Polish floor boards

Posted by Thai T.


Cairnlea, Victoria, Australia

View map
Due date
Sunday, 20th Aug 2017
Hi there need to get my floor boards polished . It's has 5 mm timber Veneer on top only . Not full timber boards . Need to sand down and polishing to existing area .
Jaychob F.
81%Completion rate

The percentage of accepted tasks this Tasker has completed.

Offer to sand back, seal and cost with 2 coats of your preferred sealer. U might have to sand the whole
Be aware u can very easily damage with sander if inexperienced. Must have machine moving when slowly lowering the drum while proceeding to sand
Sand with drum sander start with a 60grit and once stripped you can then use 80grit and final sanding with 120Grit. U will need edger for the edges or can use a belt sander. Same process with grits. U will need a polyvac machine (orbital sander) for buffing. Must have floors all dust free before applying finishing 2 coats of polyurethane or water based
Thai T.poster
Ok thanks . How do I do it myself ?
If its your place Its cheaper to do yourself and not too difficult. But to have someone come for such a small job could be 3-500 depending
Thai T.poster
Hi it's just about 3 metres . Just a Matt finish. Same as the rest of the house
0 new tasks