Find a professional hot water system contractor in Baulkham Hills & Hawkesbury

Fill in a short form and get free quotes for local hot water system contractors in Baulkham Hills & Hawkesbury

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
Up to 50% cheaper than franchise dealers
No job too big or too small
No job too big or too small
Free insurance coverage
Free insurance coverage
Secure cashless payments
Secure cashless payments
Same day / next day service available
Same day / next day service available

Best rated Hot Water System Installers near me

Recent Hot Water System Installation & Repair reviews in Baulkham Hills & Hawkesbury

"Quick and timely service. Very professional."

Hot water heater leaking.

$5

"great work, highly recommend to everyone."

Fix hot water pipe leaking

$140

"Great and fast job done perfect"

Repair My Hot Water Boiler

$50

"Highly efficient trained professional. Finished the assigned job in time. He knows what he is doing. Will recommend to others too."

Rinnai Hot water system install

$375

"Excellent to work with , thanks"

Plumber ..No hot water but gas stove is working

$50

"very reliable, thx a lot"

Dump my old 400litre hot water system

$100

What's the average cost of a Hot Water System Installer in Baulkham Hills & Hawkesbury

$87 - $225

low

$87

median

$150

high

$225

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Baulkham Hills & Hawkesbury

based on 27 reviews

4.93

26
0
1
0
0

What is Airtasker?

1

Post your task

Post your task

Tell us what you need, it's FREE to post.

2

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

3

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available!
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Baulkham Hills & Hawkesbury

Plumber - Hot Water System not working

$150

Castle Hill NSW, Australia

31st Jul 2022

Looking for a plumber who can fix our Hotwater system temporally issue. Apparently this model seems old and started not working two days ago.I tried turning it off and on again once started it makes sound of operation and dropped off a few sec later. I was given a few quotes to replace it but wanted to see this can be simple fix rather than a replacement. - Due date: Before Wednesday, 3 August 2022

Fix eletric hot water system, low flow

$50

Castle Hill NSW, Australia

20th Jun 2022

Hi. The hot water system in my house is having issues. The hot water flow gets slow after 5 seconds. The water is still hot but with little pressure. It's affecting all outlets in the house. The tank is a 2017 350L model

Great service. Will use again

Hot water inlet to the tap in the vanity has a slow drip

$150

Cherrybrook NSW 2126, Australia

20th Apr 2022

the inlet carrying hot water to the tap in my vanity has a slow drip - Due date: TUESDAY 26/4,WED 27/4,THUR 28/4( AROUND MIDDAY)

Replace hot water system

$1,000

Castle Hill NSW, Australia

13th Jan 2022

Supply Rheem 315L duel elements and install, remove and take away the old one

Check hot water system which is leaking and replace if necessary

$1,000

Cherrybrook NSW, Australia

1st Dec 2021

hot water system is leaking.Check and replace if necessary - Due date: Flexible

Leaking gas hot water tank fixed or replaced

$400

Baulkham Hills NSW, Australia

26th Jul 2021

Existing Vulcan Freeloader Super 10 gas hot water tank leaking. Hot water leaking through the overflow copper pipe . It is 15 years old. Not sure if it is 135L or 170L capacity. Supply and install Request best offer.

Get rid of hot water heater

$5

Chatswood NSW, Australia

18th Jun 2021

Old hot water heater sitting in driveway. Need gone

Install electric hot water system

$2,800

Kellyville NSW 2155, Australia

27th Jun 2022

I have a new build house connected to LPG bottles for hot water. As I will shortly have solar panels I wanted to convert to electricity ~315L tank. Am looking for hot water system to go on a slab next to gas bottles ( ~5m from current recess for instant gas HWS). Ideally pipes can run down from recess and along line of house to be buried under landscaping. Electricity Meter is on opposite side of house. Electrical work needs to be done too to connect to tank. - Due date: Flexible

Small electric hot water system fix/replacement

$100

Glenwood NSW, Australia

6th Jun 2022

I have an electric hot water system that started leaking from the top and need a reliable plumber to take a look at it to fix or replace.

Connect hot water connection to right electricity meter

$200

East Kurrajong NSW 2758, Australia

19th Apr 2022

Our hot water is connecting to the wrong meter. We just want to connect with the right meter. Also, if you could install standard tv wall mount. - Due date: Flexible

Low water pressure with hot water

$150

West Pennant Hills NSW 2125, Australia

29th Dec 2021

Suffering very low hot water (tap) pressure with our current gas tank hot water system. Seems that when the ambient air temperature outside goes above 20c the hot water tap pressure drops.

Awesome results thanks Jake!

Hot water system

$5

Rouse Hill NSW 2155, Australia

1st Oct 2021

Hi, I need to replace hot water Rheem 170 external gas heater, with a new one. I need a quote for same new unit, installation and removal of old unit. - Due date: Before Monday, 4th Oct 2021

Rheem electric hot water system leaking - 80L

$200

Baulkham Hills NSW, Australia

12th Jul 2021

Hi Airtaskers, My Rheem electric hot water system for the apartment is leaking. Fortunately it is an electric system and a small one. Note that it was made in 2004, so may be due for a replacement. Offers are welcome, please see photos attached. Thanks, Reshad

400L Hot water system tank Removal.

$150

Cherrybrook NSW 2126, Australia

23rd Sep 2022

There is a decommission water tank need to be removal. Budget is A$150 Tank height is about 1.8m Cheers, Brady Wang

Cheers mate.

Solar hot water system repair

$200

Beaumont Hills NSW 2155, Australia

27th Jun 2022

No hot water and system is leaking

Install Hot water system, fix leak in roof and gutter clean

$5

Nelson NSW 2765, Australia

30th May 2022

Hi, I am after a fully licensed plumber who can supply and install a new hot water system. I also have a leak in my roof and need the gutters cleaned too. Would like a quote for these please - Due date: Flexible

AIDAN IS THE BEST PLUMBER I HAVE EVER HAD! We recently had another plumber from airtasker out who said they cleaned and fixed our gutter problem but they never did. Aidan took photos before and after to show us the job was completed and found the issue for a leak we had. He also supplied and installed a hot water unit for us and was so reasonably priced unlike other plumbers we recieved quotes from prior. While he was completing the jobs around our place he also quoted us for backyard drainage and again his prices are so reasonably priced we honestly feel like we have been ripped of prior to finding aidan! We will definitely be using him as our family plumber from now on! Thank you again aidan such a polite and honest plumber!

Disconect and move hot water tank 350mm forward and rotate 90 degrees

$250

Forest Glen NSW, Australia

28th Feb 2022

relocate hot water tank forward by 350 mm and rotate.building new structure and need the tank relocated for more spacedisconect and reconect copper pipes - Due date: Before Sunday, 6th Mar 2022

job completed to satisfaction

Plumber for leaking hot water tap in shower

$100

Baulkham Hills NSW, Australia

23rd Dec 2021

I need someone to repsir the keaking shower tap. The screw that holds the shower tap has snapped off.

Good job, well done! great communication.Thanks James

Repair a gas hot water tank

$179

Kellyville NSW 2155, Australia

24th Sep 2021

~2m tall Tall rectangular tank

Very quick and affordable

Electric hot water unit

$100

Sydney, NSW

23rd Jun 2021

The electric hot water unit does not work, I checked the board and apparently there is no electricity power, Need someone to have a look at it and fix it

He did a great job , definitely recommended