cup on.) Verandah is quite small- approximately 3m by 9m. We also need a gate at the top of the stairs to stop the little one from falling down. For privacy, one side of the verandah will have the vertical 30mmx30mm pailings going almost all the way up to the roof. We are happy to do all the painting we just need someone to build it. Please see photos of current verandah and the design inspiration.

Repair and re attach fallen balustrade to existing structure

We have had a spiral staircase installed and need to Install a timber post and reconnect balustrade on our deck.