A white van parked on a street, with a person standing next to it, ready to load or unload items.
A white van parked on a street, with a person standing next to it, ready to load or unload items.

Find a professional hot water system contractor in North West Melbourne

Fill in a short form and get free quotes for local hot water system contractors in North West Melbourne

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in North West Melbourne

Efficient, friendly service. Prompt and reliable.

Leaking shower head and bath sink hot water tap

$50

Attentive and genuine. Thanks for helping.

Flush out my hot water heater, to clean out the se

$100

Mark are prompt and easy to communicate fast respond. He installed a new hot water system Vulcan and he did a brilliant job. Recommended. 5 star!!

Hot Water System Replacement Quote

$800

Daniel was very professional, great communication and great work Thanks Daniel

Change Pressure Relief Valve on Hot Water Unit

$100

Provided quotes for installing new hot water system

Repair Hot Water Tank

$150

Did a great job. Quick. on time and a nice guy to deal with.

Solar hot water system repair

$200

What's the average cost of a hot water system installer in North West Melbourne

$107 - $260

low

$107

median

$187

high

$260

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in North West Melbourne

based on 63 reviews

4.98

62
1
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $0

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in North West Melbourne

Fix the leak in the hot water system

$150

Craigieburn VIC 3064, Australia

25th Mar 2024

There's a leak in my hot water system

Hot water coming flow is slow through kitchen sink pipe,bathroom pipe,

$100

Dallas VIC 3047, Australia

24th Mar 2024

We are observing the speed of hot water has decreased in our bathroom and kitchen.

Excellent service it was really great

Hot water system is leaking and needs to be replaced.

$850

Keilor Park VIC, Australia

19th Mar 2024

Plumber: The kitchen area in my small office has been flooded due to the hot water system leak. I need someone to come and repair/replace the system. ASAP. See photo attached.

My hot water system pipe is leaking

$40

Craigieburn VIC, Australia

6th Mar 2024

My hot water system pipe is leaking,replaced it twice but it always end up leaking.

Mark, has been an absolute pleasure to deal with.

Remove Hot Water Services From My Factory

$15

Tullamarine VIC, Australia

18th Feb 2024

Remove rubbish of used hot water services from my factory

Quick to respond and quick to get the job done

Hot water system repair - turns off everyday

$200

Roxburgh Park VIC 3064, Australia

25th Jan 2024

Dux proflo hot water system (gas) turns off itself. Sometimes it lasts a few weeks but lately have to turn on everyday. It could be just thermocouple. - Due date: Before Wednesday, 31 January 2024

Plumber needed to relight hot water system

$100

Coolaroo VIC, Australia

22nd Jan 2024

My hot water pilot light didn’t turn on. Need a plumber to relight a gas heater. It is Aqua Max hot water system. - Due date: Needs to be done on Tuesday, 23 January 2024

Fix leaking pipe to hot water serivce

$120

Oak Park VIC, Australia

18th Jan 2024

The water inlet pipe to the hot water service is leaking and needs to be fixed. - Due date: Before Sunday, 21 January 2024

James is a good lad and was very attentive in fixing the problem

Need a plumber to install hot water system

$200

Craigieburn VIC, Australia

9th Jan 2024

Looking for a plumber or handyman to install a new hot water system. I've already got the new system. Just need it mounted on the wall and 3 pipes connected to it. - Due date: Needs to be done on Wednesday, 10 January 2024

Fabian came out within 1 hour of hiring him for this task and completed the task within 30mins. Highly recommended. 5 stars from me

Hot water valve leak from the hot water service

$50

Craigieburn VIC 3064, Australia

7th Jan 2024

Please refer attached pictures of the hot water service - it looks like one of the valves is leaking water as pictured. not sure exactly what is the issue. The leak needs to be fixed - Due date: Flexible

Service Rinnai Hot water tank (Gas and Solar)

$200

Springfield VIC, Australia

23rd Dec 2023

General Service on a Rinnai Hot water tank/system, is heated by gas and solar. - Due date: Flexible

Hot water system repair

$500

Pascoe Vale VIC, Australia

16th Dec 2023

Electric hot water system installed within an enclosed space in kitchen cupboard has stopped working. Cannot access the hot water system without removing the cupboard walls. May potentially need to install a new electric hot water heater in a different location. Please have a plumbing badge verified on your account. Thanks - Due date: Needs to be done on Wednesday, 20 December 2023

Plumber to service hot water unit and a dishwasher

$5

Pascoe Vale VIC, Australia

13th Dec 2023

I need a qualified plumber to service our hot water unit (gas) which has not been used plus a 1 draw Fisher and Pykel dishwasher with error message F1. - Due date: Needs to be done on Saturday, 16 December 2023

Natural gas 135L Dux hot water cylinder installation

$200

Roxburgh Park VIC, Australia

7th Dec 2023

Need to detach current Dux hot water cylinder and install new one bought from bunnings. Will be delivered between 1-5pm. Honest quote. No extras. Happy to pay cash. Old cylinder can stay and does not need to be taken away for disposal. - Due date: Needs to be done on Friday, 8 December 2023

Excellent service. Highly recommend

Hot water box repaired

$50

Niddrie VIC, Australia

7th Dec 2023

The hot.water box inside the laudery cupboard us not warming the water. - Due date: Flexible

Relocation of hot water unit (one metre distance) see photos. $250-

$250

Attwood VIC 3049, Australia

1st Dec 2023

Relocation of hot water unit (one metre) $250- - Due date: Flexible

Light pilot light in gas hot water system

$80

Glenroy VIC 3046, Australia

28th Nov 2023

I need someone to re-light the pilot light in my gas hot water system. Bonus if you can tell me why it went out. - Due date: Needs to be done on Wednesday, 29 November 2023

Knows what he is doing!

The hot water of the property is not working properly

$150

Meadow Heights VIC, Australia

16th Nov 2023

The hot water of the property is not working properly and the water cools down quickly. This maintenance is urgent. Kitchen - Some of the cabinets are loose and are coming off the hinges - Due date: Before Saturday, 18 November 2023

Cody was a great tradesperson to deal with, he knows he’s stuff and will definitely use his services again.

Hot water heater anti tip & ptr drain extension

$200

Niddrie VIC, Australia

16th Nov 2023

I need some works to has appliances completed by a gas fitter: 1. Restraint (anti tip) for gas water heater and ptr drain extended 2. Restraint (anti tip) for upright stove - Due date: Before Wednesday, 22 November 2023

Friendly, professional and thorough. Michael arrived on time and completed the job quickly and efficiently. I would recommend and hire again.

Plumber to fix leaking solar hot water

$250

Gisborne VIC, Australia

31st Oct 2023

Solar panel is leaking water. Need a plumber to investigate the issue and repair - Due date: Needs to be done on Saturday, 4 November 2023

Greater communicator and did a great job! Highly recommend