A white van parked on a street, with a person standing next to it, ready to load or unload items.
A white van parked on a street, with a person standing next to it, ready to load or unload items.

Find a professional hot water system contractor in Baulkham Hills & Hawkesbury

Fill in a short form and get free quotes for local hot water system contractors in Baulkham Hills & Hawkesbury

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Baulkham Hills & Hawkesbury

Very knowledgeable, prompt and quick service.

To repair Hot water system.

$10

Fantastic job

Hot water checked and two shower heads replaced

$500

Well done, Steven.

Hot water tap leaking

$80

▀▄▀▄▀▄█▓▒░ PERFECT ░▒▓█▀▄▀▄▀▄▀

I need hot water system installation & repair

$250

Prompt service. Thanks Chris.

Fix leaking PTR valve on gas hot water system

$60

Thanks Costa. Highly recommend to others . Fixed everything and no more issues.

Hot water stopped - Plumber / water heating

$90

What's the average cost of a hot water system installer in Baulkham Hills & Hawkesbury

$78 - $200

low

$78

median

$150

high

$200

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Baulkham Hills & Hawkesbury

based on 30 reviews

4.87

29
0
0
0
1

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $0

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Baulkham Hills & Hawkesbury

Replace, Supply/install Hot water System

$5

Cherrybrook NSW 2126, Australia

19th Mar 2024

Hi there I am looking for someone who can give me the quote to replace, supply/install my current Hot water system to Rinnai B26 (New) Must be Licensed and can provide warranty.

Highly Recommended. Diego was on time and finished the job efficiently. Can't fault his service. I would definitely use him again for other tasks.

Diagnose issue with electric hot water heater system

$80

Glenhaven NSW, Australia

19th Mar 2024

The electric hot water system for backyard dwelling has stopped working. We only ever turn it on when we have guests stay with us - which was 6 months ago when it was working fine. Otherwise it is switched off at the powerpoint (which you can see in the attached image). I turned it back on over the weekend and it failed to heat the water - looking to have this diagnosed please. Water pressure is fine and there appears to be no power issues with the dwelling. Thank you.

Heat pump hot water electrical connection

$300

Baulkham Hills NSW, Australia

23rd Feb 2024

I have a plumber coming in to move my HWS but need a sparky to just extend the connection another 2-3m and reconnect the hot water system. Pictures of existing set up are on the job They are being moved right around the corner onto the pictured concrete slab. The move is going to happen around Wednesday 8am and will take about 4 hrs so will need reconnection work to happen around midday onwards.

Nice guy, punctual and work seems as good as I can tell. But as others have pointed out the price as advertised will not be the final price. Caution: we were charged for a lot of extra work we didn't think was necessary and our task turned into a multiple-thousand dollar job just so we could see the task even get completed.

Need to move a heatpump hot water tank

$800

Baulkham Hills NSW, Australia

22nd Feb 2024

I have a heat pump hot water tank and I need a licensed plumber and electrician to move it to a concrete slab where it's a bit more stable. I would like to reverse the orientation so the tank sit in the corner of the slab (see video) Located in Baulkham Hills

Removal of solar panels for hot water system

$300

Castle Hill NSW, Australia

29th Jan 2024

Removal of solar panels from the roof of two story building. System was malfunctioning so electricity was disconnected and it is like that for a while. - Due date: Before Monday, 5 February 2024

Removing solar panels for hot water system in a two storied house

$200

Castle Hill NSW, Australia

29th Jan 2024

I have a two storied terracotta tiled building at Castle Hill, Sydney. I would like to remove two existing hot water solar panels (marked with the blue cross in the image) which are not functioning for a long time . - Due date: Flexible

Remove and install new Electric Hot Water System

$5

Baulkham Hills NSW 2153, Australia

10th Jan 2024

Remove and install Hot Water System - Due date: Before Friday, 12 January 2024

Zip hot water repair

$150

Castle Hill NSW, Australia

14th Dec 2023

Tried to replace filter but water is not coming through - Due date: Before Wednesday, 20 December 2023

Really easy to deal with and came on time! Would definitely use again

Plumber required to re connect a gas hot water system

$100

Baulkham Hills NSW, Australia

9th Nov 2023

I’m need a plumber to reconnect a Hotwater system and test it after the copper was stolen around it. Jobs ready to go in Baulkham Hills - Due date: Flexible

Hot Water Leak

$200

Castle Hill NSW 2154, Australia

9th Oct 2023

Small hot water leak in outside hot water system. Drops leaking from outlet pipe - Due date: Before Tuesday, 10 October 2023

Great service, reliable, great work and awesome communication.

Hot water unit replaced

$200

Castle Hill NSW, Australia

15th Sep 2023

Replace this prehistoric hot water unit. It’s an under counter mini unit at an office. Please quote to supply and fit a new unit and take the old one away too. - Due date: Flexible

Greta job removing hot water tank for us

Plumber extension of gas , hot water pipe

$500

Gables NSW, Australia

18th Jul 2023

I need someone to help me with extension pipe for gas and water system in patio - Due date: Before Saturday, 29 July 2023

Fix or repair hot water system

$100

Kellyville NSW, Australia

29th Jun 2023

Looking for someone who can repair or fix hot water system. The hot water system just stopped working. Photos attached. Offers welcome - Due date: Before Thursday, 29 June 2023

Plumbing - need someone to fix my leaking hot water system

$100

Bella Vista NSW, Australia

14th Jun 2023

Leaking hot water system, hot water doesn't appear to be working. - Due date: Flexible

Adjust hot water temp (Showers)

$100

Castle Hill NSW, Australia

13th Jun 2023

2 story house, running a Rheem hot water gas system which seems to be working fine but not enough hot water going to the showers, need temperature adjusted so showers have full hot water (currently just luke warm)

Rheem Stella 360L gas hot water heater issue 30/05

$150

Kellyville NSW, Australia

29th May 2023

Installed less than 3 years ago It seems to be enough for one person shower at night. As hot water will run for 10seconds when the second person try to have a shower, then only weak cold water stream left. Also, it will be screeching noise sometimes when turning on the hot water. Sometimes, one of the bathrooms gets the hot water whilst the other bathroom only has cold water. Two storey house, problems started occur about a couple weeks ago and hot water usage appears to be reducing, from sufficient for two person shower to one at night. - Due date: Needs to be done on Tuesday, 30 May 2023

Dario is very friendly and get the job done in no time! High recommend!

Require Plumber to fix Hot Water Tap Pressure

$50

Box Hill NSW, Australia

26th May 2023

Require a plumber to fix hot water pressure in one of the bathroom taps - Due date: Flexible

Top Bloke, did a great Job, highly recommended will 100% use him again for any plumbing issues.

Fix leaking gas hot water system

$200

Baulkham Hills NSW, Australia

25th May 2023

We noticed a hot water system at a house that is currently not occupied leaking. It looks like there’s a pipe that’s got water coming out of it but we’re not sure where this pipe is connected to. There’s steam coming out on top as well. Hot water in the house is working fine but looks like there’s hot water leaking out of the hot water unit. The unit is outside on the side of the house and has some rust. Not sure what the cause and fix is so please review the photos we’ve taken and include in your offer: 1. When you can come 2. The cause of it and what you will do to fix it 3. What sort of access you need as no one lives in this house right now I’ve put a budget in as it need me to but please quote accordingly. You must be licensed - Due date: Flexible

Jamie did an amazing job with sorting the hot water system! He did the task promptly and was extremely courteous and thoughtful. I could not recommend anyone else for the job! Highly recommended!

Hot water system replaced

$5

Nelson NSW 2765, Australia

8th May 2023

need new hot water system - Due date: Needs to be done on Wednesday, 10 May 2023

Aidan was amazing! He came out to look at the issue first, helped identify the issue and then was able to fix it all within a timely manner. He was professional and very experienced. He was polite and honest. Highly recommend and will definitely be contacting him in the future for any plumbing works. Thank you so much aidan for all your help! Will never contact anyone else

Supply and replace a gas hot water system

$1,500

Castle Hill NSW, Australia

30th Apr 2023

Current one is 170L still working but water is a little brown. Please propose a heater about similar size. Open for instant gas heater option. - Due date: Flexible