A white van parked on a street, with a person standing next to it, ready to load or unload items.
A white van parked on a street, with a person standing next to it, ready to load or unload items.

Find a professional hot water system contractor in Parramatta

Fill in a short form and get free quotes for local hot water system contractors in Parramatta

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Parramatta

Job in a professional manner

Hot water system check

$70

Abbas is exceptional and always go above and beyond desired. Thanks Abbas loved your work

Help fix the handle of Hot Water Tap

$100

Bill came on time, completed the job well, honest and hard working guy. Would highly recommend and use again. Thanks for your help

Supply and Install 135l Gas Hot Water System

$100

Top professional, really knew what he was doing. Would happily refer him to anyone

Hot water tank - Fix/Replace

$100

Great job. Quick and hassle free. Highly recommend.

Examine and maybe repair hot water tank today

$60

Awesome service quick

Replace valve on solar hot water and leaky toilet

$100

What's the average cost of a hot water system installer in Parramatta

$100 - $200

low

$100

median

$150

high

$200

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Parramatta

based on 58 reviews

4.88

54
3
0
0
1

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $0

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Parramatta

Hot water system diagnosis and repair

$220

Guildford NSW, Australia

23rd Mar 2024

My gas hot water boiler suddenly stopped working. No idea why. I tried turning it back on as per manual but the pilot light wont light up. Need a plumber or gas professional to check what is going on. Job is to come and diagnose problem and let me know what repairs are needed (or if replacement is needed).

Good communication and professional

Plumber to replace electric hot water system in Ermington

$300

Ermington NSW 2115, Australia

12th Mar 2024

I require a licenced plumber to swap out an electric hot water system with a new system, including plumbing and electrical. I will supply the new HWS. The existing system is a Dux proflo 250L (2005 model) and the new system will also be a Dux proflow 250L. Include in your quote all labour and parts required (other than the HWS which I will provide). See attached photos. There is an existing slab underneath the HWS.

Disconnect hot water

$180

Lidcombe NSW 2141, Australia

1st Mar 2024

I am doing a kitchen Reno and need help to disconnect the hot water system under the cabinet. Location is Lidcombe. Please let me know if you can help.

Great work. Highly recommended.

Pick up hot water system Carlingford

$75

Carlingford NSW, Australia

7th Feb 2024

Pick up hot water Carlingford Must disconnect first . Deliver to sought windsor 250 litre

Hot water system burst and the whole apartment flooded

$300

Westmead NSW 2145, Australia

20th Jan 2024

Hi the hot water system bursted and it flooded the whole room. - Due date: Needs to be done on Sunday, 21 January 2024

Great guy. Enjoyed doing business with him

Switch on hot water heater

$30

Wentworthville NSW 2145, Australia

19th Jan 2024

I need someone to come to wentworthville to switch on this water heater We moved into a new place and it hasn't been switched on yet and we don't know how to switch it on

Hot water not coming

$300

Merrylands NSW, Australia

20th Dec 2023

No hot water in the house, only cold water - Due date: Needs to be done on Thursday, 21 December 2023

Very good. He knew what he was doing.

Electric hot water timing change and join in main solar system

$10

Toongabbie NSW 2146, Australia

20th Nov 2023

We have solar hot water system on the property we bought. Then we got new 10kw solar panels on roof. We saw at midnight we get electricity usage which definately from hot water system. So we want this night time time change to day time for water heating and it should use main solar panel. What needs to be done for this. Our main purpose is to reduce electricity isage by hitwater sustem, so let me know options. - Due date: Before Monday, 18 December 2023

Hot water system

$1,200

Telopea NSW, Australia

19th Oct 2023

Need to remove the current hot water system -Rheem Stelar 160 L and replace it by the new hot water system. The new hot water system could be of any brand and functionality (Instantaneous / heat pump). - Due date: Flexible

Hot water system leaking at the bottom

$100

Wentworthville NSW, Australia

16th Oct 2023

Hot water system leaking at the bottom. Looking to repair and fix the leak. - Due date: Flexible

Hot water pipe issue

$100

Girraween NSW, Australia

13th Oct 2023

Hot water pipe started making noise and hot water flows much slower than before - Due date: Before Wednesday, 18 October 2023

Hot water installation

$50

Merrylands NSW 2160, Australia

15th Sep 2023

I need someone that can install hot water on a tap - Due date: Flexible

Hot water panel making water hammering

$120

Toongabbie NSW 2146, Australia

19th Aug 2023

Hot water panel mounted on the wall making water hammering noise ,when flush toilet downstairs. - Due date: Flexible

Hot water plumber

$49

Harris Park NSW, Australia

14th Aug 2023

Hot water is not working properly, after a minute the hot water stop coming and flows go down with chill water, hot water heater access available to inspect - Due date: Flexible

Nesat is helpful, highly professional and talk straight to the point. I’d highly recommend.

Install New Hot Water Unit

$1,111

Toongabbie NSW, Australia

8th Aug 2023

Replace Hot water unit. Removal of old unit and installation of new unit. - Due date: Before Thursday, 10 August 2023

Assess/Repair/service Bosch 18E continuous flow hot water unit

$200

Granville NSW, Australia

5th Aug 2023

Bosch 18E continuous flow hot water unit stopped working. No issues previously. Water, electricity and gas supply on and connected. Tried on and off and still not working. - Due date: Before Sunday, 6 August 2023

Great guy. On time and very professional. Would recommend

Fix hot water. Takes too long to heat & needs 2 taps to get to hot

$250

Wentworth Point NSW, Australia

23rd Jul 2023

Apartment taps and showers take too long for hot water to come through. We need 2 taps running at the same time to get hot. Shower at max hot is still cold. - Due date: Flexible

Really easy to communicate with, was very quick and efficient in resolving our issue.

Fix leaking hot water tap in bathroom

$100

Rosehill NSW, Australia

16th Jul 2023

Hot water tap is constantly leaking. Need it fixed. Need an invoice. - Due date: Needs to be done on Monday, 17 July 2023

Fixed my leaking tap. Excellent work. Very efficient.

Hot water leakage, both tank tube and roof tube

$100

卡靈福德 NSW, 澳大利亞

11th Jul 2023

I got an electric hot water system with tube leading to the roof absorbing sunlight. Leakage was found in both tube on the roof and tube near the tank - Due date: Needs to be done on 2023年07月11日 星期二

Very fast professional and patient surely I will find him again.

Hot Water - Tempering Valve (check/replace)

$100

Toongabbie NSW 2146, Australia

30th Jun 2023

Need licensed plumber to check and FIX the tempering valve for Hot Water system. The water is coming lukewarm in the house for past couple of days. Electrician has already checked the Thermostat and heating element. Please see the attached images of the tempering valve and 250L Rheem system. Let me know if further details are required. Cheers - Due date: Before Saturday, 1 July 2023

Fantastic work done by Patrick We done mate