A white van parked on a street, with a person standing next to it, ready to load or unload items.
A white van parked on a street, with a person standing next to it, ready to load or unload items.

Find a professional hot water system contractor in Perth

Fill in a short form and get free quotes for local hot water system contractors in Perth


Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Perth

Excellent diagnosing job by Richard.

Hot water unit not working


A great professional service, thanks Duncan.

Install Dux gas hot water system


Prompt, professional

Connect 240v power on hot water system


Soren did a careful, thorough job fixing a leak in our hot water system as well as fixing two broken taps. Communication was good . Would recommend.

Leaking valve - hot water system,tap fitting loose


Excellent job. Easy communication and friendly. Thanks Gary.

Replace Instantaneous Hot Water System


Bryan was thorough and honest. Even did an extra small task for us. Will use him again!

Check hot water system


What's the average cost of a hot water system installer in Perth

$145 - $476







Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Perth

based on 18 reviews



What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Perth

Hot water doesn’t start


Wembley WA, Australia

3rd Dec 2023

The hot water system need to be restart manually - Due date: Needs to be done on Monday, 4 December 2023

Hot water system


Mount Lawley WA, Australia

23rd Nov 2023

I need a small under sink electric hot water system replaced. I would prefer something smaller than I currently have as I literally have it turned off and don't use - it just takes up space. - Due date: Flexible

I was very happy with the service from Daniel. I was very surprised at how conscientious he was; he wanted to do a good job rather than rush things. Highly recommend.

Hot water looked at and filter water connected


Subiaco WA, Australia

3rd Nov 2023

Hi we've just moved into a new office, have an existing filter tap seperate to main kitchen sink mixer, and the water filter tap looks disconnected and there are no pre existing filters to connect to. We also have a hot water problem in our other office that we would need looked at. - Due date: Flexible

Plumber needed to repair hot water system


Perth WA, Australia

15th Sep 2023

Looks to be like a water leak coming from the tank of the solar hot water system. Needs repair asap. No idea on budget so please quote accordingly. - Due date: Needs to be done on Friday, 15 September 2023

Replace broken valve on Vulcan Electric Hot water storage


Perth WA 6000, Australia

25th Aug 2023

I believe the tempting valve in not working on hot water release pull has come off / broken The hot water gets very hot now , that’s why I believe its the tempting valve Please price for replacement tempting valve if this one cannot be fixed Thanks - Due date: Before Tuesday, 29 August 2023

Great Job ,Steve Very efficient Very polite and cleaned up everything Thanks

Replace my hot water system 50L Rheem


West Perth WA, Australia

17th Aug 2023

50L Rheem hot water system needs replacing, i need someone to supply and install a new one. - Due date: Before Tuesday, 22 August 2023

Installation of Instantaneous Gas Hot Water Unit


Shenton Park WA 6008, Australia

16th Aug 2023

Currently have a Rinnai Infinity 26 gas hws and I need a Rinnai B26 installed . Installation Only. - Due date: Before Friday, 25 August 2023

Sink connected to hot water system


Northbridge WA, Australia

2nd Aug 2023

Hey mate, I need a sink connected to the hot water system. It is 3 metres away more or less.

Remove inactive solar hot water system from flat roof (2nd story)


Subiaco WA, Australia

29th Jul 2023

Solar hot water system (tank and 2x panels) is inactive on second story of house. On flat concrete roof. Needs to be removed to allow new solar panel installation. - Due date: Flexible

Fantastic job done by John. Was a tricky solar hot water system removal using crane. Communicated well throughout and cleaned up afterwards. Highly recommend.

Plumber to look at hot water tank for possible leaks


East Perth WA, Australia

29th Jul 2023

Hot water system has a leak. - Due date: Before Friday, 4 August 2023

Hot water unit fixing


East Perth WA, Australia

5th Jun 2023

No hot water from the hot water unit - Due date: Needs to be done on Tuesday, 6 June 2023

Hot water system 50 litter rheem


East Perth WA 6004, Australia

22nd May 2023

Can you please give a price on fitting new rheem hot water tank 50 litter asap - Due date: Before Tuesday, 23 May 2023

Good job and very nice man I use him again to do my work

Require to get my 50L hot water system replaced.


Subiaco WA, Australia

20th May 2023

Require to get a 50L hot water system replaced. Needing to get the old one removed and new one installed. Seems like it would be a fairly vanilla installation. would love to be quoted for labour only please. Also ideally would like to have a couple of days between decommissioning and removal of old system, and the subsequent replacement with a new system. I would like to take the opportunity of having access to the walls to patch, fix up, and re-paint them whilst there is no hot water system in the way. - Due date: Flexible

Absolutely excellent customer service. Kevin went above and beyond and did a killer hot water system installation in a tricky environment. Would highly recommend.

Fix water leak and hot water system


Bedford WA 6052, Australia

8th Apr 2023

Pipe leaking out of wilson super x hot water system and into brick wall. - Due date: Needs to be done on Saturday, 8 April 2023

Collect electric hot water system


Nedlands WA, Australia

26th Jan 2023

Are you available tomorrow in Nedlands after 1pm? Need help to collect electric Hot water system.( (Already hot water circus installed .) Unit name is call: Rheem 125 litre Electric Hot Water Heater Thank you :) Ting - Due date: Before Saturday, 28 January 2023

Fix gas hot water system


Wembley WA, Australia

21st Nov 2022

I have a gas water heater at a new house I just bought that I can't seem to get the pilot flame ignited. The gas is flowing as the stove works. It’s a Rheem system. - Due date: Needs to be done on Tuesday, 22 November 2022

Kevin was attentive and prompt, and explained the issues well

Pipe issue and hot water system.


Perth WA, Australia

7th Sep 2022

Need 2 issues addressed: 1. When washing machine drains, water shoots out of the top of the left side pipe which is open on top for the smaller pipe to drip into. 2. Outlet is leaking on Aquamax hot water system. See photos attached.

Plumber to fix instantaneous hot water system


Mount Lawley WA, Australia

31st Aug 2022

Hello. Need a plumber to check my hot water system and see if they can get it working or if I need a replacement. Have no hot water so it’s urgent 😂 - Due date: Needs to be done on Thursday, 1 September 2022

Replace leaking valve on hot water system


Dalkeith WA, Australia

6th Jul 2022

I have a hot water system which has a leaking valve at the base. About 100ml per minute and has been going on continuously ( as far as I can tell ) for a few weeks. I assume it needs a new valve and would like the Airtasker to provide this. It is a 4-5 year old Rheem Stellar gas system and it is , I think, the lowest bit of the pressure relief valve ( ie. the bit with screw lines on it at the base of the valve), that the leak seams to be coming from, but please look at the photos, as I could be wrong about the exact source. - Due date: Before Saturday, 9 July 2022

Very efficient. Excellent , quick communication. Thanks very much.

Gas heater service, gas hot water check


Yokine WA, Australia

20th Apr 2022

We need someone to service our inbuilt gas heater, and to take a look at our gas hot water system. The water system is working but we have noticed a small external leak.